|Red Hat Enterprise Linux 3: Installation Guide for the x86, Itanium™, and AMD64 Architectures|
|Prev||Appendix C. Troubleshooting Your Installation of Red Hat Enterprise Linux||Next|
If the Mouse Not Detected screen (refer to Figure C-1) appears, then the installation program was not able to identify your mouse correctly.
You can choose to continue with the GUI installation or use the text mode installation, which does not require using a mouse. If you choose to continue with the GUI installation, you must provide the installation program with your mouse configuration information (refer to Section 4.14 Mouse Configuration).
There are some video cards that do not work properly with the installation program. The end result being a problem booting into the graphical installation program.
If the installation program does not run using its default settings, it will try to run in a lower resolution mode. If that still fails, the installation program attempts to run in text mode.
One possible solution is to try using the resolution= boot option. This option may be most helpful for laptop users. Refer to Appendix F Additional Boot Options for more information.
To disable frame buffer support and allow the installation program to run in text mode, try using the nofb boot option. This command may be necessary for accessibility with some screen reading hardware.