2013-04-09 Peter Breitenlohner <peb@mppmu.mpg.de>
* triptrap/mftrap.diffs, triptrap/trip.diffs: Update for TL 2013.
2013-03-27 Khaled Hosny <khaledhosny@eglug.org>
* texmfmp.h [XeTeX]: Temporary fix for building with Clang on Mac.
2013-03-26 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Drop duplicate KPSE_XPDF_FLAGS.
2013-03-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Reorder included Makefile fragments and drop the
obsolete luatexdir/am/liblua51.am.
* ac/web2c.ac: MetaPost now uses cairo.
2013-03-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Add luatexdir/am/liblua52.am for LuaTeX 0.75.0.
* configure.ac: New conditional USE_DLOPEN.
2013-03-11 Karl Berry <karl@tug.org>
* doc/web2c.texi (Initial TeX, Initial Metafont): initex
and inimf are present again (as of 2011). Report from Uwe Lueck.
2013-03-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* triptrap-sh: Drop duplicate header msg.
2013-02-15 Peter Breitenlohner <peb@mppmu.mpg.de>
Avoid spurious failures of parallel tests.
* pbibtex-longline-test.pl: Use longline.bib from source tree.
* bibtex-openout-test.pl: Fix the input file location.
2013-01-30 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am: Allow subdir-objects.
* configure.ac: Use KPSE_COND_MINGW32 and KPSE_WIN32_CALL.
2013-01-25 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Drop useless AC_TYPE_LONG_LONG_INT.
2013-01-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, am/texmf.am, configure.ac, trap.test, trip.test,
triptrap-sh: Enable parallel-tests.
2013-01-10 Khaled Hosny <khaledhosny@eglug.org>
* configure.ac: Check if system has stdbool.h
2013-01-06 Khaled Hosny <khaledhosny@eglug.org>
* texmfmp.h [XeTeX]: Support input pipes.
2013-01-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Check for hstrerror() needed by luaTeX.
2013-01-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Check if system defines and declares strndup().
2013-01-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h [XeTeX]: We must #include <zlib.h> and
<teckit/TECkit_Common.h> before "XeTeX_ext.h" to avoid typedef
duplications.
2013-01-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, am/bootstrap.am, am/cweb.am: Do not distribute
output from parallel-tests.
* configure.ac: Temporarily disable parallel-tests.
2012-12-17 Peter Breitenlohner <peb@mppmu.mpg.de>
* silent-sh: New shell script for some silent rules.
* configure.ac: Create silent-sh.
* Makefile.am (makecpool, tangle, tangleboot, ctangle, tie),
am/bootstrap.am, am/cweb.am, ctangleboot-sh.in, tangle-sh.in,
web2c-sh.in: Enable silent rules.
2012-12-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* w2c/config.h [MinGW32]: Define LONGINTEGER_{TYPE ,PRI} as for
native Windows, i.e., as __int64 and "I64".
2012-11-30 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, configure.ac: Add pixman, cairo, and harfbuzz
for future MetaPost and XeTeX.
2012-11-20 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: No need to check for Annot::decRefCnt with
poppler 0.18 or better.
* Makefile.am: Avoid use of deprecated INCLUDES.
2012-11-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/bootstrap.am: Add dependency of (c)tangleboot_OBJECTS on
(c)tangleboot_DEPENDENCIES.
2012-11-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Also drop the unused otangle.
2012-11-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Drop o_tangle, no longer used.
2012-11-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch: Move native buffer printing code from here ...
* enctex.ch: ... to here.
2012-11-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch: Avoid conflict with xetexdir/xetex.web.
Introduce Web macros check_quoted and print_quoted.
(cs_error): Move "endmubyte" code from here ...
* enctex.ch (cs_error): ... to here.
2012-10-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac (POPPLER): Adding '-lgdi32' for WIN32 now done
in KPSE_POPPLER_FLAGS (../../m4/kpse-poppler-flags.m4).
2012-10-12 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmp.h: Support pipe except for tex.
2012-10-09 Peter Breitenlohner <peb@mppmu.mpg.de>
* ac/web2c.ac (kpse_tex_progs): Remove obsdcompat.
* configure.ac: Remove KPSE_OBSDCOMPAT_FLAGS.
* Makefile.am: Remove OBSDCOMPAT_RULE.
2012-08-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac (AC_CHECK_FUNCS): Remove test for snprintf.
2012-07-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* w2c/config.h: Define LONGINTEGER_PRI instead of
LONGINTEGER_PRId, also to be used for unsigned quantities.
2012-07-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.ch, dvicopy.ch, dvitype.ch, gftodvi.ch, gftopk.ch,
gftype.ch, mft.ch, patgen.ch, pktogf.ch, pktype.ch, pltotf.ch,
pooltype.ch, tangle.ch, tftopl.ch, vftovp.ch, vptovf.ch,
weave.ch: Define and use my_name.
2012-07-15 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texextra.c: Must #define DLLPROC before reading texd.h.
2012-07-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* help.h (LUATANGLEHELP): Removed, luatangle no longer exists.
Use DEV_NULL instead of hard-coding /dev/null (from W32TeX).
2012-07-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* w2c/config.h: Define LONGINTEGER_{TYPE,PRId} for MSVC.
2012-06-30 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h [WIN32]: Ignore DLLPROC for __MINGW32__.
* texextra.c [W32TeX]: #define DLLPROC for tex.dll.
2012-05-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* dvicopy.test, dvitype.test: Cope with spaces in paths returned
by kpsewhich.
2012-05-12 Werner Lemberg <wl@gnu.org>
* patgen.ch: Fixed a typo causing weave to fail.
2012-05-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Drop obsolete poppler tests.
2012-04-12 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* bibtex.ch: Do not check whether ent_str_size > buf_size and
glob_str_size > buf_size, because buf_size can be changed dynamically,
whereas ent_str_size and glob_str_size are constants.
2012-04-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h (mk_shellcmdlist, init_shell_escape,
shell_cmd_is_allowed, normalize_quotes): Drop extern decls.
(get_seconds_and_micros): Declare only for pdfTeX.
(getrandomseed, callmakempx): Removed, MP only.
2012-03-04 Peter Breitenlohner <peb@mppmu.mpg.de>
Avoid 'differ in signedness' warnings.
* cpascal.h: Define ustringcast().
2012-02-16 Peter Breitenlohner <peb@mppmu.mpg.de>
* mf.ch, tex.ch: Remove test for end-of-file after undump.
* texmfmp.h: Remove weof().
2012-02-12 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmp.h: Remove old comments that gzFile is typedef'd as void *.
2012-02-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h: Moved WRITE_OUT from here ...
* cpascal.h: ... to here for use in GFtoDVI.
* gftodvi.ch (write_dvi): Done in C as for TeX.
* cpascal.h: Drop writechunk, GFtoDVI now uses writedvi.
2012-02-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* vftovp.ch: Allow arbitrarily large TFM files as in TFtoPL.
2012-02-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch, gftodvi.ch: Ensure dvi file size < 2GB.
* mf.ch: Ensure gf file size < 2GB.
* tftopl.ch: Remove unused constant tfm_size.
2012-01-24 Karl Berry <karl@tug.org>
* doc/web2c.texi (Common options): remove doc for the long-since
removed option -oem. Report from peb.
2012-01-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* pltotf.ch, vptovf.ch: Interpret "--" as "+", not "-".
2012-01-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* tftopl.ch, vftovp.ch: Add missing space in error message.
2012-01-18 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Check sizeof(off_t).
* w2c/config.h: Define LONGINTEGER_TYPE and LONGINTEGER_PRId.
2011-12-23 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac [OTANGLE]: For ovf2ovp and ovp2ovf (Web2C).
2011-12-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch: Consistency of `constants'.
2011-10-18 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac [WIN32]: Add `-lgdi32' to POPPLER_LIBS.
2011-10-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h (ENABLE_PIPES): New macro for pipe support.
2011-10-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Add poppler feature tests for luaTeX.
2011-10-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/web.am (DISTCLEANFILES): Preserve distributed files.
* Makefile.am (DISTCLEANFILES): Add CXXLD.sh.
* am/texmf.am (DISTCLEANFILES): Add write18-quote.log.
* am/web.am (DISTCLEANFILES): Add longline.{aux,bbl,bib,blg}.
2011-09-30 Peter Breitenlohner <peb@mp.mpg.de>
* tex.ch (print_file_line): Bug fix: avoid uninitialized lineno.
Patch and discussion from Karl, 21 Sep 2011 16:05:09 GMT.
2011-09-11 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmp-help.h: The option -kanji-internal=STRING is effective
also for pTeX and epTeX.
2011-08-29 Peter Breitenlohner <peb@mp.mpg.de>
* texmfmp.h [WIN32]: Allow to build TeX & Co as DLL.
2011-08-23 Peter Breitenlohner <peb@mp.mpg.de>
* triptrap-sh: Add uptrip and euptrip tests.
2011-08-20 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmem.h: upTeX uses Aleph-type memory words.
2011-08-19 Peter Breitenlohner <peb@mp.mpg.de>
* help.h (UPBIBTEXHELP): Add "-kanji-internal".
2011-08-17 Peter Breitenlohner <peb@mp.mpg.de>
* help.h (PBIBTEXHELP, PDVITYPEHELP, PPLTOTFHELP, PTFTOPLHELP):
Add "-sjis-terminal" for WIN32 versions. Uniform appearance.
Add UPBIBTEXHELP, UPDVITYPEHELP, UPPLTOTFHELP, and UPTFTOPLHELP.
* texmfmp-help.h: WIN32 options also for MINGW32.
* configure.ac: New conditional UPWEB for upBibTeX and Co.
2011-08-17 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmp-help.h: Recover help messages for w32tex.
2011-08-15 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmp-help.h: Remove w32tex garbage.
2011-08-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, texmfmem.h, texmfmp.h, texmfmp-help.h,
ac/web2c.ac: Add support for upTeX and e-upTeX.
2011-07-30 Peter Breitenlohner <peb@mppmu.mpg.de>
* mft.ch (parsearguments): Allow find_suffix() to return a
const string.
2011-07-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: No need to test for PDFDoc::getPDFMajorVersion
for poppler >= 0.12.
2011-07-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* enctex.ch: Fix an off-by-one bug initializing mubyte_cswrite.
From Roderich Schupp <roderich.schupp@googlemail.com>,
Debian Bug#633011, tex-k mail Fri, 8 Jul 2011 15:56:23.
2011-07-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* ac/web2c.ac: Always use poppler for XeTeX instead of xpdf.
2011-07-04 Peter Breitenlohner <peb@mppmu.mpg.de>
SyncTeX infrastructure for pTeX and e-pTeX.
* ac/web2c.ac: Enable SyncTeX for pTeX and e-pTeX.
* texmfmp-help.h (*PTEXHELP): Document the -synctex option.
2011-06-23 Karl Berry <karl@tug.org>
* configure.ac (AC_C_CHAR_UNSIGNED): needed for test
in web2c/w2c/config.h, else AIX ends up mis-tangling tex.web.
tlbuild mail from vvv, 21 Jun 2011 23:57:53.
2011-06-06 Karl Berry <karl@tug.org>
* doc/web2c.texi: update MetaPost description, .mem's are
no longer created or used.
2011-05-30 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Use ../am/bin_links.am for $(bindir) links.
2011-05-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac (AC_CONFIG_FILES): Add otps/win32/Makefile.
2011-05-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h: Move generic_synctex_get_current_name() prototype
from synctexdir/synctex-{,e,pdf,xe}tex.h to here.
2011-05-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* osx-strip: Removed.
* configure.ac: Remove osx-strip.
2011-05-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* osx-strip: New shell script to strip Mac OS X binaries.
* configure.ac: Use osx-strip for Mac OS X.
2011-05-05 Karl Berry <karl@tug.org>
* man/pktype.man: output is always to stdout.
* doc/web2c.texi (Common option): -jobname can override recorder name.
2011-04-28 Karl Berry <karl@tug.org>
* doc/web2c.texi (Common options): caveats about the -recorder
.fls file name not following the .log in unusual usage.
Philipp Stephani, 21 Sep 2010 16:28:58, and my reply 28apr11.
2011-04-19 Peter Breitenlohner <peb@mppmu.mpg.de>
Avoid 'differ in signedness' warnings.
* cpascal.h: Define ucharcast().
* bibtex.ch (pds_type): Do not declare as unsigned.
(pre_define): Apply ucharcast() to xord[] index.
* dvicopy.ch (comment): Do not declare as unsigned.
(do_pre): Apply ucharcast() to xord[] index.
* gftodvi.ch (start_gf): Do not declare arg_buffer as unsigned
and apply ucharcast() to xord[] index.
* mf.ch (MF_base_default): Do not declare as unsigned.
(pack_buffered_name): Apply ucharcast() to xord[] index.
(storebasefile, loadbasefile): cast base_engine to string.
* tex.ch (TEX_format_default): Do not declare as unsigned.
(pack_buffered_name): Apply ucharcast() to xord[] index.
(storefmtfile, loadfmtfile): Cast format_engine to string.
2011-03-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: LuaTeX needs poppler at least 0.12, no reason
to test for PDFDoc::getPDF*Version(). HAVE_GETPDFMAJORVERSION
would yield a conflict for pdfTeX using xpdf or poppler 0.10.
2011-04-04 Karl Berry <karl@tug.org>
* doc/ref.txi: add urls for TUGboat.
2011-03-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am: Install symbolic links initex->tex and inimf->mf
or equivalent MinGW wrappers.
* am/bootstrap.am: Use AM_CFLAGS instead of ctangle_CFLAGS.
* am/cweb.am: Use AM_CFLAGS instead of *_CFLAGS.
* am/texmf.am: Use AM_CFLAGS instead of *_CFLAGS.
* libmd5/am/md5.am: Use AM_CFLAGS instead of *_CFLAGS.
2011-02-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.in.orig, configure.in.orig: Remove ancient files.
* Makefile.am (EXTRA_DIST): Adapt.
2011-02-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (install_exe_links, uninstall_exe_links): Hooks to
install and uninstall MinGW wrappers.
2011-02-14 Karl Berry <karl@tug.org>
* texmfmp-help.h: propagate -output-dir wording change to other msgs.
From Akira.
2011-02-08 Karl Berry <karl@tug.org>
* texmfmp-help.h (MFHELP): -output-dir must be an existing dir.
2011-01-17 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (triptrap_diffs): Recipe fragment for trip/trap,
used for $(TRIPTRAP).
* am/texmf.am (trip.diffs, mftrap.diffs): Use $(triptrap_diffs).
2011-01-14 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (clean-local, triptrap-clean): Use TRIPTRAP_CLEAN
and drop double-colon rules.
* am/texmf.am (trip-clean, trap-clean): Use TRIPTRAP_CLEAN.
2011-01-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* triptrap-sh: Add support for e-pTRIP test.
2011-01-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, ac/web2c.ac, texmfmp.h, lib/texmfmp.c:
Add support for e-pTeX.
* texmfmp-help.h: Modernize PTEXHELP and add EPTEXHELP.
Avoid to include TEXHELP for all TeX-like engines.
* texmfmem.h: e-pTeX uses Aleph-type memory words.
2011-01-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* enctex.ch (new): Split enc\TeX off tex.ch (not for pTeX).
* am/texmf.am (tex_ch_srcs): Added enctex.ch.
2011-01-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* lib/texmfmp.c: Removed the initial two #includes;
this file is now #included from texextra.c for TeX,
from mfextra.c for Metafont, ...
* texextra.c (new): #include <texd.h> and <lib/texmfmp.c>.
* mfextra.c (new): #include <mfd.h> and <lib/texmfmp.c>.
* am/texmf.am: {tex,mf}extra.c are now distributed.
2010-12-23 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (bin_links): New variable for required symlinks.
(install-exec-hook, uninstall-hook): Rules for symlinks.
2010-12-14 Karl Berry <karl@tug.org>
* bibtex.web: non-functional update to clarify license,
version of 8-Dec-10.
2010-07-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Get version string from ../../version.ac.
2010-06-13 Karl Berry <karl@tug.org>
* doc/web2c.texi (mpost): mention .mps extension.
2010-06-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* c-auto.h, config.h (removed): Obsolete, all mplibdir/ and
luatexdir/ files are now changed to directly #include
<w2c/c-auto.h> or <w2c/config.h>.
2010-06-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (AM_CPPFLAGS, INCLUDES): Move $(KPATHSEA_INCLUDES).
* am/cweb.am (tie_CPPFLAGS): Add $(AM_CPPFLAGS).
* am/texmf.am (tex_CPPFLAGS, mf_CPPFLAGS): Add $(AM_CPPFLAGS).
(mf_nowin_CPPFLAGS): Use $(mf_CPPFLAGS).
2010-06-10 Peter Breitenlohner <peb@mppmu.mpg.de>
Reorganize web2c headers.
* config.h (deleted): Moved ...
* w2c/config.h (new): ... to here.
* configure.ac: Create w2c/c-auto.h instead of c-auto.h.
* c-auto.h (new): Temporary file including <w2c/c-auto.h>, to be
removed when all luatexdir/ files are changed to directly
include <w2c/c-auto.h>.
* config.h (new): Temporary file including <w2c/config.h>, to be
removed when all mplibdir/ and luatexdir/ files are changed to
directly include <w2c/config.h>.
* Makefile.am (EXTRA_DIST): Adjust.
* cpascal.h: #include <w2c/config.h> instead of "config.h".
2010-06-04 Karl Berry <karl@tug.org>
* configure.ac (web2_version): remove pretest for
TeX Live 2010 (pretest 2, maybe final).
2010-05-31 Karl Berry <karl@tug.org>
* configure.ac (AC_CHECK_FUNCS): remove stat64, since we are not
prepared for largefile support in general, and this gives a false
positive on AIX. tlbuild mail from vvv, 27 May 2010 20:15:40.
* synctex.c [__attribute__]: #define __attribute__ away if it is
not defined. tlbuild mail, 28 May 2010 14:34:53.
2010-05-29 Peter Breitenlohner <peb@mppmu.mpg.de>
* ac/web2c.ac, configure.ac: Use '--with-banner-add' instead of
'--with-tex-banner'.
2010-05-25 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (EXTRA_DIST): Remove metapost.mk.
* am/texmf.am (EXTRA_DIST): Remove tmf-pool.h.
* metapost.mk, tmf-pool.h (removed): Obsolete.
2010-05-24 Karl Berry <karl@tug.org>
* tex.ch (sup_font_mem_size): increase from 4,000,000
to 147,483,647 (the last nine digits of 2^31 - 1). It seems to me
this is merely an integer, so 2^31-1 itself should be safe, i.e.,
a 2 could be prepended, but I just didn't want to go that far.
2010-05-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Fix the lib/libp.a rebuild rule.
2010-05-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (BIBXRETALLOCNOSET, BIBXRETALLOCSTRING): Cast size_t
to long for printing to avoid warnings on 64Bit systems.
* texmfmp.h (undumpcheckedthings, undumpuppercheckthings):
Cast high limit to unsigned long for printing.
2010-05-18 Karl Berry <karl@tug.org>
* configure.ac (web2_version): use /pretest ident.
2010-05-02 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (BIBXRETALLOCSTRING): Need parens around new_size.
From Akira, 02 May 2010 21:49:27.
* bibtex.ch (MAX_GLOB_STRS): Changed from 20 back to 10.
2010-05-02 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* bibtex.ch: increase MAX_GLOB_STRS from 10 to 20, because pbibtex on
windows crashes for some bst. it should be ok without increasing because
of BIBXRETALLOCSTRING etc. don't know why, but MAX_GLOB_STRS = 20
solves the problem.
2010-05-01 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* config.h: remove TEXDLL.
2010-05-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* help.h (PTFTOPLHELP): Document '-charcode-format'.
2010-04-30 Peter Breitenlohner <peb@mppmu.mpg.de>
* dvitype.test: Use installed cm fonts.
2010-04-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Require that 'int' has at least 4 bytes,
allowing to reduce the use of 'integer' in C and C++ code.
2010-04-25 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* texmfmp.h: remove TEXDLL.
* config.h: still there is TEXDLL for safety.
2010-04-23 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (INCLUDES): Remove '-I$(top_builddir)/..' and
'-I$(top_srcdir)/..'.
2010-04-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* pltotf.ch, vptovf.ch: Bug fix, from ptexdir/ppltotf.ch by
Ken Nakano <nakano@nextsolution.co.jp>.
2010-04-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.ch: Fix a small bug (duplicate entry) in bibtex.web.
(add_out_pool): Call buffer_overflow as often as needed.
2010-04-20 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmem.h, texmfmp-help.h: Remove luaTeX specific code.
2010-04-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (sub_dirs): Removed, former ptexdir/lib/ is now
integrated into lib/.
* configure.ac (ptexdir/lib/Makefile.am): Removed.
2010-04-18 Peter Breitenlohner <peb@mppmu.mpg.de>
* help.h (PBIBTEXHELP, PDVITYPEHELP, PPLTOTFHELP, PTFTOPLHELP):
Moved from from ptexdir/ptexhelp.h.
* texmfmp-help.h (PTEXHELP): Moved from ptexdir/ptexextra.in.
* texmfmp.h [PTEX]: Define TEXMFPOOLNAME and TEXMFENGINENAME, and
#include "ptexdir/kanji.h".
2010-04-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Removed LT_LIB_DLLOAD, added check for dlfcn.h.
May require '-ldl' for dlopen() for luaTeX only (not everyone).
2010-04-14 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (sub_dirs): New variable, such that ptexdir/lib/
for the pTeX programs is (re-)built early.
2010-04-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* triptrap-sh [pTeX]: Generate ptrip.diffs.
2010-04-11 Karl Berry <karl@tug.org>
* ac/web2c.ac (kpse_tex_progs): add ptex.
* configure.ac (KPSE_PTEXENC_FLAGS): invoke new macro.
(AC_CONFIG_FILES): generate ptexdir/lib/Makefile
* Makefile.am: include $(srcdir)/ptexdir/am/ptex.am.
* lib/texmfmp.c [pTeX]: various pTeX conditionals.
* texmfmp-help.h [pTeX]: pTeX options.
2010-04-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* tangle.ch: Check and correct module numbers.
* dvitype.ch, gftodvi.ch, gftopk.ch, gftype.ch, mf.ch, mft.ch,
pktogf.ch, pktype.ch, pltotf.ch, pooltype.ch, tangle.ch, tex.ch,
tftopl.ch, vftovp.ch, vptovf.ch, weave.ch: Remove trailing
whitespace.
2010-04-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/cweb.am (cweave.c): Add dependency on cwebdir/prod.w.
2010-04-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* dvicopy.ch (dvi_name): New global variable.
(dvi_length, dvi_move): Use dvi_name instead of 'dvicopy' as
last arg of xfseek() and xftell().
No random reading on stdin, may be not seekable.
* dvitype.ch (dvi_name): New global variable.
(dvi_length, move_to_byte): Use dvi_name instead of 'dvitype'
as last arg of xfseek() and xftell().
* gftopk.ch (gf_length, move_to_byte): Use gf_name instead of
'gftopk' as last arg of xfseek() and xftell().
2010-04-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* pktogf.ch: Check and correct module numbers.
Dynamically allocate and resize the row_counts array.
2010-04-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* gftopk.ch: Check and correct module numbers.
Dynamically allocate and resize the row array.
Remove superfluous variable vpl_name.
Bug fix for GF file too short.
2010-04-05 Taco Hoekwater <taco@luatex.org>
* texmfmp.h: Removed #ifdef luaTeX code, now that luatex
no longer includes this file at all.
2010-04-04 Taco Hoekwater <taco@luatex.org>
* configure.ac: Append LT_LIB_DLLOAD to the end,
needed for the current 0.60.0 luatex build system.
* Makefile.am: Comment out the luatexdir/am/luatangle.am line
* autoreconf
2010-03-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Check if dlopen() requires `-ldl'.
2010-03-23 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (BIBXRETALLOCSTRING): New macro to resize BibTeX's
global_strs array of strings.
* mf.ch, tex.ch: Remove extra semicolon after setup_bound_var.
* bibtex.ch: Parameters |ent_str_size| and |glob_str_size|
settable at runtime. Arrays with dimension |max_glob_strs| or
|lit_stk_size| allocated at runtime and resized as needed.
Dynamically allocate |singl_function| instances and resize them
as needed; remove procedure |singl_fn_overflow|.
2010-03-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.ch (str_room): Call pool_overflow() as often as needed.
(scan_fn_def): Increase wiz_fn_space as often as needed.
(x_text_prefix): Add missing str_room.
2010-03-17 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.ch (max_cites): Dynamically resize the cite_list,
type_list, entry_exists, and cite_info arrays.
* tests/bibtex-mem.test: New shell script for dynamic arrays.
* tests/memdata[123].bst: Test data from Philipp Lehman.
* am/web.am: Adapted.
2010-03-16 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.ch (entry_ints, entry_strs): Delay allocation until
the required size is known.
(max_ent_ints, max_ent_strs): Removed.
2010-03-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/bootstrap.am: Use suffix rules to create tangleboot.p,
ctangleboot.c, and cwebboot.[ch] from distributed `in' files.
* bibtex.ch: Check and correct module numbers. Parameter
|max_strings| settable at runtime, |hash_size| and |hash_prime|
are determined from |max_strings|. Affected arrays are
allocated at runtime, but can't be resized.
2010-03-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (kpsesetprogname): Removed.
* bibtex.ch, dvicopy.ch, dvitype.ch, gftodvi.ch, gftopk.ch,
patgen.ch, pktogf.ch, pktype.ch, pltotf.ch, pooltype.ch,
tangle.ch, tftopl.ch, vftovp.ch, vptovf.ch, weave.ch:
Use kpse_set_program_name(argv[0], nil) instead of
kpse_set_progname(argv[0]).
* gftype.ch: Use kpse_set_program_name(argv[0], 'gftype')
instead of kpse_set_progname(argv[0]).
* triptrap/texmf.cnf: Add '.inimf' to Metafont specific, and
'.gftype' to GFtype specific parameters.
2010-03-09 Karl Berry <karl@tug.org>
* bibtex.web: final 0.99d, from Oren.
2010-03-09 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (BIBXRETALLOCNOSET): New macro to resize BibTeX
arrays but not increasing the size parameter.
* bibtex.ch: Use BIB_XRETALLOC_NOSET when resizing several
arrays with the same size, to obtain accurate log entries.
(add_out_pool): Dynamic output buffer, don't call overflow().
(file_nm_size_overflow, add_area): Remove unused procedures.
2010-03-08 Karl Berry <karl@tug.org>
* tests/bibtex-openout-test.pl: allow running standalone.
* tests/bibtex-longline-test.pl: new test.
* am/web.am (web_tests): add it.
2010-03-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* mf.ch (end_name, print_file_name): Make quoting of file names
more robust. Increase sup_buf_size.
Diffs from Akira, 04 Mar 2010 21:47:33.
Slightly reorganize and cast repeated code into Web macros.
2010-03-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (xcallocarray): Added.
* texmfmp.h (setupboundvariable): Moved to lib/lib.h from here.
* gftype.ch: Dynamically allocated pixel image array.
Parameters settable at runtime; move the previous increased
value (line_length=500) into texmf.cnf.
* triptrap/texmf.cnf: GFtype parameters for trap test.
* triptrap/mftrap.diffs: Updated.
2010-03-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (triptrap): New target to run TRIP and TRAP tests
and create diff files.
(TRIPTRAP): New make var to collect diffs files to build.
* triptrap-sh (new): Shell script.
* am/texmf.am (TRIPTRAP): Add trip.diffs and mftrap.diffs.
2010-03-03 Peter Breitenlohner <peb@mppmu.mpg.de>
* mf.ch: Make screen size settable at runtime; move the previous
increased values (768x1024 => 1664x1200) into texmf.cnf.
* triptrap/texmf.cnf: Use screen size 100x200 for trap test as
recommended in trapman.tex.
2010-03-02 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/web.am: New bibtex test data.
2010-03-01 Karl Berry <karl@tug.org>
* bibtex.web: 0.99d test 1 from Oren, breaking .bbl lines only at
whitespace.
* bibtex.ch: remove no-longer-needed workaround for \% break.
* tests/longline.aux,
* tests/longline.bib,
* tests/longline.tex: new test files.
(Still working on their incorporation into make check.)
2010-02-22 Karl Berry <karl@tug.org>
* configure.ac: (web2_version): move to 2010/dev.
2010-02-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am (mf_x_libs): Use libgdi32 for WIN32.
2010-02-18 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (makesuffix, removesuffix): Remove these from the
underscore list.
* am/texmf.am (EXTRA_DIST): Remove tests/common-test.pl.
2010-02-18 Karl Berry <karl@tug.org>
* tests/common-test.pl: moved to texk/tests.
* tests/write18-quote-test.pl,
* tests/bibtex-openout-test.pl: change calls.
2010-02-01 Karl Berry <karl@tug.org>
* doc/web2c.texi (Output file location): mention that TEXMFOUTPUT
is also used for input.
2010-01-31 Peter Breitenlohner <peb@mppmu.mpg.de>
Moved luatexdir/zziplib/ to ../../libs/zziplib.
* configure.ac: Add KPSE_ZZIPLIB_FLAGS.
* Makefile.am: Add ZZIPLIB_RULE, remove luatexdir/am/libzzip.am.
2010-01-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h (mk_shellcmdlist): Declare string param as const.
2010-01-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* dvitype.ch (open_dvi_file): Skip use of cur_name.
(parse_arguments): Rearrange out_mode to avoid compiler warning.
* mft.ch (change_name, tex_name), pltotf.ch (tfm_name, pl_name),
pooltype.ch (pool_name), tftopl.ch (tfm_name, pl_name),
tangle.ch (web_name, chg_name, pascal_name, pool_name),
vftovp.ch (vf_name, vpl_name), vptovf.ch (vpl_name, tfm_name,
vf_name), weave.ch (web_name, chg_name, tex_name): Declare as
const_c_string.
2009-12-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/web.am (EXTRA_DIST, TESTS, bibtex_tests, web_tests):
Reorganize to run tests only when building the programs (if WEB).
2010-01-04 Karl Berry <karl@tug.org>
* am/texmf.am (tex_tests): add tests/write18-quote-test.pl.
* tests/write18-quote-test.pl,
* tests/write18-quote.tex: new files to do a bit of \write18 testing.
2010-01-02 Karl Berry <karl@tug.org>
* tex.ch (\write18): say "executed safely" instead of just
"executed", since the command may have been quoted before it was
actually executed.
2009-12-25 Karl Berry <karl@tug.org>
* Makefile.am (EXTRA_DIST): eliminate it.
* fmtutil.in: rm obsolete (now Build/source/texk/tetex/fmtutil.cnf).
* tests/bibtex-openout-test.pl: new file.
* am/web.am (bibtex_tests): new var.
(TESTS): add $(bibtex_tests).
(EXTRA_DIST): likewise.
2009-12-24 Karl Berry <karl@tug.org>
* AUTHORS, Makefile.in, README, help.h: doc/email updates.
2009-12-23 Karl Berry <karl@tug.org>
* help.h (BIBTEXHELP): tweaks.
2009-12-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Add checks for mkdtemp(), snprintf(), and
stat64().
2009-12-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Add checks for <locale.h>, fmax(), setlocale(),
strlcat(), and strlcpy() for synctex.
2009-12-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Add check for <sys/time.h>, erroneously omitted
in transition to TL2009 build system.
2009-12-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Add checks for gettimeofday() and ftime(),
erroneously omitted in transition to TL2009 build system.
2009-11-27 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch (read_font_info): Better wording of error message.
2009-11-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch (read_font_info): Check font name length to avoid
broken .dvi files.
2009-11-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.ch: Replace kpse_out_name_ok by kpse_in_name_ok for
input files. From Akira Kakuto <kakuto@fuk.kindai.ac.jp>.
2009-11-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* doc/web2c.texi (tex invocation): Shorten the paragraph about
security holes due to writing arbitrary files, add reference
to kpathsea_{in,out}_name_ok in kpathsea.info, remove reference
to openoutnameok from lib/texmfmp.c.
(Common options): Replace reference to Omega by Aleph.
(TeX extensions): Remove Omega, add XeTeX. FIXME: Home page.
(Online Metafont graphics): Adjust configure options.
2009-10-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h: Add kpse_{in,out}_name_ok().
* bibtex.ch: Check for legitimate output file names.
From Akira Kakuto <kakuto@fuk.kindai.ac.jp>.
Also check for legitimate input file names.
* mf.ch, tex.ch: Use kpse_{in,out}_name_ok(), now in Kpathsea,
instead of open_{in,out}_name_ok().
* texmfmp.h: Remove open{in,out}nameok.
2009-10-17 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Add a test for xpdf/poppler features.
2009-10-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (roundunscaled, roundfraction): Put parentheses
around macro parameter.
* mf-binpool.ch (get_strings_started): Drop unused variables.
* mf.ch (MF_base_default): Declare as w2c_u_string.
(jump_out, fatal_error, overflow, confusion): Declare noreturn.
(bound_name, months): Declare as const_cstring.
(start_input): Drop unused variables.
* bibtex.ch (str_lookup): Avoid 'uninitialized' warning.
2009-10-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am: Enable compiler warnings for TeX and MF.
* tex-binpool.ch (get_strings_started): Drop unused variables.
* tex.ch (TEX_format_default): Declare as w2c_u_string.
(jump_out, fatal_error, overflow, confusion): Declare noreturn.
(do_extension): Drop unused variables.
2009-09-26 Karl Berry <karl@tug.org>
* configure.ac (AC_C_BIGENDIAN): need this test for
sharable formats.
2009-09-25 Peter Breitenlohner <peb@mppmu.mpg.de>
* help.h (OVP2OVFHELP): Default OFMFILE is "basename of".
* help.h (VPTOVFHELP): Default TFMFILE is "basename of".
2009-09-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* vftovp.ch: Somewhat reorganize, avoiding to move a largish
section of code (affected by a bugfix).
Fix a bug in vftovp.web to diagnose characters in VF packets
outside the allowed range 0..255.
2009-09-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* vftovp.ch: Remove extra newline from BAD VF/TFM comment.
2009-09-09 Peter Breitenlohner <peb@mppmu.mpg.de>
* pltotf.ch, vptovf.ch: Reduce max_param_words to 254.
Although the TFM format supports up to 0x7fff, the PL format
supports at most 255. Staying below avoids compiler warnings.
2009-09-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* dvicopy.web: Version 1.6 (September 2009).
Minor cleanup to avoid unused or uninitialized variables
and diagnose impossible cases.
* dvicopy.ch (make_name): Eliminate unused variable.
(jump_out, confusion, overflow, bad_tfm, bad_font, bad_dvi):
Declare as noreturn procedures. Remove trailing blanks.
* patgen.web: Version 2.4 (September 2009).
Minor cleanup to avoid uninitialized variables.
* patgen.ch: Remove trailing blanks.
* dvitype.ch (first_par): Diagnose impossible cases.
* gftype.ch (first_par): Diagnose impossible cases.
* gftodvi.ch (interpret_xxx, skip_nop): Diagnose impossible cases.
2009-09-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am: Adapt to new makecpool with one argument,
obsoleting tmf-pool.h.
2009-09-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h (dump_name, c_job_name, last_source_name,
last_lineno): Declare extern for luaTeX.
2009-09-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h (w2custring, const_w2custring): Add new types of
strings of unsigned chars used as array indices.
* gftodvi.ch (gf_start): Declare arg_buffer as w2c_u_string.
* dvicopy.ch: Declare comment as const_w2c_u_string.
* bibtex.ch: Eliminate the unused |exit_program| label.
(pds_type): Declare as const_w2c_u_string.
2009-09-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h (maininit, normalize_quotes): Add prototypes.
(do_dump, do_undump): Add prototypes also for luaTeX.
2009-09-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* config.h (WEB2C_NORETURN): Define as attribute (gcc only).
(uexit): Declare as WEB2C_NORETURN.
2009-09-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Enable compiler warnings for non-engine Web2C.
* tangle.ch: Eliminate the unused |end_of_TANGLE| label.
* patgen.ch: Eliminate the unused |end_of_PATGEN| label.
* gftopk.ch, gftype.ch, pktogf.ch, pktype.ch, pltotf.ch,
vptovf.ch: Define char (used as array index) as 0..255.
* vftovp.ch (ASCII04 etc.): Declare as const_c_string.
(vf_input, organize, do_map): Eliminate unused labels.
* tftopl.ch (ASCII04 etc.): Declare as const_c_string.
* mft.ch (style_name): Declare as const_c_string.
* weave.ch (translate): Drop var 'k' unless debugging.
2009-09-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am: Prepare compiler warnings for TeX and MF.
2009-09-04 Karl Berry <karl@tug.org>
* gftype.ch (line_length, max_row, max_col): increase to 500.
2009-09-02 Peter Breitenlohner <peb@mppmu.mpg.de>
* libmd5/am/md5.am: Enable compiler warnings.
2009-08-29 Peter Breitenlohner <peb@mppmu.mpg.de>
* ctangleboot-sh: New shell script to run ctangleboot and if
required update ctangleboot.cin from ctangle.c (and similar).
* configure.ac: Create ctangleboot-sh.
* cwebboot.hin: New header file with prototypes for functions
from cwebdir/common.w, cwebdir/ctangle.w and cwebdir/weave.w.
* am/bootstrap.am, am/cweb.am: Adapt to these new files.
2009-08-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (default_dependencies): Some programs must depend
explicitly on KPATHSEA_DEPEND, the implicit dependency via proglib
is not enough.
* am/bootstrap.am (tangleboot_DEPENDENCIES,
ctangleboot_DEPENDENCIES): Use default_dependencies.
2009-08-18 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h, am/texmf.am: Integrate SyncTeX into texmfmp.h.
2009-08-17 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.c (shell_cmd_is_allowed): Change arg1 from 'char **'
to 'const char *'.
(runsystem): Change arg from 'char *' to 'const char *'.
2009-08-16 Peter Breitenlohner <peb@mppmu.mpg.de>
Better handling of tools that produce many outputs
(compare Automake manual 27.9: Multiple Outputs).
* tangle-sh: New shell script to handle Tangle & Co.
* web2c-sh: New shell script to handle Web2C conversion.
* configure.ac: Create tangle-sh and web2c-sh.
* Makefile.am (texmf_tangle, o_tangle): Use tangle-sh.
(web2c): Use web2c-sh.
* am/bootstrap.am, am/web.am: Adapt to web2c-sh.
* am/texmf.am: Adapt to tangle-sh and web2c-sh.
2009-08-15 Peter Breitenlohner <peb@mppmu.mpg.de>
Reorganize bootstrapping rules for tangle and ctangle, to
avoid circular dependencies.
tangleboot.p (removed): Renamed ...
tangleboot.pin (new): ... to this.
ctangleboot.c, cwebboot.c (removed): Renamed ...
ctangleboot.cin, cwebboot.cin (new): ... to these.
am/bootstrap.am: Adapted.
2009-08-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* am/texmf.am (tex_c_h, mf_c_h): avoid to split the C code.
2009-08-12 Karl Berry <karl@tug.org>
* tex.ch (1.11): doc fix.
* bibtex.ch (xsubstring): forgot to check for pool_overflow.
See test case and bug report at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=520920.
Vincent Danen mail to tex-live, 4 Aug 2009 14:42:29.
2009-07-14 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (check_PROGRAMS): pltotf and tftopl are required
by both omegafonts/omfonts.test and omegaware/omfonts.test.
2009-07-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h: recover definition of kpsesrccmdline.
2009-06-30 Karl Berry <karl@tug.org>
* config.h: #include <c-auto.h>, not <web2c/c-auto.h>.
-I.. is evidently not included somewhere along the line?
2009-06-23 Peter Breitenlohner <peb@mppmu.mpg.de>
* config.h: #include <stdarg.h>, not <kpathsea/c-vararg.h>.
* config.h, cpascal.h, texmfmp.h: drop P?C, P?H, use ANSI C
function declarations.
2009-06-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: when Metafont is not built, use
'--without-mf-x-toolkit' and '--without-x' as default.
2009-06-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* cpascal.h: #include "lib/lib.h" and move declarations for
lib/*.c to that new file.
2009-06-04 Karl Berry <karl@tug.org>
* tex.ch: do not announce file_line_error or parse_first_line
on terminal, log file is good enough.
* alephdir/comsrcspec.ch: no need for Alephk.
* luatexdir/luatex.ch: no need for LuaTeXk.
* pdftexdir/pdftex.ch: no need for pdfTeXk.
* xetexdir/xetex.ch: no need for XeTeXk.
2009-06-03 Karl Berry <karl@tug.org>
* configure.ac (with_tex_banner): use echo|grep for check
instead of test -z ..., since we don't want to risk nested "quotes".
2009-06-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* Update version number to 2009.
* configure.ac, ac/web2c.ac (--with-tex-banner):
allow to specify the string appended to banner lines instead of
the current default 'Web2C 2009'.
This string must contain the current Web2C version number.
2009-05-29 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac, ac/web2c.ac (enable_omfonts): allow to choose
between Web2C versions of ofm2opl&Co and symlinks to omfonts.
2009-05-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* help.h (DVITOMPHELP): remove help for obsolete Web2C version.
* help.h (LUATANGLEHELP): sort in alphabetically.
* texmfmp-help.h (MPHELP): remove help for obsolete Web2C version.
2009-05-27 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac, ac/web2c.ac (enable_ipc): default is enabled.
2009-05-25 Peter Breitenlohner <peb@mppmu.mpg.de>
* mp.ch, mp.web, mpdir/, mpware/: removed (old MetaPost).
* Makefile.am, configure.ac: removed old MetaPost and mpware.
* dvitomp.ch, dvitomp.test, dvitomp.web: removed.
* am/web.am: removed dvitomp.
2009-05-23 Karl Berry <karl@tug.org>
* tex.ch (pool_size): increase default to 200000, so pdftex -ini
can start up without texmf.cnf. From Thanh.
2009-05-19 Karl Berry <karl@tug.org>
* tex.ch (max_font_max): increase to 9000.
(hash_size): increase to 15000.
(Their sum is supposed to stay <29000.)
2009-05-18 Karl Berry <karl@tug.org>
* cpascal.h (getline): #define to web2c_getline,
to try to avoid conflict with a newly broken POSIX and glibc.
Report from Gabriele Balducci via Taco, tlbuild mail
17 May 2009 17:56:54.
2009-05-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* vftovp.ch: Send print_real to stderr.
2009-05-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* trap.test (new): Shell script for TRAP tests.
2009-05-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* trip.test (new): Shell script for TRIP test.
2009-05-11 Peter Breitenlohner <peb@mppmu.mpg.de>
* bibtex.test, ... (new): Shell scripts for 'make check' tests.
2009-05-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* ac/web2c.ac, configure.ac: Remove --enable-fmtutil option.
2009-05-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp.h: remove references to pdfeTeX.
* texmfmp.h (mk_shellcmdlist, init_shell_escape,
shell_cmd_is_allowed, runsystem): declare for luaTeX.
2009-04-17 Karl Berry <karl@tug.org>
* texmfmp.h (runsystem): declare.
2009-03-29 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, configure.ac: remove Omega.
* tex.ch, texmfmem.h, texmfmp-help.h, texmfmp.h: remove all
references to Omega, eOmega, and pdfeTeX.
2009-03-28 Karl Berry <karl@tug.org>
* texmfmp.h: shell escape declarations.
2009-03-27 Taco Hoekwater <taco@luatex.org>
* configure.ac: With the new luatex, what used to be
luatexdir/luafontforge/ is now luatexdir/luafontloader/.
2009-03-20 Peter Breitenlohner <peb@mppmu.mpg.de>
Adapt to TL2009 build system.
2009-03-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* texmfmp-help.h [eTeX,TeX]: Document -synctex switch.
2009-03-02 Karl Berry <karl@tug.org>
* texmfmp-help.h (PDFTEXHELP): --no-mktex can now apply to pk
files too.
2009-02-26 Karl Berry <karl@tug.org>
* texmfmp-help.h: mention --shell-restricted.
* tex.ch (c_int_type, shell_enabled_p, address_of): remove _'s
to reduce differences with luatex.
(restrictedshell): new global.
(system): replace with runsystem, for restricted mode.
2009-01-26 Karl Berry <karl@tug.org>
* configure.in (with_cxx_runtime_hack): use
#include <iostream>
using namespace std;
for the hello,world test, to placate the backward-incompatible
standard.
2008-11-18 Karl Berry <karl@tug.org>
* Makefile.in (install-data): mkinstalldirs man1dir man5dir.
Report from Angelo Graziosi, tlbuild 17 Nov 2008 01:03:51.
2008-08-13 Karl Berry <karl@tug.org>
* Makefile.in (install-data): Also install synctex.[15].
Report from Adam Maxwell on mactex.
2008-07-08 Karl Berry <karl@tug.org>
* configure.in (WEB2CVERSION): 7.5.7.
2008-07-01 Karl Berry <karl@tug.org>
* texmfmp-help.h [MP] (MPHELP): mpost is usually named mpost,
not mp.
2008-06-25 Peter Breitenlohner <peb@mppmu.mpg.de>
* help.h (CTANGLEHELP): Correct syntax for ctangle usage.
* (CWEAVEHELP): Correct syntax for cweave usage.
2008-06-12 Karl Berry <karl@tug.org>
* luatexdir/tex/texnodes.c: avoid identifier `prealloc', (wrongly)
defined in HP-UX <unistd.h>.
2008-06-03 Karl Berry <karl@tug.org>
* tex.ch (sup_param_size): increase to 32767.
ntg-pdftex mail from martin, 2 Jun 2008 14:15:42.
2008-06-01 Karl Berry <karl@tug.org>
* luatexdir/luatex.mk (install-exec): install texlua symlink.
2008-05-31 Karl Berry <karl@tug.org>
* Makefile.in (install-programs): stupidly forgot to install
$(basic_engines).
2008-05-28 Karl Berry <karl@tug.org>
* Makefile.in (basic_engines): split off tex/mf[n]/mpost.
(install-programs): handle basic_engines here.
(install-tex, install-mf, install-mpost; -exec, -data, -dumps):
remove all these. Never try to make the dumps.
* luatexdir/luatex.mk,
* omegadir/omega.mk,
* xetexdir/xetex.mk,
* alephdir/aleph.mk,
* pdftexdir/pdftex.mk,
* etex/etex.mk: omit installation of pool files and dumps,
with consequent simplifications. For etex.mk, also omit
installation of the binary.
2008-05-25 Karl Berry <karl@tug.org>
* cpascal.h (loadpoolstrings): declare.
2008-05-23 Karl Berry <karl@tug.org>
* configure.in (fmtutil.cnf): no longer generate from fmtutil.in.
* Makefile.in (install, distclean): remove lines about fmtutil.cnf.
* fmtutil.in: note that this file is no longer used, the real
fmtutil.cnf is now generated at install time.
2008-05-20 Karl Berry <karl@tug.org>
(Found by peb.)
* luatexdir/luatangle.web: OTANGLE -> LUATANGLE.
* luatexdir/Makefile.in (check): PETEX -> LTEX.
* web2c/makecpool.c: update from luatex repo; cosmetic changes only.
2008-04-29 Karl Berry <karl@tug.org>
* doc/Makefile.in (install-data): do not cd $(srcdir) in any rule,
that fails when the install program is specified by a relative path.
2008-04-28 Karl Berry <karl@tug.org>
* fmtutil.in: disable cont-en, texexec et al. create it.
2008-04-18 Karl Berry <karl@tug.org>
* Makefile.in (tie): no need for $(native).
2008-04-16 Karl Berry <karl@tug.org>
* Makefile.in,
* web2c/makecpool.c,
* ...: use the one makecpool provided by Taco for all programs.
2008-04-11 Karl Berry <karl@tug.org>
* xetexdir/xetex.h (Byte): #define to my_Byte and then #undef to avoid typedef
conflict between TECkit_Common.h and zlib; sigh.
2008-03-30 Karl Berry <karl@tug.org>
* Makefile.in (web2c): pass . for native tooldir argument.
* web2c/convert: accept tooldir argument a la luatex.
* web2c/texmf.defines (loadpoolstrings): define here.
* web2c/loadpool.defines: remove.
* luatexdir/luatex.defines,
* mpdir/mp.defines,
* omegadir/omega.defines,
* alephdir/aleph.defines (loadpoolstrings): rm.
2008-03-25 Karl Berry <karl@tug.org>
* Makefile.in,
* tmf-pool.h,
* mf-binpool.ch,
* tex-mkcpool.c,
* mf-mkcpool.c,
* etexdir/etex.mk,
* etexdir/etex-binpool.ch,
* tex-binpool.ch,
* web2c/convert,
* web2c/loadpool.defines: integrate pool file in binary for
tex, mf, and etex. From Akira.
* tftopl.web: revised version 3.2 from Knuth.
2008-03-24 Karl Berry <karl@tug.org>
* tex.ch: use print_c_string to print the new prompt_file_name
help message, so it ends up in the log.
* cpascal.h (printcstring): #define it.
2008-03-23 Karl Berry <karl@tug.org>
* tex.web,
* tex.ch: update for Knuth version 3.1415926.
* tex.ch (prompt_file_name): output prompt_file_name_help_msg
instead of a string pool string.
* cpascal.h: define it (conditionally for Windows).
2008-03-22 Karl Berry <karl@tug.org>
* tftopl.web: initial tftopl.web update from knuth
2008-03-02 Karl Berry <karl@tug.org>
* Makefile.in (engines): include mpost literally. Bug report from
Alexis Ballier, 29 Feb 2008 19:27:23, via
https://bugs.gentoo.org/show_bug.cgi?id=201187.
(default all): remove dumps, it's just troublemaking these days?
2008-02-29 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.in: replace PACKAGE_... by WEB2C_PACKAGE_... in
c-auto.h, to avoid conflicts with other packages.
* configure.in: use AH_TOP, AH_BOTTOM, and AC_DEFINE's third
argument to provide autoheader templates ...
* withenable.ac: use AC_DEFINE's third argument to provide
autoheader templates ...
* acconfig.h: ... removed.
2008-02-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.in: remove AC_DECL_YYTEXT to avoid autoconf warning.
2008-02-14 Karl Berry <karl@tug.org>
* tex.ch (max_font_max): increase to 5000.
Taco mail to tex-live, 13 Feb 2008 10:00:35.
* tex.ch (make_name_string): further change from
Jonathan, tex-implementors 12 Feb 2008 14:33:56.
2008-02-11 Karl Berry <karl@tug.org>
* tex.ch (make_name_string): avoid clobbering globals via
This is TeX ...
**abc%
*de
From Akira and Jonathan Kew, tex-implementors 02 Feb 2008 20:42:18
et al.
2008-01-29 Peter Breitenlohner <peb@mppmu.mpg.de>
Convert from autoconf-2.13 to autoconf-2.59+:
* Makefile.in, doc/Makefile.in, mpdir/Makefile.in:
Add @configure_input@ lines.
* aclocal.m4 (new): Generated (aclocal -I ../m4).
* configure: Regenerated (autoconf).
2008-01-18 Karl Berry <karl@tug.org>
* cpascal.h (recorder_record_input, recorder_record_output): need
const_string as arg to avoid warnings compiling *extra.c.
* texmfmp.c (user_progname): make const_string a la dump_name,
since we assign them.
2008-01-02 Jonathan Kew <jonathan_kew@sil.org>
* tex.ch (expand_depth, et al.): when calling expand, don't
recurse enough to clobber the os stack. Default value 10000.
2007-12-24 Karl Berry <karl@tug.org>
* doc/web2c.texi (gftodvi invocation): talk a bit more about slant
fonts, pursuant to DEK's message to tex-k of 10 Jul 2005 18:38:11.
2007-12-19 Martin Schr er <martin@oneiros.de>
* tex.ch (ssup_max_strings): increase to 2097151
(sup_main_memory): increase to 256000000
2007-12-19 Karl Berry <karl@tug.org>
* tangle.ch (max_bytes): increase to 65535.
* config.h (LONGINTEGER_TYPE): switch to off_t.
(Both of these from Martin S.)
2007-10-23 Karl Berry <karl@tug.org>
* config.h (LONGINTEGER_TYPE): #define, depending on the C version.
(longinteger): typedef.
2007-10-01 Karl Berry <karl@tug.org>
* cpascal.h (floor): #undef, since MaxOSX #defines it.
From Peter Dyballa, metapost list, 27 Sep 2007 15:25:03.
2007-09-18 Karl Berry <karl@tug.org>
* tex.ch (29.530): Wording of "Type <return>" msg.
2007-09-16 Karl Berry <karl@tug.org>
* c-auto.in (EDITOR): doc fix.
2007-09-12 Karl Berry <karl@tug.org>
* c-auto.in (EDITOR) [WIN32]: need "", and emacs preferred.
From Akira.
2007-09-09 Karl Berry <karl@tug.org>
* c-auto.in (EDITOR): 'quote' the filename.
Reported by Frank K, 17 Jul 2007 17:00:41, debian bug 433455.
2007-08-24 Karl Berry <karl@tug.org>
* doc/web2c.texi (Initial MetaPost): change pragma link.
2007-07-15 Karl Berry <karl@tug.org>
* tex.ch,
* alephdir/com16bit-rc2.ch,
* omegadir/com16bit.ch: fixes from Akira so "tex %" followed
by RET is stable. Also sync aleph/omega constants with tex.
Mail of 14 Jul 2007 09:35:02.
2007-03-30 Karl Berry <karl@tug.org>
* tex.ch (sup_buf_size): increase to 30,000,000 per Hans mail to
tex-live, 30 Mar 2007 16:52:09.
2007-01-10 Karl Berry <karl@tug.org>
* Makefile.in (programs): include $(pdftosrc), which has always
been built, but missing from the install.
2007-01-01 Karl Berry <karl@tug.org>
* config.h (inline) [__cplusplus]: #undef inline under C++, since
inline is a keyword. It should never be #define'd, but
c-auto.in->h can do so. Found by vvv on AIX.
2006-12-30 Karl Berry <karl@tug.org>
* configure.in: bump version to 7.5.6.
2006-12-27 Karl Berry <karl@tug.org>
* fmtutil.in: the binary name is pdftex now.
2006-12-10 Karl Berry <karl@tug.org>
* omegaware/odvicopy.ch (int_8): rename the type to int_8_odvicopy,
and @d int_8 itself to that, so that we don't end up with int8 in
the C file. AIX inttypes.h declares that. (Reported by vvv.)
2006-09-05 Karl Berry <karl@tug.org>
* bibtex.ch (BUF_SIZE): increase to 20000 per Lee Samuel Finn, via
3 Sep 2006 10:32:53 +0200 mail from Gerben.
2006-07-10 Karl Berry <karl@tug.org>
* tex.ch (sup_font_mem_size): double again, to 4000000.
(actually, it seems we could set all the sup_* to the absolute
maximums from TeX's architecture, since texmf.cnf determines what
is allocated. A patch for that would be welcome. :)
2006-06-20 Jonathan Kew <jonathan_kew@sil.org>
* texmfmem.h, texmfmp.h, texmfmp-help.h, lib/texmfmp.c: Added
conditional fragments needed for building XeTeX.
2005-09-02 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [53.1370]: Since we generate a string in all cases, we
need to erase it in all cases. Reported by Han The Thanh
<hanthethanh@gmail.com>, diagnosed by Akira Kakuto
<kakuto@fsci.fuk.kindai.ac.jp>.
2005-08-22 Olaf Weber <olaf@infovore.xs4all.nl>
* bibtex.ch: Make the buffer and related arrays grow dynamically.
Fixes a bug reported by Kevin Cahill <cahill@unm.edu>.
2005-08-13 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: An \immediate\write18 on the '**' prompt would crash
TeX, because the log file isn't open yet. Reported by Jerzy
B. Ludwichowski <Jerzy.Ludwichowski@uni.torun.pl>. Since we
always log something for \write18, so lets also log the command
when \write18 is disabled, instead of merely showing that
something was attempted.
2005-08-03 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Fix missing double-quote.
* texmfmp-help.h [Aleph,eTeX,pdfeTeX]: Document -etex switch.
* doc/web2c.texi: Correct missing entries in a table.
2005-07-27 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: libkpathsea is entirely in LGPL.
* vftovp.ch: Remove misplaced semicolon.
* texmfmp.h: Disable IPC when compiling with __DJGPP__. (Should
really be done in configure script.)
* texmfmp.h: Remove references to pdfxtex. Add
get_seconds_and_micros prototype.
2005-07-25 Olaf Weber <olaf@infovore.xs4all.nl>
* weave.ch: Increase max_bytes to 65530. We're bumping to the
16-bit limits here.
* tex.ch: Significantly increase the ssup_trie_size.
* metapost.mk: Fix build rules/dependencies for mpware.
* Makefile.in: Fix build rules for mpware.
* vftovp.ch: Report the name of tfm files that we cannot find or
find to be unusable. Reported by Patrick Gundlach.
2005-06-29 Olaf Weber <olaf@infovore.xs4all.nl>
* withenable.ac: Remove one pair of brackets from
--with-editor-CMD help text.
2005-06-26 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/Makefile.in: Replace ac_include with kpse_include. From
Peter Breitenlohner.
* withenable.ac: Fully quote arguments of AC_AG_WITH. From Peter
Breitenlohner.
* configure.in: Syntax changes to match autoconf2.5x. From Peter
Breitenlohner. To version 7.5.5.
* Makefile.in: Change ac_include to kpse_include. From Peter
Breitenlohner.
2005-06-22 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.web: Update for MetaPost 0.901.
* mp.ch: Update for MetaPost 0.901.
* cpascal.h: Add xreallocarray(). Requested by Hartmut Henkel
<hartmut_henkel@gmx.de>.
2005-06-21 Olaf Weber <olaf@infovore.xs4all.nl>
* metapost.mk, dvitomp.mk, Makefile.in: Break out the metapost and
dvitomp related makefile rules into separate makefile fragments.
* doc/web2c.texi: Update description of newer.
2005-04-12 Olaf Weber <olaf@infovore.xs4all.nl>
* mf.ch [38.788]: Use |get_job_name| so the --jobname switch can
be used to replace "mfput".
[38.793]: Interface of |get_job_name| changed.
* mp.ch [35.765]: Use |get_job_name| so the --jobname switch can
be used to replace "mpout".
[35.770]: Interface of |get_job_name| changed.
* tex.ch [29.534]: Use |get_job_name| so the --jobname switch can
be used to replace "texput".
[29.537]: Interface to |get_job_name| changed.
This is part of a group of changes that fixes pdftex bug 302.
http://sarovar.org/tracker/?func=detail&atid=493&aid=302&group_id=106
2005-02-06 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (aleph-dist): Remove generated file, make sure
aleph.version file exists.
2005-02-05 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (uninstall, uninstall-exec, uninstall-data): Dummy
target added so make uninstall doesn't stop here.
2005-01-21 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/Makefile.in: Change POSTINSTALL to POST_INSTALL.
* tiedir/tie.1: Man page corrections from Eric S. Raymond
<esr@thyrsus.com>.
2005-01-08 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Correct check whether otangle is needed. From
Kenta MURATA <muraken20@yahoo.co.jp>.
* withenable.ac: Update references to e-Omega to Aleph. From
Kenta MURATA <muraken20@yahoo.co.jp>.
2004-12-29 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Version 7.5.4.
* doc/web2c.texi: Version 7.5.4.
* tex.ch: Shuffle the \eof18 code around a bit.
2004-12-28 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [16.211,46.1049]: I18N fix for |print_mode|, adding
|print_in_mode| function to account for differences in declination
etc. After Wlodzimierz Bzyl <matwb@univ.gda.pl>.
* mf.ch [28.585]: Sufficiently pathological code can overflow the
serial_no counter: add a check for this. From Thorsten Dahlheimer
<tdahlheim@gmx.net>.
* mp.ch [24.539]: Sufficiently pathological code can overflow the
serial_no counter: add a check for this. From Thorsten Dahlheimer
<tdahlheim@gmx.net>.
* tex.ch: Implement \ifeof18 to test whether \write18 is enabled.
A variant of the code submitted by Heiko Oberdiek
<oberdiek@uni-freiburg.de>.
2004-12-20 Olaf Weber <olaf@infovore.xs4all.nl>
* withenable.ac: Don't define IPC in c-auto.h if --enable-ipc
wasn't given.
* Makefile.in: configure depends on withenable.ac.
2004-12-19 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Old versions of flex don't support -l, but don't
support --version either, so use the latter to test whether the
former should be used. From Thomas.
* withenable.ac: Add --with-mf-x-toolkit option to replace
--with-x-toolkit. The latter couldn't be shared between mf and
xdvi any more.
* Makefile.in (tex-check, bibtex-check, dvicopy-check,
dvitomp-check, mpost-check): Add TEXMFCNF=../kpathsea to the
environment so the check works even if installation is not yet
complete. From Peter Breitenlohner <peb@mppmu.mpg.de>.
* Makefile.in (install-data): Don't install cwebdir/cweb.1; this
page now lives under .../man.
* Makefile.in (tangle.p): Depend on tangleboot, not $(TANGLEBOOT).
This means we build tangleboot even when cross-compiling. The
reason is that some versions of make get confused if we depend on
./tangleboot but only have rules with tangleboot as the target.
(ctangle.c,cweb.c): As above for $(CTANGLEBOOT).
Problem reported for Digital UNIX 4.0E make by Bernhard Simon
<simon@zid.tuwien.ac.at>.
2004-11-28 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (afmts): alambda -> lamed. Restrict the use of FF
to comments, as some make implementations cannot deal with it
otherwise.
2004-09-07 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Changes made by Karl Berry.
2004-08-30 Olaf Weber <olaf@infovore.xs4all.nl>
* dvitomp.ch: A more complete implementation of the color stack.
Slight modification of code provided by Eddie Kohler
<kohler@cs.ucla.edu>.
2004-08-28 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Document -output-directory.
* doc/install.texi: Correct cross-references for building formats.
* cpascal.h (output_directory): Added global variable.
* triptrap/texmf.cnf: Correct settings for main_memory.
* texmfmp-help.h: Add -output-directory to the help texts.
* dvitomp.ch: Allow for a variable number of spaces between the
'color push' special name and its argument. From Eddie Kohler
<kohler@cs.ucla.edu>.
2004-08-27 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Create etexdir in build tree if we're compiling
e-TeX.
2004-08-26 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch, mf.ch, tex.ch: |main_memory| is a size, while |mem_top|
is an index, so we need to subtract 1 when deriving |mem_top| from
|main_memory|. In a similar vein, we need to add 1 when
allocating the |mem| array. This may seem like nitpicking, but
matters for the trip and trap tests.
2004-08-26 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.in (patgen-check): Provide non-trivial test data.
* tests/dict, tests/patgen.in, tests/patterns, tests/translate:
Input data for patgen-check.
* tests/patout, tests/pattmp.4: New files.
Output from patgen-check.
2004-08-26 Olaf Weber <olaf@infovore.xs4all.nl>
* patgen.ch: Typo fixed by Peter Breitenlohner <peb@mppmu.mpg.de>.
* patgen.web: Typo fixed by Peter Breitenlohner
<peb@mppmu.mpg.de>. (New version 2.3, August 2004).
* Makefile.in (etex-dist,pdftex-dist): Account for etex.version
and pdftex.version as generated files.
2004-08-24 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [23.328]: Ensure that |source_filename_stack|[|in_open|]
and |full_source_filename_stack|[|in_open|] are initialized.
* tex.ch: Revise the file:line:error code to produce the correct
filename in the presence of \scantokens (an e-TeX extension). If
we're not reading from a file at all, fall back on the TeX-style
messages. This change introduces |print_file_line| to keep the
amount of code in the |print_err| macro under control.
2004-08-23 Karl Berry <karl@tug.org>.
* doc/web2c.texi: An extensive update.
2004-08-06 Olaf Weber <olaf@infovore.xs4all.nl>
* config.h: Clean the define of TEXDLL up. From Jan Nieuwenhuizen
<janneke@gnu.org>.
2004-08-05 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [29.530] prompt_file_name: don't allow the use of the
empty string for a file name. After Taco Hoekwater
<taco@elvenkind.com>.
* mf.ch [38.786] prompt_file_name: don't allow the use of the
empty string for a file name.
* mp.ch [35.763] prompt_file_name: don't allow the use of the
empty string for a file name.
2004-08-01 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (post-dist-$(distname)): Ensure that
texk/web2c/tests/xampl.bib is actually in the distributed tarball.
(bibtex-check): BIBINPUTS should only need $(srcdir)/tests.
2004-07-30 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Undo changes from --option to -option. This
generated too many differences with the TeX-live sources at this
time.
2004-07-23 Peter Breitenlohner <peb@mppmu.mpg.de>
* tex.ch: Reorganize handling of banner string in order to
reduce interference between eTeX, pdfTeX, and web2c change
files.
2004-07-23 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Use singe dash for -ini, -progname etc. Use
explicit -ini and -progname when running the trip test, because
the argv[0] name becomes lt-tex when using shared libraries, and
we have settings in triptrap/texmf.cnf that are sensitive to this.
* Makefile.in (bibtex-check): Add BIBINPUTS or check can fail.
2004-07-21 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Reorganize handling of integer parameters in order to
reduce interference between eTeX, pdfTeX, and web2c change files.
From Peter Breitenlohner <peb@mppmu.mpg.de>.
* fmtutil.in: Update from Thomas.
2004-07-14 Olaf Weber <olaf@infovore.xs4all.nl>
* mf.ch [42.912]: Remove this simplification of the web code,
which is no longer a valid assumption now that we're back to the
old print system.
* mp.ch: A smaller set of changes than for mf.ch, as in version
0.64 the |print|, |print_char|, |print_visible_char| system
previously implemented in the mp.ch change file was merged into
mp.web. Remove a reference to |slow_print| that was overlooked
earlier.
* mf.ch: Extensive changes to the print routines, to mirror what
was done for tex.ch (q.v.).
* tex.ch: Extensive changes to fix a problem with the encTeX
merge. Original TeX used |slow_print|, |print|, and |print_char|
for printing. This had been changed to |print|, |print_char|, and
|print_visible_char|, where the new |print_char| did the expansion
of unprintable characters to "escaped sequences" on the fly.
encTeX, it turns out, is too tightly interwoven with the old way
of doing things, leading to some strange breakage. So we've
largely reverted the code. In particular, we now store the
"escaped sequences" for non-ASCII characters again as strings, and
later decide on-the-fly whether to use those or just pass through.
This simplifies the change file, and narrows the distance to the
encTeX code.
* texmfmp.h (setupcharset): Removed.
(readtcxfile): Added. Unlike setupcharset, this function doesn't
initialize the xchr/xord/xprn arrays, it just updates them from a
tcx file. The name of the must be in the global
translate_filename.
* config.h: Add second argument to call of usagehelp. This is the
email address for bug reports. If NULL, the default address for
web2c is used.
* bibtex.ch: Add second argument to call of usagehelp.
* dvicopy.ch: Add second argument to call of usagehelp.
* dvitomp.ch: Add second argument to call of usagehelp.
* dvitype.ch: Add second argument to call of usagehelp.
* gftodvi.ch: Add second argument to call of usagehelp.
* gftopk.ch: Add second argument to call of usagehelp.
* gftype.ch: Add second argument to call of usagehelp.
* mft.ch: Add second argument to call of usagehelp.
* patgen.ch: Add second argument to call of usagehelp.
* pktogf.ch: Add second argument to call of usagehelp.
* pktype.ch: Add second argument to call of usagehelp.
* pltotf.ch: Add second argument to call of usagehelp.
* pooltype.ch: Add second argument to call of usagehelp.
* tangle.ch: Add second argument to call of usagehelp.
* tftopl.ch: Add second argument to call of usagehelp.
* vptovf.ch: Add second argument to call of usagehelp.
* vftovp.ch: Add second argument to call of usagehelp.
* weave.ch: Add second argument to call of usagehelp.
* cwebdir/comm-w2c.ch: Add second argument to call of usagehelp.
2004-07-12 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmp-help.h: Correct help strings of pdf*tex family. From
Akira Kakuto <kakuto@fsci.fuk.kindai.ac.jp>.
2004-07-04 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Move the creation of the format-related links to
format-related install rules; this seems to be a better place for
them, as the links are pointless without the corresponding
formats. Make the install-*-pool rules depend on the pool file in
question. Remove TEXMF=$(texmf) from the dumpenv; the
TEXMFCNF=../kpathsea should get us a texmf.cnf with suitable
absolute paths.
* tex.ch: Correct date in encTeX_banner.
2004-07-03 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: No m4 quoting needed in the KPSE_CROSS_BUILD_VAR
calls. The default of $BUILDLDFLAGS must be $BUILDXLDFLAGS.
* Makefile.in (web2c/fixwrites,web2c/spitup,web2c/web2c): These
also depend on web2c/kps.c.
[TANGLEBOOT,CTANGLEBOOT,TANGLE,CTANGLE,OTANGLE,TIE]: Add these
variabled so the build can use programs other than what is built.
Used when cross-compiling.
* configure.in: Add KPSE_CROSS_BUILD_VAR and KPSE_CROSS_PATH_PROG
invocations to set up cross-compiling. To cross-compile, you need
to have tangle, ctangle, otangle, and tie available on the build
machine.
* weave.ch: Set |max_names| to 10220, so we can still (barely)
handle pdfetex. Clearly a larger reworking is on the horizon.
* tex.ch: Change |mubyte_incs| into a boolean.
2004-07-02 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Update to encTeX from Petr Olsak. These fix three bugs.
These bugs are seen only in encTeX mode when \mubytein=1 and in
very rare cases. Petr's explanation follows:
1) If the control sequence is converted by \mubyte table but it is
not shrunk then the non-converted alternative of control sequence
is really used. It can be possible only if one-byte to one-byte
conversion is used and declared by \mubyte primitive. More common
is to use \mubyte for multi-byte to one-byte conversion. In such
situation, there is no problem because control sequence is
schrunk. Thanks to Wlodzimierz Bzyl for bugreport.
\def\aXb{xx}
\mubyte X Y\endmubyte
\mubytein=1
\aYb % writes "undefined control sequence \aXb" because
% error message is converted but real control sequence
% is not converted and \aYb is undefined.
2) If multi-byte to one-byte conversion is done during scanning of
control sequence name with the result: one-letter control
sequence, then this control sequence is not connected with
"native" one-letter control sequence but the new "multi-letter
control sequence" is allocated with only one letter in real.
\def\X{xx} % one-letter control sequence is defined
\mubyte X YZ\endmubyte
\mubytein=1
\YZ % writes "undefined control sequence \X" because \YZ is
% converted to \X but allocated as multi-letter control
% sequence, but one-letter control sequence is defined
3) If \catcode`\^^@=11 or 7 and if control sequence is terminated
by generated control sequence (from \mubyte conversion) then the
result of reading is unpredictable.
\def\XXX{xx}
\mubyte \XXX YZ\endmubyte
\mubytein=1 \relaxYZ % it is OK: \relax followed by \XXX
\par\catcode`\^^@=11
\relaxYZ % bad reading: \relaxYZ control sequence not defined
2004-06-30 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Updates to make conversion to HTML easier, from
Karl Berry.
2004-06-29 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/install.texi: Remove reference to --enable-auto-core. That
part of the code should be considered terminally broken.
2004-06-16 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: If the end-of-line character was disabled, we'd end up
dropping the last characters of filenames. Fixed by checking for
end-of-line only if we've just seen a space, which could be the
end-of-line space. Reported by Werner Lemberg <wl@gnu.org>.
2004-06-13 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch: Moving the re-parsing of |name_of_file| back to
|start_input|. The string administration gets confused if this is
done in |make_file_name|.
* tex.ch: Typo in comment. Remove some redundant material out of
the change file. Replace ' ' with " " in a number of places --
this is the difference between the external coding and the
internal ASCII-based coding of characters. Since the external
coding is ASCII on all platforms we currently compile on, this is
a place where mistakes in the web2c sources can linger.
* mf.ch: More changes to support spaces in filenames. In
particular, keep quotes around |cur_name|, |cur_ext|, and
|cur_area| iff these contain spaces. This incurs complications
because we re-parse |name_of_file| into these components after
opening a file. The file-printing routine is changed to ensure
that we print quotes if needed, but do not print any quotes
contained in the parameters themselves.
* mp.ch: More changes to support spaces in filenames. In
particular, keep quotes around |cur_name|, |cur_ext|, and
|cur_area| iff these contain spaces. This incurs complications
because we re-parse |name_of_file| into these components after
opening a file. The file-printing routine is changed to ensure
that we print quotes if needed, but do not print any quotes
contained in the parameters themselves.
2004-06-07 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch: Larger |max_in_open|, |param_size|, |max_write_files|.
* tex.ch: More changes to support spaces in filenames. In
particular, keep quotes around |cur_name|, |cur_ext|, and
|cur_area| iff these contain spaces. This incurs complications
because we re-parse |name_of_file| into these components after
opening a file. The file-printing routine is changed to ensure
that we print quotes if needed, but do not print any quotes
contained in the parameters themselves.
2004-06-04 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch: A slight change to ensure double quotes do not appear in
error messages when a filename has to be quoted.
* mf.ch: A slight change to ensure double quotes do not appear in
error messages when a filename has to be quoted.
* tex.ch: When dealing with a filename with unbalanced quotes,
still stop scanning when the buffer ends. Also a slight
modification to prevent double quotes from appearing in error
messages.
2004-06-01 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Delete some MLTeX code that was duplicated accidentally.
2004-05-31 Olaf Weber <olaf@infovore.xs4all.nl>
* mf.ch, mp.ch: xprn must be ASCII_code -- we story only 0 or 1
there, and 'boolean' is a full 4-byte entity. Worse, dummy_xprn
was already an ASCII_code, so in the presence of a TCX file we
didn't correctly undump the base/mem.
2004-05-26 Olaf Weber <olaf@infovore.xs4all.nl>
* cpascal.h: Remove -oem code.
2004-05-16 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch: In mpost, we need to use str_stop to find the end of a
string. Reported by Wlodzimierz Bzyl <matwb@univ.gda.pl>.
2004-05-14 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [5.58]: Remove code implementing the locale-dependent
printing. The most generous evaluation is that this was an
experiment that failed. The desired effect of having printable
eight-bit characters is handled through different mechanisms.
* Makefile.in: fmtutil-related changes from Thomas. May not be
completely correct yet.
* fmtutil.in: New version from TeX-live.
* texmfmp-help.h: Correct helptexts of pdf*tex for format
extensions.
2004-05-12 Olaf Weber <olaf@infovore.xs4all.nl>
* weave.ch: Increase max_refs and max_names for pdf*TeX.
Requested by Hartmut Henkel <hartmut_henkel@gmx.de>.
2004-05-10 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (ctie.c): Name of the change file changed from
ctie.ch to ctie-k.ch.
* web2c/ctiedir: update to latest source from ctan.
2004-05-09 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Add rules to compile, install, and distribute ctie.
* Add ctie to distribution, it lives in web2c/ctiedir.
* Makefile.in (post-dist-$(distname)): Remove cweb.c when creating
a distribution. Must be done explicitly because cweb is not a
program itself.
(ctangleboot.c, cwebboot.c): Make these rules more robust in the
presence of timestamp problems. You could get a empty files and a
failed build otherwise.
2004-05-08 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (install-mf-links, install-mpost-links,
install-tex-links): Do not create initex, virtex, inimf, virmf,
inimpost, virmpost links on installation. These are all way more
trouble than they're worth.
* mp.ch: Use TEXMF_POOL_NAME and TEXMF_ENGINE_NAME, and replace
hard-coded mf.pool with pool_name in messages.
* mf.ch: Use TEXMF_POOL_NAME and TEXMF_ENGINE_NAME, and replace
hard-coded mf.pool with pool_name in messages.
* tex.ch: Change TEX_POOL_NAME and TEX_ENGINE_NAME into
TEXMF_POOL_NAME and TEXMF_ENGINE_NAME.
* texmfmp.h: Change TEXPOOLNAME and TEXENGINENAME into
TEXMFPOOLNAME and TEXMFENGINENAME.
* doc/web2c.texi: Document -halt-on-error.
* texmfmp-help.h: Document -halt-on-error.
* Makefile.in: Correct dependencies on $(basedir), $(memdir),
instead of $(fmtdir). This matters now that they differ.
* Makefile.in: Include md5 dir in libs-dist target.
* Makefile.in: Remove $(all_formats); it has become obsolete.
Simplify clean pattern now that only one format extension is left.
* Makefile.in: We use .fmt as the extension for all formats. This
means that latex.fmt gets built by e-TeX (as requested by the
LaTeX2e group). So remove that target from the rules for TeX.
* texmfmp-help.h: Change the various -*fmt options to actually
spell -fmt.
* tex.ch: Implement halt-on-error, and quoted filenames.
* mf.ch: Implement halt-on-error, and quoted filenames.
* mp.ch: Implement halt-on-error, and quoted filenames.
2004-05-07 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Remove eomega-related code. Add aleph-dist target.
* configure.in: Remove e-Omega code. Enable pdflib for all
members of the pdfTeX family.
* texmfmp-help.h: Add -8bit to help text.
* doc/web2c.texi: Document interaction between -8bit and TCX.
* doc/web2c.texi: Document -8bit option.
* mp.ch: Add a magic number to the dump, add engine name to dump,
dump xord, xchr, xprn, so a TCX file during INI is persistent.
* mf.ch: Add a magic number to the dump, add engine name to dump,
dump xord, xchr, xprn, so a TCX file during INI is persistent.
* tex.ch: Always dump the xord, xchr, and xprn arrays, so loading
a TCX file in INI mode will change these defaults for all users of
the format. Implement an 8bit option that switches all characters
to printable by default. Reorganize the code a bit.
2004-04-21 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [5.71]: An error in the encTeX merge (not encTeX itself)
made TeX ignore commands given at the error "?" prompt. Reported
by Akira Kakuto <kakuto@fsci.fuk.kindai.ac.jp>.
2004-04-16 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Modify error messages involving tex.pool, so they use
pool_name instead of the hard-coded name. Implement checking for
the name of the engine, which is now stored in the format file.
* texmfmp.h: Add proper definitons of TEXENGINENAME for each
engine.
2004-04-08 Olaf Weber <olaf@infovore.xs4all.nl>
* bibtex.ch [10]: Add 'hack0' to initialize jmp9998. This had to
be moved up because otherwise we could end up doing the longjmp
before the setjmp. Reported by Sven Luther
<luther@dpt-info.u-strasbg.fr>.
2004-03-28 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Change type of parse_first_line_p,
file_line_error_style_p, and shell_escape_p from boolean to
c_int_type. They're used as booleans in the Pascal code, but
tri-state in the C code.
* texmfmp-help.h: Document -no-shell-escape, -no-parse-first-line,
-no-file-line-error.
* doc/web2c.texi: Document -no-shell-escape, -no-file-line-error,
-no-parse-first-line.
2004-03-25 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmp-help.h: Bring help text up-to-date.
* tex.ch: Simplify some of the encTeX-related code.
* configure.in: Add test for Aleph.
* Makefile.in: Reorganization to mode pdftexlib-related code to
its own makefile fragment. Also rewrite the rules for the engines
so it becomes easier to omit specific engines from the default
compilation.
2004-03-24 Olaf Weber <olaf@infovore.xs4all.nl>
* cpascal.h: Add definition of floor() for dvitomp. After Hartmut
Henkel <hartmut_henkel@gmx.de>.
* dvitomp.ch [49,50]: For the code to work, Hobby notes that we
need |round|(|x|-0.5) to be equal to $\lfloor x\rfloor$. For
Pascal's |round| function this is emphatically not true. After
Hartmut Henkel <hartmut_henkel@gmx.de>.
* dvitomp.ch: Support for color specials, like those generated by
the colordvi package. From Eddie Kohler <kohler@cs.ucla.edu>.
2004-03-23 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Clarify use of special_printing in comment.
2004-03-22 Olaf Weber <olaf@infovore.xs4all.nl>
* dvitomp.ch [57]: Off-by-one error in virtual font handling.
From Hartmut Henkel <hartmut_henkel@gmx.de>.
* tex.ch: Correct comment so the file weaves properly.
2004-03-21 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: encTeX merge. Code from Petr Olsak, with modifications
to match the rest of web2c better.
2004-03-18 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in [testenv]: somehow the LC_ALL=C got dropped.
2004-03-17 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Double sup_font_mem_size to 2000000.
* triptrap/texmf.cnf: Add mem_bot.tex and mem_bot.initex, set
main_memory.{ini,}tex to 3000.
* tex.ch: Make mem_bot configurable (0 and 1 only allowed values).
Used for the trip test.
2004-03-14 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Modifications for Aleph.
* texmfmp.h: Mods for Aleph.
* texmfmem.h: Add Aleph.
* texmfmp-help.h [Aleph]: ALEPHHELP.
2004-02-26 Olaf Weber <olaf@infovore.xs4all.nl>
* tangle.ch: Treat pool files as binary files, not text files
(matters on some platforms).
* pooltype.ch: Treat pool files as binary files, not text files
(matters on some platforms).
* mp.ch [43.1195]: Use kpse_fontmap_format to find psfonts.map.
* tex.ch: Rename is_printable to xprn.
* mp.ch: Rename is_printable to xprn.
* mf.ch: Rename is_printable to xprn.
* withenable.ac: Add --without-pdfxtex.
* texmfmp.h (undumpint): Treat WIN32 as if REGFIX is set.
* texmfmp.h: Add define for kpsefontmapformat.
* texmfmp.h: Add support for pdfxTeX.
* fmtutil.in: Sync with TeXlive.
* configure.in: Add support for pdfxTeX.
* configure.in: If LEX is (autodetected) flex, add -l option. We
need this for omegafonts.
* help.h [MFT]: Allow several -style options.
* mft.ch: Implement multiple style files (multiple -s options) for
mft.
* patgen.ch: Increase trie_size, triec_size. Do not remove the
close_in, close_out operations.
* tex.ch [6.82]: Do not force scroll_mode for file:line:error
style messages.
* cwebdir/comm-w2c.ch: Correct documentation of CWEBINPUTS.
Initialise kpathsea_debug.
2004-01-11 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Initialize source_filename_stack[0],
full_source_filename_stack[0] -- these can be read under some
circumstances. Found by Krank Kter <frank@kuesterei.ch>.
* tex.ch: Correct printing of |src_specials| when weaving.
2003-10-21 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Work around flex 2.5.x issue (affecting pl.l in
the Omega code) by adding -l flag if we're using flex. From
Thomas.
2003-02-19 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.5.2.
* configure.in: Version 7.5.2.
* Makefile.in: Remove vestiges of --with-etex=tex option.
(mf-clean): There is no $(mfw_o).
(install-data): install-dumps is conditional on --disable-fmtutil.
* configure.in (--enable-fmtutil): Implementation.
(--without-etex): Simplify --with-etex to an on/off switch.
(--with-mf-nowin): Simplify --with-mfw to an on/off switch for a
binary that is guaranteed to contain no windowing support.
* fmtutil.in: Replace occurrences of @TEXBIN@ with tex.
* withenable.ac (--without-etex): Replaces complex --with-etex
rule.
(--with-mf-nowin): Replaces complex --with-mfw rule.
(--enable-fmtutil): Just the help text.
2003-02-17 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.5.1.
* configure.in: Version 7.5.1.
* Makefile.in (gftodvi-clean): Remove gftodvi.h.
(gftopk-clean): Remove gftopk.h.
(programs): Add $(pdftosrc).
* fmtutil.in: Remove mfw rule (sync with teTeX/TeX Live).
* withenable.ac: New option: --enable-fmtutil.
* doc/Makefile.in: Need to add kpathsea.mk, as we now use libtool
in the clean rule, and it isnt' found otherwise.
2003-02-16 Olaf Weber <olaf@infovore.xs4all.nl>
* triptrap/tripin.log: Update from Knuth for TeX 3.141592.
* triptrap/trip.typ: Update from Knuth for TeX 3.141592.
* triptrap/trip.tex: Update from Knuth for TeX 3.141592.
* triptrap/trip.log: Update from Knuth for TeX 3.141592.
* triptrap/trip.fot: Update from Knuth for TeX 3.141592.
* triptrap/mftrapin.log: Update from Knuth for MF 2.71828.
* triptrap/trap.typ: Update from Knuth for MF 2.71828.
* triptrap/mftrap.log: Update from Knuth for MF 2.71828.
* triptrap/mftrap.fot: Update from Knuth for MF 2.71828.
* weave.web: WEAVE 4.4 from Knuth - same version number, minor
change.
* tangle.web: TANGLE 4.5 from Knuth: prevents modno-comments from
being split across lines.
* vftovp.web: VFtoVP 1.3 from Knuth: made out_as_fix tell the
truth in overflow cases.
* mf.web: MF 2.71828 from Knuth: suppressed autorounding in
dangerous cases.
* tex.web: TeX 3.141592 from Knuth: fixed \xleaders, glueset,
weird alignments.
* tex.ch: Update banner for TeX 3.141592.
* Makefile.in (vptovf-clean): Correct typo.
(tangleboot.p): Copy from srcdir if it isn't in builddir, otherwise
builds outside the source dir are broken.
2003-02-15 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.5.0.
* configure.in: Version 7.5.0.
* Makefile.in: From klibtool to libtool. Based on patches from
Albert Chin-A-Young <china@thewrittenword.com>.
* Makefile.in: Various changes to make e-TeX the engine under
LaTeX2e.
(dvicopy-check): Add VFFONTS definition.
(programs): mpost was mentioned twice.
(web-dist): Remove eomega.web file, as it is a generated one.
* mft.ch [8]: Increase max_bytes and max_names.
2003-02-07 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.4.6.
* configure.in: Version 7.4.6. e-Omega support.
* withenable.ac: e-Omega support.
* texmfmp.h: e-Omega support.
* texmfmp-help.h: e-Omega support.
* texmfmem.h: e-Omega support.
* config.h: NO_FMTBASE_SHARE -> NO_DUMP_SHARE. Was overlooked for
a long time. Found by Nix <nix@esperi.demon.co.uk>.
* Makefile.in: Rewritten to a more "modular" structure: rules
related to one target are now mostly found together. Rules for
e-TeX, pdfTeX and so on are now mostly in the subsidiary
makefiles.
2003-01-29 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.4.5.
* configure.in (AC_CHECK_FUNCS): Add mkstemp, mktemp.
Version 7.4.5.
2003-01-28 Olaf Weber <olaf@infovore.xs4all.nl>
* withenable.ac: Indicate that --with-mfw=yes is currently the
default.
* fmtutil.in: Add comment on how to change the engine for LaTeX to
e-TeX. From Thomas.
2003-01-24 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [5.58/59]: Check the is_printable array when writing to
files, but check isprint(3) when printing to the terminal or the
log file.
* Makefile.in: Add pdftosrc to compiled programs.
* cwebdir/comm-w2c.ch: Use DEV_NULL instead of hard-coding
/dev/null. Reported by Fabrice Popineau.
2003-01-16 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Version 7.4.4.
* doc/web2c.texi: Version 7.4.4.
2003-01-15 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (testenv): Use LC_ALL=C, not LANG=C, as only the
former will actually force the locale to C.
2003-01-14 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Increase ssup_max_strings, sup_main_memory,
sup_pool_size, so the large consumers can eat their fill.
* Makefile.in (install-links): Omega formats end in .oft now.
Spotted by Peter Breitenlohner <peb@mppmu.mpg.de>.
2003-01-11 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.4.3.
* configure.in: Version 7.4.3.
2003-01-10 Olaf Weber <olaf@infovore.xs4all.nl>
* cwebdir/cweav-w2c.ch: Remove 'k' from banner.
* cwebdir/ctang-w2c.ch: Remove 'k' from banner, we're already
declaring we're part of web2c, and this is more consistent with
the other programs.
* cwebdir/comm-w2c.ch: Add --help and --version option, after code
supplied by Julian Gilbey.
* help.h [CWEB]: Add CWEAVEHELP and CTANGLEHELP.
* Makefile.in [testenv]: Add LANG=C to trip environment for
consistent results.
2002-12-25 Olaf Weber <olaf@infovore.xs4all.nl>
* cwebdir/comm-w2c.ch: Remove code that adds ".web", kpathsea will
handle this. Ensure that when kpse_find_file returns a filename,
it is used for #line directives and such.
2002-12-23 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Version 7.4.2.
* doc/web2c.texi: Version 7.4.2.
* doc/Makefile.in (install-data): Test for web2c.info explicitly
in current directory, because some versions of make prepend the
source dir path otherwise. From Thomas Esser
<te@dbs.uni-hannover.de>.
* Makefile.in (clean): Add 'mf' to the targets always removed.
(mf): Explicit target needed if --with-mfw=yes was given.
Thanks to Dragan Milicic <dragan@math.utah.edu>.
2002-12-20 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Version 7.4.1.
* doc/web2c.texi: Version 7.4.1.
2002-12-19 Olaf Weber <olaf@infovore.xs4all.nl>
* cwebdir/cweav-w2c.ch (reduce, squash): While creating the
prototypes I got the order of the arguments wrong.
2002-12-14 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.4.0.
* configure.in: Version 7.4.0.
* Makefile.in: Changes for mf/mf-nowin handling. From Thomas.
* Makefile.in: Remove references to the share/* files.
* share/*: Remove files from this subdirectory. They are the kind
of files that should be distributed in the texmf tree.
* cwebdir/cweav-w2c.ch: Add prototype information.
* cwebdir/ctang-w2c.ch: Add prototype information.
* cwebdir/comm-w2c.ch: Add prototype information.
2002-11-30 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch [46.1307]: A previous change dropped the call of
fix_date_and_time in non-ini mode, so we always got the date of
the creation of the mem file. Repoerted by Hartmut Henkel
<hartmut_henkel@gmx.de>.
* bibtex.ch [106]: Correct logic of comparison.
* bibtex.ch [106]: Make sure name_length is at least as long as
the length of the extension before checking for the extension.
* bibtex.ch [106]: Check for aux extension '.aux' not 'aux'. When
'.aux' is already present, take that into account when generating
the derived filenames. Reported by Emmanuel Jeandel
<ejeandel@ens-lyon.fr>.
2002-11-16 Olaf Weber <olaf@infovore.xs4all.nl>
* mf.ch [3.36]: write_ln instead of write for '! End of file on
the terminal... why?' message. From Hartmut Henkel
<hartmut_henkel@gmx.de>.
* mp.ch [3.36]: write_ln instead of write for '! End of file on
the terminal... why?' message. From Hartmut Henkel
<hartmut_henkel@gmx.de>.
2002-11-13 Olaf Weber <olaf@infovore.xs4all.nl>
* cwebdir/comm-w2c.ch: Add copyright + license (public domain).
* cwebdir/ctang-w2c.ch: Add copyright + license (public domain).
* cwebdir/cweav-w2c.ch: Add copyright + license (public domain).
* doc/web2c.texi: To 7.3.11.
* cwebdir/cweav-w2c.ch: Increase max_file_name_length from 60 to
1024.
* cwebdir/ctang-w2c.ch: Increase max_file_name_length from 60 to
1024.
* cwebdir/comm-w2c.ch: Increase max_file_name_length from 60 to
1024.
* configure.in: To 7.3.11.
* bibtex.ch [32,33]: Characters in the range [128..255] would be
dropped by some of BibTeX's internal functions, like purify$.
Allow them to pass through.
* Makefile.in: Remove libs/xpdf/aconf.h when creating a
distribution for pdftex.
2002-11-12 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (install-links): Misspelled pdffmts; found by Joern
Clausen <joern@techfak.uni-bielefeld.de>.
* doc/web2c.texi: Correct expansion of GPL.
* Makefile.in: Use $(man1dir) for manual pages.
2002-11-11 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Version 7.3.10.
* cwebdir/ctang-w2c.ch: Cleanup comments.
* cwebdir/comm-w2c.ch: Cleanup comments.
* cwebdir/cweav-w2c.ch: Cleanup comments.
* Makefile.in: Renaming of tie.ch to tie-w2c.ch. Install the
ctangle and cweave manual pages. Like the tie manual page, these
really should be updated for web2c.
* tie.ch -> tie-w2c.ch: Renaming to get a more consistent naming
convention.
* tiedir/tie.c: Reverting to the original from tie-2.4, as the way
in which tie.c is generated has changed: now we run ctangle during
the build.
* cwebdir/{ctang,comm,cweav}-w2c.ch: Changefiles to have CWEB use
kpathsea. First implementation by Wlodek Bzyl, with modifications
by Olaf Weber.
* cwebdir: Adding the sources of CWEB here.
* Makefile.in: Changes to support the addition of CWEB. Also use
the opportunity to remove shared_env, which is a dead variable.
* Makefile.in (install-data): Install fmtutil.cnf.
* fmtutil.in: New file. Used by teTeX, but not (at present!) by a
"bare" web2c installation, if such a thing exists anymore.
* share/typeface.map: Update to 2002-10-12.
* share/special.map: Add 'vn' for Vietnamese CM.
* doc/web2c.texi: Document the -parse-first-line option.
* texmfmp-help.h: Document the -parse-first-line option.
* tex.ch: Commented out: add code to 29.523 to set the
kpse_program_name to the name of the format found. This can be
both a good and a bad idea: its sets the format name properly in
case we do something like 'tex &latex file.tex' (when we want the
latex search paths) but is almost certainly wrong if we have
'latex &mylatex file.tex' (when we also want the latex search
paths).
* mp.ch: Commented out: add code to 35.755 that would set the
kpse_program_name to the name of the format found.
* mf.ch: Commented out: add change to 38.788 that would set the
kpse program name to the name of the format found.
* cpascal.h: Add kpseresetprogramname to the defined symbols.
2002-10-22 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmp-help.h: Document -oft option (which was renamed to match
the extension name).
* doc/web2c.texi: Version 7.3.9.
* configure.in: Version 7.3.9.
* Makefile.in: Changes to get the Omega dump file extension from
fmt to oft.
2002-10-20 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Use the -jobname option when dumping formats,
bases, mems.
* share/supplier.map: Update to 2002-3-3.
* share/typeface.map: Update to 2002-4-4.
* doc/web2c.texi: Document -jobname option. Correct description
of -fmt, -efmt, -base, -mem options, as they no longer set the
name to of the dumpfile written in ini mode.
* texmfmp-help.h: Document -jobname option in help texts.
* mf.ch [38.793]: Add support for --jobname option.
* mp.ch [35.770]: Add support for --jobname option.
* tex.ch [29.537]: Add support for the --jobname option.
* tangle.ch [50,53,58,63,116,...]: Make unambig_length a variable,
with default def_unambig_length. Implement the optional
case-smashing and underline-retention.
* doc/web2c.texi: Document the new options of tangle.
* help.h [TANGLEHELP]: Document the new options.
2002-10-11 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version to 7.3.8.
* NEWS: Updates for 7.3.8.
* doc/web2c.texi: Typo.
* tex.ch: Settle on text for the not-TeX banner -- just add a 'k'
to the name, so we get TeXk, e-TeXk, pdfTeXk, and so on.
2002-10-06 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch [3.32]: Add parse_first_line_p variable.
[5.31]: Print not-TeX banner if parse_first_line_p is true.
[29.536]: Write not-TeX banner to log file when parse_first_line_p
is true; also when file_line_error_style_p is true (was omitted
earlier).
* mp.ch [1.13]: Add parse_first_line_p variable.
* mf.ch [1.13]: Add parse_first_line_p variable.
* doc/web2c.texi: Add warning about non-conformity of source
specials.
* tex.ch [5.16]: TeX would claim that source specials are enabled
when file:line:error styles were enabled.
* configure.in: TeXlive merge: changes to the cxx_runtime_hack
code.
* config.h [WIN32]: TeXlive merge.
* Makefile.in: Inhibit parallel makes, as these cause trouble with
the way the rules are (currently) written. Remove references to
libtiff. TeXlive merge.
2002-07-10 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Update notes on the --src option.
* tex.ch [47.1091]: Back out the change that moved the generation
of src_specials. It in turn led to markedly different results in
"normal" input that is considerably more common than the
constructions that prompted the change. The upshot is that at
present I know of _no_ non-intrusive way to implement source
specials, and enabling them may break your documents in unexpected
ways. Found by the ever vigilant Akira Kakuto
<kakuto@fsci.fuk.kindai.ac.jp>, for which my thanks.
2002-06-09 Olaf Weber <olaf@infovore.xs4all.nl>
* bibtex.ch [324]: Add comments clarifying the change and its
limitation.
* bibtex.ch [324]: When breaking output lines, try to avoid
splitting a \% combination. Reported by Agthorr
<agthorr@barsoom.org>.
2002-06-02 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Insert a newline after the "file:line:error enabled"
console message.
* tex.ch: Implement banner change for source specials. Also
implement the printing of additional lines if source specials,
\write18, or file:line:error style messages are enabled. Change
the source specials to use a "frozen" \special token so that
redefinition of \special doesn't affect the working of this
option. Delay the generation of everypar source specials until
after the \everypar processing has been done, because they could
be easily "captured" otherwise (reported by Petr Olsak
<olsak@math.feld.cvut.cz>).
* doc/web2c.texi: Note that enabling source specials can have
unexped effects.
2002-04-02 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Replace the use of a '#.#' pattern to comment out
options with the use of '#! '. Requested by Gerben Wierda.
* configure.in: Add implementation of --with-cxx-runtime-hack: it
allows the GNU C++ libraries to be statically linked, which makes
binaries marginally more transportable between hosts.
* Makefile.in (pdftex,pdfetex): Add @CXXLDEXTRA@ to support the
--with-cxx-runtime-hack option.
* withenable.ac: Add --with-cxx-runtime-hack option. (Thomas
Esser).
2002-03-25 Olaf Weber <olaf@infovore.xs4all.nl>
* dvitomp.ch [5]: Increase virtual_space to accomodate Korean
users. Suggested by Kong Hoon Lee <konghoon@dreamwiz.com>.
2001-12-17 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Increase trie_op_size (and match with neg_trie_op_size)
to accomodate larger hyphenation tables. Value suggested by
Thomas Esser <te@informatik.uni-hannover.de>.
2001-11-27 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Version 7.3.7.
* configure.in: Version 7.3.7.
* configure.in: Add AC_C_INLINE, to deal with the fact that pdfTeX
likes to use inline functions.
2001-11-25 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: ipc_on must be c_int_type, not integer, because it is
used in the option code.
* Makefile.in (pdftex-dist): Add xpdf sources to this tarball.
(libs-dist): New target for additional libraries used by pdftex.
(bibtex-check): Use the just-created texmf.cnf, not an already
installed one.
2001-11-20 Olaf Weber <olaf@infovore.xs4all.nl>
* share/variant.map: Update.
* share/typeface.map: Update.
* share/supplier.map: Update.
* share/adobe.map: Update.
2001-11-19 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Changes to keep C++ compilers from choking.
* mp.ch: Changes to keep C++ compilers from choking.
* bibtex.ch: Changes to keep C++ compilers from choking.
2001-11-18 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Version 7.3.6.
* tiedir/tie.c: Regenerated for tie.w and tie.ch.
* doc/web2c.texi: Update version. Document --recorder option.
* vftovp.ch: Changes to keep C++ compilers from choking.
* texmfmp-help.h: Document --recorder option.
* tex.ch: Changes to keep C++ compilers from choking. Add support
for the filename recorder.
* mp.ch: Changes to keep C++ compilers from choking. Add support
for the filename recorder.
* mf.ch: Changes to keep C++ compilers from choking. Add support
for the filename recorder.
* gftodvi.ch: Changes to keep C++ compilers from choking.
* dvitype.ch: Changes to keep C++ compilers from choking.
* dvitomp.ch: Changes to keep C++ compilers from choking.
* dvicopy.ch: Changes to keep C++ compilers from choking.
* cpascal.h: Additions for the filename recorder.
* bibtex.ch: Changes to keep C++ compilers from choking.
* NEWS:
* Makefile.in (tie): Link tie with lib.
2001-11-14 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Check for headers sys/time.h, sys/timeb.h, and
functions gettimeofday, ftime.
* tangle.ch: Increase limits for constants and expressions to
allow tangle to build otangle.
* Makefile.in: Drop otangleboot target; otangle will be built by
tangle, not by itself.
2001-11-10 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Update date, add documentation for
-file-line-error-style and -src-specials.
* texmfmp-help.h: Update help for -file-line-error-style and
-src-specials.
* configure.in: Version 7.3.5.
* tex.ch: Change the calls of xmalloc_array to account for the new
interface.
* mp.ch: Change the calls of xmalloc_array to account for the new
interface.
* mf.ch: Change the calls of xmalloc_array to account for the new
interface.
* cpascal.h (stringcast): Added to help the Omega people push
their sources through a C++ compiler.
* cpascal.h (xmallocarray): Moved from texmfmp.h, as Omega wants
to use it in more places. Note that the interface changed!
* texmfmp.h (xmallocarray): Moved to cpascal.h for the Omega
merge.
* Makefile.in (prereq-check): Explicitly require a 'progname'
argument to set the program name, instead of allowing such an
option to be part of the 'files' argument.
2001-11-01 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (tangleboot.p): Test whether ./tangle exists -- this
rule can be triggered if tangleboot.p's timestamp is too old.
2001-10-30 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: To 7.3.4.
* doc/web2c.texi: xref correction.
* tex.ch: Increase trie size. Add support for source specials.
* tangle.ch [8]: Increase max_names, max_tests to 10000.
* configure.in: Check for libm added. If it is there, we do
unconditionally link it, which is probably wrong.
* Makefile.in [makeargs]: Add LDFLAGS.
2001-10-26 Olaf Weber <olaf@infovore.xs4all.nl>
* cpascal.h: Add defines for kpsesetprogramname and kpsempformat.
* help.h [MFT]: Add -metapost description.
* mft.ch: Support for METAPOST files. Based on changes supplied
by Wlodek Bzyl <matwb@univ.gda.pl>.
* texmfmp-help.h: Add IPC help text to etex, pdftex, pdfetex.
* mp.ch: Make path_size a configuration option.
2001-10-24 Olaf Weber <olaf@infovore.xs4all.nl>
* weave.ch: Modify usage/usage_help invocation. Use kpathsea to
find web and change files.
* vftovp.ch: Modify usage/usage_help invocation.
* vptovf.ch: Modify usage/usage_help invocation.
* tftopl.ch: Modify usage/usage_help invocation.
* texmfmp-help.h: Remove double end-of-comment.
* tex.ch: Modifications for file:line:error style messages.
* tangle.ch: Modify usage/usage_help invocation. Find web and
change files using kpathsea.
* pooltype.ch: Modify usage/usage_help invocation.
* pltotf.ch: Modify usage/usage_help invocation.
* pktype.ch: Modify usage/usage_help invocation.
* pktogf.ch: Modify usage/usage_help invocation.
* patgen.ch: Modify usage/usage_help invocation.
* mp.ch: Modifications for file:line:error style messages.
* mft.ch: Modify usage/usage_help invocation.
* mf.ch: Modifications for file:line:error style messages.
* gftype.ch: Modify usage/usage_help invocation.
* gftopk.ch: Modify usage/usage_help invocation.
* gftodvi.ch: Modify usage/usage_help invocation.
* dvitype.ch: Modify usage/usage_help invocation.
* dvitomp.ch: Modify usage/usage_help invocation.
* dvicopy.ch [5]: Increase max_fonts.
[7]: Rename integer types to names that do not collide with the new
C99 names.
[system-dependent]: Modiy usage/usage_help invocation.
* cpascal.h (readln): Remove macro, add function prototype.
(kpsewebformat): Added.
* config.h (usage,usage_help): Change/add prototypes.
* bibtex.ch: Changes to usage/usage_help invocation.
* Makefile.in: install-programs [OMEGA]: add install-links for
omegadir sub-make.
2001-10-02 Olaf Weber <olaf@infovore.xs4all.nl>
* mf.ch [48.1200]: mf.web was changed to use 4-diget years, so
that change could be removed here.
* tex.ch [50.1328]: Master tex.web was changed to print 4-digit
years, so that change is removed here.
2001-09-27 Olaf Weber <olaf@infovore.xs4all.nl>
* tangle.ch: Add "parametric2" macros, which are macros where the
argument is delimited by [] instead of ().
2001-04-23 Olaf Weber <olaf@infovore.xs4all.nl>
* cpascal.h (readln): Accept both CR and LF as end-of-line
characters.
2000-08-25 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Replace the ugly ""$(var) construct with something
more robust. Thanks Thomas.
* config.h: Make sure we get the right c-auto.h. From Han The
Tanh.
* Makefile.in: Changes to support omega 1.15. Earlier versions
are implicitly no longer supported because of these.
* configure.in: Changes to support omega 1.15.
2000-08-05 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Bump version, year.
* configure.in: Update for 7.3.3.
* NEWS: Update for 7.3.3.
* mf.ch: Read buf_size from texmf.cnf, just like TeX and MP do.
2000-04-25 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/ref.tex: Update reference codes for the bib files I'm using.
* mp.ch [35.782]: Use the kpse_mp_format for "readfrom" files,
instead of no path at all.
* vftovp.ch [25]: Both nl and lig_size are in words, so the
multiplication is not needed. Found by "C.M. Connelly"
<c@eskimo.com> and Melissa O'Neill <oneill@cs.sfu.ca>.
* tftopl.ch [20]: Both nl and lig_size are in words, so the
multiplication is not needed. Found by "C.M. Connelly"
<c@eskimo.com> and Melissa O'Neill <oneill@cs.sfu.ca>.
2000-04-21 Olaf Weber <olaf@infovore.xs4all.nl>
* tangle.ch: Increase zz.
* doc/web2c.texi: Document the win32-specific -oem option. From
Fabrice.
* cpascal.h [OEM]: Additions for oem.c, from Fabrice.
2000-04-19 Olaf Weber <olaf@infovore.xs4all.nl>
* patgen.ch: Correct off-by-one in filename generation of
pattmp.x.
2000-04-13 Olaf Weber <olaf@infovore.xs4all.nl>
* dvitype.ch: Fix parsing of --output-level option to match
documentation. Spotted by DEK.
2000-04-03 Olaf Weber <olaf@infovore.xs4all.nl>
* dvicopy.ch: Increase max_widths, max_packets, max_bytes.
* configure.in: If fmtutil.in is found, create fmtutil.cnf.
* cpascal.h (readln): Explicit int to get rid of warning.
* Makefile.in: Changes for pdfTeX, from Han The Thanh
<thanh@informatics.muni.cz>.
* configure.in: Some of the "special hacks" that allow for
cross-compilation have been moved to acspecific.m4. From Han The
Thanh <thanh@informatics.muni.cz>.
2000-04-02 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Correction: -translation-file -> translate-file.
Spotted by Etienne Riga <etienne.riga@skynet.be>.
2000-03-22 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch: Parametrize the size of the line buffer. From Fabrice
Popineau <Fabrice.Popineau@supelec.fr>
2000-03-21 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Allow spaces in the path leading up to the texmf tree.
(But not in the tree itself.) From Stefan Haller <stk@snafu.de>.
* mp.ch: Allow spaces in the path leading up to the texmf tree.
(But not in the tree itself.) After Stefan Haller <stk@snafu.de>.
* mf.ch: Allow spaces in the path leading up to the texmf tree.
(But not in the tree itself.) From Stefan Haller <stk@snafu.de>.
2000-03-02 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.ch: i18n fix modeled on that for TeX.
* mf.ch: i18n fixes modeled on those for TeX.
2000-03-01 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Several changes for i18n, from Wlodzimierz Bzyl
<matwb@monika.univ.gda.pl>.
1999-09-26 Olaf Weber <olaf@infovore.xs4all.nl>
* patgen.ch: Correct filename generation to generate the extension
of pattmp.x. Reported by Werner Lemberg <wl@gnu.org>.
1999-06-28 Olaf Weber <olaf@infovore.xs4all.nl>
* dvitomp.ch: A checksum failure should result in a warning, but
not in a non-zero return code. This was done correctly in one
location, wrong in another. Reported by Berthold H lmann.
1999-05-30 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Update version to 7.3.1.
* NEWS: Update for 7.3.1.
* doc/web2c.texi: Update version info.
* share/bitstrea.map, share/special.map, share/texfonts.map,
share/typeface.map, share/urw.map: Updates provided by Thomas.
* share/linot-cd.map: linotype-cd.map, new fontmap file.
* share/cp8bit.tcx, share/kam-cs.tcx, share/kam-t1.tcx: New files
(received through Thomas Esser).
1999-05-29 Olaf Weber <olaf@infovore.xs4all.nl>
* New set of share/*tcx files from Staszek Wawrykiewicz
<StaW@gust.org.pl>.
* tex.ch: Bump sup_buf_size to 300000. Several other constants
should probably be increased as well.
* Makefile.in: Several changes to get pdftex compilation to work
better.
* AUTHORS: Update to reflect current maintainer situation.
* README: Added my email address.
1999-03-26 Olaf Weber <olaf@infovore.xs4all.nl>
* tex.ch: Increase sup_nest_size, sup_param_size, sup_stack_size.
* configure.in: Bump WEB2CVERSION to 7.3.
1999-03-23 Olaf Weber <olaf@infovore.xs4all.nl>
* withenable.ac: Remove AM_MAINTAINER_MODE,
--with-mktextex-default option.
* acconfig.h: Remove definition of MAKE_TEX_TEX_BY_DEFAULT.
* configure.in: Include kpathsea/withenable.ac for the definition
of texmfmain in the Makefile.
1999-03-15 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Updates for tcx files, with many thanks to
"Staszek Wawrykiewicz" <StaW@gust.org.pl>.
* withenable.ac: Add AM_MAINTAINER_MODE.
* help.h: Update help strings for tcx files.
* acconfig.h: New file, with the web2c-specific configuration
parts.
* configure.in: Additions to make the configuration process work.
* config.h: Now include c-auto.h now that kpathsea/config.h
doesn't do this anymore.
1999-02-18 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in (pdftex-dist): Don't include pdftex's *.o files.
1999-02-16 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmem.h: Changes to support Omega. From John Plaice.
1999-02-14 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmp.h [!Omega]: Code changes to enable writing the tcx file
name to terminal and log.
[pdfTeX,pdfeTeX]: Remove inclusion (moved to coerce.h).
* tex.ch: Write the name of the tcx file (if any) to terminal and
log.
* mp.ch: Write the name of the tcx file (if any) to terminal and
log.
* mf.ch: Write the name of the tcx file (if any) to terminal and
log.
* Makefile.in: Compiler pdftex before pdfetex. Fixes to
distribution-creating code.
1999-02-06 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmp.h (calledit,blankrectangle,paintrow): These are now
declared in the web2c/coerce.h file.
* configure.in: Only configure xpdf dir if pdftex is selected.
* Makefile.in: Add rules for pdfetex.efmt and pdfelatex.efmt.
Correct typos. From Thomas and Sebastian.
1999-02-04 Olaf Weber <olaf@infovore.xs4all.nl>
* mft.ch: Fix for weaving from Simon Cozens <simon@brecon.co.uk>.
* config.h [!WIN32]: Remove define of __cdecl.
* bibtex.ch: Corrections from Oren Patashnik
<opbibtex@cs.stanford.edu>. Fix for weaving from Simon Cozens
<simon@brecon.co.uk>.
* Makefile.in: Changes for packaging to account for the extra texk
directory level. Different handling of formats to be able to cope
when the list is empty, as it is for teTeX.
1999-01-27 Olaf Weber <olaf@infovore.xs4all.nl>
* doc/web2c.texi: Correct typography of pdfTeX.
* texmfmp.h (getrandomseed): Add declaration.
* mp.ch (46.1307): Make init_randoms call get_random_seed. After
Fabrice.
* help.h: %&ini never worked, correct help strings.
* cpascal.h [WIN32]: Add pragma to quiet compiler. From Fabrice.
(aopenin): Open always in binary mode. From Fabrice.
(mainbody): Add TEXDLL, by Fabrice.
* config.h: Change inclusion guard from CONFIG_H to
WEB2C_CONFIG_H.
[WIN32]: Add definition of TEXDLL. From Fabrice.
* pktype.web: Updated version from Knuth, which had somehow been
overlooked for quite a while.
1999-01-26 Olaf Weber <olaf@infovore.xs4all.nl>
* share/typeface.map: Update from Karl.
* share/special.map: Update from Karl.
1999-01-24 Olaf Weber <olaf@infovore.xs4all.nl>
* share/*.tcx: New set of tcx files from Staszek Wawrykiewicz
<StaW@gust.org.pl>.
* withenable.ac: New option: --with-pdfetex.
* texmfmp.h: Support for pdfeTeX from Thomas Esser. pdftex.pool
is no longer a special case.
* tex.ch: Mention pdfeTeX in opening comment.
* help.h: Help string for pdfeTeX. From Thomas Esser.
* configure.in: Add support for pdfeTeX, from Thomas Esser.
* Makefile.in: Add support for pdfeTeX, from Thomas Esser.
* withenable.ac: Include the --with-mfw option.
* dvicopy.ch: Ensure that the --max-pages and --page-start options
actually work.
* configure.in: Introduce --with-mfw option, to be able to
generate window-capable MF as a separate executable called mfw.
* Makefile.in: Support for --with-mfw option.
1999-01-14 Olaf Weber <olaf@infovore.xs4all.nl>
* texmfmp.h: Prototypes from open_in_name_ok and open_out_name_ok.
* mp.ch, tex.ch, mf.ch: Replace open_name_ok with open_in_name_ok
and open_out_name_ok where appropriate.
* share/texfonts.map: Change softkey-???? to skey???.
* share/*.map: Update for fontname 2.2.
* share/*.tcx: New files: tables for tcx support.
1999-01-13 Olaf Weber <olaf@infovore.xs4all.nl>
* vftovp.ch: Since we may print the VPL on stdout, put all
terminal output on stderr. Add a newline if the VPL ends with the
BAD TFM OR VF comment.
* tftopl.ch: Since we may print the PL to stdout, all terminal
output should go to stderr.
* texmfmp.h: setupcharset is now used by all but Omega.
* tex.ch: Enable TCX files for TeX, clean up no-longer-current
comments. Based on code provided by Wlodzimierz Bzyl
<matwb@monika.univ.gda.pl>.
* mp.ch: Enable TCX files for MP. Based on code provided by
Wlodzimierz Bzyl <matwb@monika.univ.gda.pl>.
* mf.ch: Enable TCX files for MF. Based on code provided by
Wlodzimierz Bzyl <matwb@monika.univ.gda.pl>.
* cpascal.h: Remove NONASCII define. It was unconditional
already, and this cleans up some code.
* Makefile.in: Install tcx files, fix --output-comment test to
account for change of email address.
1999-01-10 Olaf Weber <olaf@infovore.xs4all.nl>
* share/special.map: Update for new lh fonts.
* doc/Makefile.in: Change of ../make/*.make to ../make/*.mk.
* withenable.ac: Remove checks for zlib and pnglib, improve
handling of --with-* options for MF.
* mp.ch [44.1238]: Prepare for tcx code by safeguarding PS output.
* configure.in: Special code to handle cross-compilation with
djgpp. Better handling of --with-x options. Changes for
reorganization of non-kpathsea library sources. C++ compiler
check for PDFTeX.
* bibtex.ch: Many fixes, as suggested by Oren Patashnik.
* Makefile.in: Change of ../make/*.make to ../make/*.mk. PDFTeX
related corrections from Thomas.
* dvitomp.ch [32]: Bugfix: local_only is indexed by internal
font numbers.
1999-01-05 Olaf Weber <olaf@infovore.xs4all.nl>
* dvtype.web: Update from Knuth.
* dvitype.ch: Minor change necessary to accomodate update.
* gftopk.web: Update from Knuth.
1998-12-04 Olaf Weber <olaf@infovore.xs4all.nl>
* vptovf.ch: Bugfix for 128 no longer required after update of
vptovf.web.
* tex.ch: Add strings_free configuration variable & checks. This
ensures the string pool is resized if necessary after load. Not
doing this caused core dumps in some cases. Bug reported by
Tobias Burnus <burnus@gmx.de>.
* configure.in: Configure in xpdf subdir for pdftex.
* Makefile.in: Add support for changes to to pdftex.
1998-10-11 Olaf Weber <olaf@infovore.xs4all.nl>
* README.HPUX: Removed because the changes to tex.ch made it
unnecessary.
* tex.ch [1.12], [8.110], [51.1332]: Change definition of
min_halfword and initialization of mem_bot to make the code more
portable. Remove a test that would now prevent extra_mem_bot
being used.
1998-07-26 Olaf Weber <olaf@infovore.xs4all.nl>
* bibtex.ch: Changes to get all information in the logfile when
the -terse option is used. With many thanks to Oren Patashnik
<opbibtex@cs.stanford.edu> for his assistance.
* vptovf.ch: Enlarged some constants, as suggested by Wayne
G. Sullivan <wgs@maths.ucd.ie>.
* vftovp.ch: Enlarged some constants, as suggested by Wayne
G. Sullivan <wgs@maths.ucd.ie>.
* tftopl.ch: Enlarged some constants, as suggested by Wayne
G. Sullivan <wgs@maths.ucd.ie>.
* pltotf.ch: Enlarged some constants, as suggested by Wayne
G. Sullivan <wgs@maths.ucd.ie>.
* mf.ch: Use open_name_ok to check names of files opened for
reading.
* mp.ch: Rename open_out_name_ok to open_name_ok, and use also to
check names of files opened for reading.
* tex.ch: Rename open_out_name_ok to open_name_ok, use it also to
check the names of files opened for reading.
* texmfmp.h: Rename openoutnameok to opennameok.
* tex.ch (49.1275): Include cur_name adjusting code from changes
to (29.537).
Sun May 31 17:12:14 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Corrected pdftex.a to libpdf.a, ozlib to zlib.
Change echoed message to refer to texklib.tar.gz instead of
texmflib.tar.gz.
* cpascal.h: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* tangle.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* mf.ch: Rename toint to intcast, because SCO usurped the former.
Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* mp.ch: Rename toint to intcast, because SCO usurped the former.
Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* pltotf.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* tex.ch: Rename toint to intcast, because SCO usurped the former.
Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
Correct the print_csnames function so that it doesn't print
entries in the hash table twice. Thanks to Berthold Horn for
pointing this out.
* gftodvi.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* dvitype.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* dvitomp.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* dvicopy.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* tftopl.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
* vftovp.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
Enlarge some contstants. Suggested by Wayne G. Sullivan
<wgs@maths.ucd.ie>.
* vptovf.ch: Rename toint to intcast, because SCO usurped the
former. Spotted by Jonathan Chen <jonc@pinnacle.co.nz>.
Correct a bug that led to invalid vf files being created in some
circumstances. From Wayne G. Sullivan <wgs@maths.ucd.ie>.
Fri Apr 24 21:36:09 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in, configure.in: Minor fixes in build rules of libpng,
zlib. From Thomas Esser.
Tue Mar 24 19:20:13 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* mp.web: New upstream source from John Hobby: version 0.641.
Tue Mar 3 14:16:57 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in (WEB2CVERSION): version 7.2.
Wed Feb 25 20:20:26 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Used `test ... -o test ...' which is always wrong,
changed `-o' to `||'. Spotted by Andreas Schott <ays@rzg.mpg.de>.
Fri Feb 20 17:14:33 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Tests moved over from withenable.ac.
* withenable.ac: Boilerplating, and move some tests to
configure.in, to make it possible to distinguish between default
settings and user choices.
* doc/install.texi: Update with --with-epsfwin switch.
Tue Feb 10 21:15:06 1998 Olaf Weber <infovore@xs4all.nl>
* withenable.ac: Add --with-epsfwin option. From Mathias
Herberts.
* doc/web2c.texi: Document epsf driver.
Fri Feb 6 17:56:53 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (pdftex.fmt, pdflatex.fmt): Do not require an .ini
file to exist.
Tue Feb 3 17:06:40 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (mltex.fmt, mllatex.fmt): Don't use .ini files.
* dvitomp.web: Incorporate a bug fix by John Hobby, as modified by
Peter Breitenlohner.
Sun Feb 1 15:50:06 1998 Olaf Weber <infovore@xs4all.nl>
* bibtex.ch: fptr -> f_ptr.
* dvitomp.web: Correct version number and date in printed title.
* mf.ch (49.1204): Remove trailing _ from inf_ and sup_ because
tangle doesn't like them.
* mp.ch (46.1298): Remove trailing _ from inf_ and sup_ because
tangle doesn't like them.
* mp.web: takescaled -> take_scaled.
* patgen.ch: readln -> read_ln; writeln -> write_ln.
* tangle.ch (8): Increase unambig_length to 32.
(58): Remove the conversion to uppercase, to match 63.
* tex.ch (51.1332): Remove trailing _ from inf_ and sup_ because
tangle doesn't like them.
* share/special.map: Version 2.7, from Karl Berry.
Fri Jan 30 21:17:07 1998 Olaf Weber <infovore@xs4all.nl>
* share/special.map: Update from Sebastian Rahtz
<s.rahtz@elsevier.co.uk>.
Thu Jan 29 16:08:10 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (tex-check): Use WEB2C instead of MKTEXSCRIPT.
* mp.ch, dvitomp.ch: Update for version 0.64.
* mp.web, dvitomp.web: Version 0.64, from John Hobby.
* triptrap/mtrap.0 triptrap/mtrap.1 triptrap/mtrap.log
triptrap/mtrap.mp triptrap/trap.148 triptrap/trap.149
triptrap/trap.150 triptrap/ triptrap/ triptrap/ triptrap/trap.151
triptrap/trap.197 triptrap/trap.200 triptrap/trap.5
triptrap/trap.6: New files from John Hobby.
Wed Jan 28 20:44:40 1998 Olaf Weber <infovore@xs4all.nl>
* dvitomp.ch: Version number 0.632a.
* dvitomp.web, dvitomp.ch: Version number set to 0.632a. Note
that the modifications are a stopgap, until John Hoppy releases an
updated version.
* tex.ch (50.1325): undump_upper_check_things was supplied with
the wrong upper limit.
* share/special.map: New version from Thomas Esser.
Fri Jan 23 15:03:49 1998 Olaf Weber <infovore@xs4all.nl>
* dvitomp.ch, dvitomp.web: Various fixes from Peter
Breitenlohner.
* mf.ch (48.1200): Four-digit years.
(49.1211): Make %& lines work reliably.
* mp.ch (45.1249): Four-digit years.
(46.1298): Make %& lines work reliably.
* tex.ch (50.1328): Use four-digit years.
(51.1337): Make %& lines work reliably.
* texmfmem.h: Changes for Omega, to make its dumps
endian-independent. After John Plaice.
Sat Jan 17 09:37:23 1998 Olaf Weber <infovore@xs4all.nl>
* wmftalk.h renamed to mftalk.h. From Mathias Herberts
<Mathias.Herberts@irisa.fr>
* withenable.ac: --with-mftalk defined NEXTWIN, not MFTALKWIN.
From Mathias Herberts <Mathias.Herberts@irisa.fr>
Wed Jan 14 21:23:56 1998 Olaf Weber <infovore@xs4all.nl>
* tex.ch: Added warning for the unwary on the advice of Peter
Breitenlohner. Comment fixes from Peter.
Tue Jan 13 08:31:52 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (dvitomp-check): Let DVItoMP look in ./tests for
ptmr.vf.
* dvitomp.ch ([65] l.1152): Correct a bug in dvitomp.web, that
prevents the font name from being printed as part of the error
message.
* Makefile.in (check-tex): Correction of typo, set TMPDIR to ..,
so that the PATH settings continue to work when the target is used
from the source directory. From Eli Zaretskii.
Fri Jan 9 21:13:39 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Many changes, related to putting omegaware files in
omegaware directory.
(all, default): Make manual pages.
Sun Jan 4 16:00:54 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Change for manual pages.
Thu Jan 1 15:52:39 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Add an all-dist target (maintainer only) and change
the names of the etex, omega, and pdftex tarballs.
Tue Dec 30 17:49:51 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (etex.efmt, elatex.efmt): Expand contents of
{etex,elatex}.ini files.
(check-pooltype): In e-TeX compatibility mode there's no tex.pool, but
an etex.pool. Both after Peter Breitenlohner.
* Makefile.in: Add man directory to targets. Correct PATH setting
for the nonesuch test in check-tex.
* configure.in: Added man/Makefile to AC_OUTPUT.
Thu Dec 18 20:37:48 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (check-tex): Make the nonesuch test work when we
haven't installed the scripts yet.
* doc/web2c.texi: Correction of -maketex -> -mktex, and a few
others.
* help.h: Change spelling of -maketex option to -mktex.
Tue Dec 16 19:11:05 1997 Olaf Weber <infovore@xs4all.nl>
* PROJECTS: Add info on overflow bug.
* help.h: Reformatted text for IPC-related switches.
Sat Dec 13 23:03:46 1997 Olaf Weber <infovore@xs4all.nl>
* texmfmp.h [TeX]: Add definitions for flushdvi.
* tex.ch ([32.640] l.12690): Somewhat cleaner code for the IPC
fflushes.
Fri Dec 12 10:25:43 1997 Olaf Weber <infovore@xs4all.nl>
* help.h: Correct some messages for the change of MakeTeX to
mktex.
* tex.ch ([32.640] l.12690): Add fflush(dvi_file) in two places of
the IPC code; the buffering caused problems. After Gregor
Hoffleit & Richard Hutchinson.
* weave.ch: Increase max_bytes, so that we can weave Omega.
* doc/web2c.texi: Updated for changes to shell_enabled and
openout_any variables.
Wed Dec 3 17:38:53 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (install-fmts): The choice is between @TEX@ and
@CTEX@, not @TEX@ and @ETEX@.
Tue Dec 2 12:57:17 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (extraclean): Be more thorough.
* Makefile.in (mf.base, mpost.mem): Use --base=mf, --mem=mpost
option.
Mon Dec 1 19:07:00 1997 Olaf Weber <infovore@xs4all.nl>
* doc/web2c.texi: Update for -interaction option.
* mfmpw32.c: New file from Fabrice Popineau.
* help.h: Updated for the --interaction option.
* mf.ch (6.68, 6.69, 48.1199): Add support for --interaction
option.
* mp.ch (6.83, 6.84, 45.1293): Support for --interaction option.
* tex.ch (6.73, 6,74, 50.1327): Support for the --interaction
option.
* Makefile.in (install-links): Links are cheap on UNIX, so install
links for all kinds of *ini* and *vir*.
Sun Nov 30 13:32:25 1997 Olaf Weber <infovore@xs4all.nl>
* withenable.ac: Change --with-maketextex to --with-mktextex as a
consequence of the great renaming.
Sat Nov 29 13:07:49 1997 Olaf Weber <infovore@xs4all.nl>
* tex.ch (29.530): Assume empty suffix means TeX input file.
(29.537): Don't strip ".tex" suffix, don't give ".tex" suffix to
prompt_file_name.
(29.537) [Init]: New rules for determining dump file name.
* mp.ch (35.770) [init]: Implement new rule for determining name
of dump file.
* mf.ch (38.793) [init]: Implement new rules to determine name of
dump file.
* Makefile.in (*.{fmt,emft,base,mem}): Changes for new name
generation rules for formats.
* Makefile.in (*-check): Changes for checking outside the source
dir.
(*-dist): Add versions of the added packages to the names of their
tarballs.
* configure.in: Create stamp-auto. From Peter Breitenlohner.
Tue Nov 25 18:29:47 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Conditionalize tex-check, include etex-check.
From Peter Breitenlohner.
Mon Nov 24 17:26:40 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Changes to let make check work outside the source
tree.
* configure.in: Create a tests subdirectory if necessary.
Sat Nov 22 19:27:47 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Change ?w2c-$(version).tar.gz names to
?web2c-$(version).tar.gz in the etex-dist, omega-dist, pdftex-dist
targets.
* README: Add references to etexdir/README, omegadir/README, and
pdftexdir/README.
* doc/web2c.texi: Minor updates.
Fri Nov 21 15:22:53 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Add a tex2.c/tex2.o file to tex_c/tex_o.
Wed Nov 19 17:13:31 1997 Olaf Weber <infovore@xs4all.nl>
* share/skey1250.map, share/skey1555.map, share/texfonts.map: Name
change of softkey-*.map to skey*.map.
* Makefile.in: Definition of LN_S removed, it is included from
common.make.
Explicit rules for tangling e-TeX and PDFTeX. Corrected the rule
for tangling Omega.
(dist): Ensure the fontname *.map files are included.
(gftopk-check, pktogf-check, pktype-check): cmr10.600pk is renamed to
cmr10.pk.
(depend): Make depend in $(otps) as well.
* texmfmp.h [NeXT]: More compile-time endianness tests.
* withenable.ac: Change formatting of help text to make it line up
better.
Sun Nov 16 11:41:08 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in (install-links): Add "" to prevent syntax errors.
Sat Nov 15 21:33:28 1997 Olaf Weber <infovore@xs4all.nl>
* withenable.ac: Add an --with-omega option, so that omega can be
selectively disabled if so desired.
* texmfmp.h: Definition of Xchr removed. Additions for Omega.
The added definitions for PDFTeX now come from an external file.
* help.h: Help messages for e-TeX, PDFTeX, and Omega and friends.
Since these messages are highly web2c-specific, and unlikely to
change much, there seems to be little reason to move them to
external files.
* cpascal.h: Put definition of Xchr in this file, because Omega
likes it. Also other additions to support Omega.
* configure.in: Add support for conditionally using Omega.
* Makefile.in: Many changes to support building Omega.
Fri Nov 14 16:39:32 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Add very primitive kludge for the creation of
matching e-TeX and PDFTeX distributions.
* Makefile.in (web-dist): Remove etex.web and pdftex.web for the
web-distribution.
* Makefile.in (dist): Include tiedir in distribution.
* Add tie-2.4 to the distribution. It lives in web2c/tiedir.
* texmfmp.h [eTeX]: TEXPOOLNAME changes; [PDFTeX]: define
PDFTEXPOOLNAME.
* help.h: Include a help header for e-TeX and PDFTeX.
* Makefile.in: Changes to accomodate e-TeX and PDFTeX.
* configure.in: Change @ETEXTEX@ to @CTEX@.
* withenable.ac: Add --with-pdftex, --with-etex,
--with-system-zlib, and --with-system-pnglib options.
* configure.in: Add support for pdfTeX and e-TeX related options.
Thu Nov 13 23:49:10 1997 Olaf Weber <infovore@xs4all.nl>
* texmfmp.h: Include code to test for endianess when compiling.
When the BYTE_ORDER macros are available, this improves the
ability to cross-compile.
Mon Nov 10 13:15:21 1997 Olaf Weber <infovore@xs4all.nl>
* configure.in (WEB2CVERSION): Version 7.1.
Thu Nov 6 20:29:35 1997 Olaf Weber <infovore@xs4all.nl>
* triptrap/texmf.cnf: Bumped pool_size from 32000 to 40000.
* mf.ch: Bump max_font_dimen from 50 to 60.
* bibtex.ch: Bump buf_size and glob_str_size from 3000 to 5000.
Tue Nov 4 19:11:59 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Get rid of CVS dir.
Wed Oct 29 11:43:30 1997 Olaf Weber <infovore@xs4all.nl>
* withenable.ac: Correction: dump-noshare -> dump-share.
* configure.in: Do not include ../kpathsea/xt.ac at the top,
because that puts the tests for X before the defaults that
withenable.ac sets up.
* withenable.ac: Include ../kpathsea/xt.ac here.
* withenable.ac: Add quotes to make --with-editor='vim +%d %s'
work, rather than require --with-editor='"vim +%d %s"'.
Tue Oct 28 21:35:37 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Use cp -p when creating a distribution.
Mon Oct 27 16:22:54 1997 Olaf Weber <infovore@xs4all.nl>
* withenable.ac: sinclude(../kpathsea/xt.ac) and
sinclude(kpathsea/xt.ac) are apparently superfluous.
Tue Oct 21 23:35:47 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Somewhat saner handling of triptrap dir when
creating a distribution.
Mon Oct 20 08:05:31 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Replace y.tab with y_tab.
* doc/ref.bib: Preserve capitalisation in titles.
* cpascal.h: Undef `read' if it is already defined, before
defining it. Don't set console device to binary on WIN32. From
Fabrice Popineau.
* config.h [WIN32]: Add WIN32WIN define. From Fabrice Popineau.
Fri Oct 17 10:37:38 1997 Olaf Weber <infovore@xs4all.nl>
* cpascal.h [__DJGPP__]: Set stdin/stdout to binary, but not if
they are the console device. From Eli Zaretskii
<eliz@is.elta.co.il>.
Thu Oct 16 20:39:27 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Add target depend:: to remake dependencies in
subdirectories.
* Makefile.in (tex_c, tex_o): After the last changes to tex.ch, we
no longer have a tex2.c.
* tex.ch: Replace 'xlparen' by '@=(@>' and 'xrparen' by '@=)@>'.
Compare ./web2c/cvttex.sed: Obsolete file. Also, various changes
for e-TeX (small rearrangements, introduces Init..Tini, remove
tabs and trailing blanks). From Peter Breitenlohner
<peb@mppmu.mpg.de>.
* doc/web2c.texi: Remove documentation of -extend-jobname option.
* help.h [TeX] Remove description of -extend-jobname option.
* mp.ch: Get mpost to handle filenames with multiple dots better.
* mf.ch: Get mf to handle filenames with multiple dots better.
* tex.ch: Numerous changes to remove the extend-jobname stuff, and
replace it with a sane handling of filenames with more than one
dot. See especially end_name and start_input.
Wed Oct 15 17:37:07 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in ($(proglib)): Added stamp-auto to the dependencies.
Sun Oct 12 11:50:58 1997 Olaf Weber <infovore@xs4all.nl>
* tex.ch [53.1374]: Check name of file before opening it, not
afterwards.
* mp.ch [35.783]: Check name of file with open_out_name_ok before
trying to open it for writing instead of afterwards.
Fri Oct 3 11:10:15 1997 Olaf Weber <infovore@xs4all.nl>
* tangle.ch ([64] Delayed pool file opening.): Use
basename_change_suffix to obtain a reasonable name for the pool
file.
* vptovf.ch (6 Open VPL file): Print version_string instead of
repeating the banner.
* doc/web2c.texi: Correct description of -extend-jobname option.
* help.h [TEXHELP]: Correct description of -extend-jobname option.
* tex.ch (29.517): Changed logic to fix extend-jobname=never
problem.
Thu Oct 2 18:06:11 1997 Olaf Weber <infovore@xs4all.nl>
* doc/web2c.texi: Some minor corrections, suggested by "Tomasz
J. Cholewo" <tjchol01@mecca.spd.louisville.edu>.
* tex.ch: A patch to allow printing of non-ascii characters. From
Bernd Raichle <raichle@informatik.uni-stuttgart.de>.
Wed Oct 1 23:29:54 1997 Olaf Weber <infovore@xs4all.nl>
* configure.in: Fix for faulty link window/x11.c.
Tue Sep 30 11:15:35 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Corrected path to rename.
* Makefile.in (version_files): removed.
* configure.in: Added definitions of WEB2CVERSION.
* Makefile.in: Let version = @WEB2CVERSION@.
* doc/Makefile.in: Use the add-info-toc script for the top level.
* tangle.ch: Increase max_toks from 50000 to 60000, max_names from
4000 to 6000
(was 5000).
* c-auto.h.in (YYTEXT_UCHAR): added to solve the unsigned char
yytext[] bug. (From Thomas Esser <te@informatik.uni-hannover.de>)
Sat Apr 19 16:11:24 1997 Karl Berry <karl@cs.umb.edu>
* tex.ch: Add .latex and .ini as another special case.
From: Henk Vosmeijer <vosmeijer@nfra.nl> and te.
Fri Mar 21 16:45:28 1997 Karl Berry <karl@cs.umb.edu>
* Makefile.in (tex.fmt, latex.fmt, mf.base, mpost.mem): Include
$(makeargs) when calling prereq-check so that any path
changes (e.g., $(prefix)) get propagated.
Bug from: jumper@lens.sri.com (Greg Jumper), among others.
Mon Feb 24 17:02:14 1997 Karl Berry <karl@cs.umb.edu>
* vptovf.ch (max_kerns, hash_size, max_lig_steps): Increase
for psfonts.
From: Sebastian Rahtz <s.rahtz@elsevier.co.uk>.
Thu Feb 6 11:27:23 1997 Karl Berry <karl@cs.umb.edu>
* Version 7.0.
* tftopl.ch (tfm_size, lig_size, hash_size): Increase to match vptovf.
From Richard.
* vptovf.ch (max_kerns): Increase to 10007, a prime > 10000.
From Richard.
* tex.ch: Oops, .drv should be .drv, not .dtx!
From Fabrice and Thomas.
* Makefile.in (default): Depend on info. From Tim.
Tue Feb 4 14:16:19 1997 Karl Berry <karl@cs.umb.edu>
* triptrap/mptrapin.log: Missed updating this.
Mon Feb 3 17:11:45 1997 Karl Berry <karl@cs.umb.edu>
* Makefile.in (windowlink): Forgot to include $(x_tool_libs).
Sat Feb 1 17:17:19 1997 Karl Berry <karl@cs.umb.edu>
* Makefile.in (x_ext_lib): New variable.
(windowlink): Use it.
* configure.in: Fix test for -lXext to include $X_EXTRA_LIBS
(needed on Solaris at least). Introduce $x_tool_libs variable
for toolkit libraries -lXt -lXext, only leave -lX11 in $wlibs.
From Ulrik.
* tex.ch: Make main_memory changes more robust.
Change ssup_max_strings and ssup_hyph_size to 65535.
From Wayne.
Fri Jan 31 17:57:14 1997 Karl Berry <karl@cs.umb.edu>
* tex.ch: Make .drv a special case.
Mon Jan 27 22:34:18 1997 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* dvitomp.web, mp.web: New files (version 0.632) from John Hobby.
* dvitomp.ch, mp.ch: Minor update to reflect changes in WEB files.
* triptrap: Need to update master files for mptrap test.
Fri Jan 17 16:56:37 1997 Karl Berry <karl@cs.umb.edu>
* Makefile.in (post-dist): Ungnuify doc/Makefile.in.
Wed Jan 15 22:40:11 1997 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* mp.ch: : Allow tabs as field seperators in psfonts.map.
Thu Jan 16 09:58:24 1997 Karl Berry <karl@cs.umb.edu>
* Makefile.in (socketlibs): New variable.
(tex): Include it in the link.
* withenable.ac (--enable-ipc): Check for -lsocket.
Needed on Solaris, at least.
From: Richard Walker <Richard.Walker@cs.anu.edu.au>.
* tex.ch (ssup_trie_opcode, ssup_trie_size): Change to 65535.
Fri Jan 3 09:02:34 1997 Karl Berry <karl@cs.umb.edu>
* tex.ch (trie_op_size, neg_trie_op_size): Change to 1501.
From Braams.
Sun Dec 15 16:50:39 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch: ifdef-out the TCX file stuff.
Mon Dec 9 00:50:56 1996 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* bibtex.ch, dvicopy.ch, dvitype.ch: Make messages consistent
if called with no arguments.
Sun Dec 8 16:32:50 1996 Karl Berry <karl@cs.umb.edu>
* bibtex.ch (standard_input, standard_output): Make globals here.
Initialize in main program.
* cpascal.h (makebinaryfile) [WIN32]: Define.
(resetbin, rewritebin): New macros.
(FOPENRBINMODE): Define.
(standardinput, standardoutput): Remove, these are in bibtex.ch now.
* config.h (unlink) [!unlink]: Add condition.
* dvicopy.ch, dvitomp.ch, dvitype.ch, gftodvi.ch, gftopk.ch,
mp.ch, pktogf.ch, pltotf.ch, vftovp.ch, vptovf.ch: Distinguish
between text and binary files, sigh.
From Fabrice.
Fri Dec 6 17:44:15 1996 Karl Berry <karl@cs.umb.edu>
* texmfmem.h: Add conditionals and comments for Omega.
* texmfmp.h ({ocp,ofm}openin): New macros.
Tue Dec 3 14:56:54 1996 Karl Berry <karl@cs.umb.edu>
* texmfmp.h (ipcpage) [IPC]: Give correct prototype.
From: Gregor Hoffleit <flight@mathi.uni-heidelberg.de>.
Sun Dec 1 11:56:39 1996 Karl Berry <karl@cs.umb.edu>
* bibtex.ch (max_glob_strs): Increase to 20 for indxcite.
Tue Dec 3 13:44:28 1996 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* Makefile.in (mostlyclean): Call $(MAKE) $@, not $(MAKE) $$target.
Tue Dec 3 01:45:33 1996 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* triptrap/texmf.cnf: Correct max_strings.mpost.
* dvitomp.ch: Duplicate banner line for use in print_version.
Wed Nov 27 09:55:04 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (distclean): Don't remove tangleboot.p.
(all_subdirs): Add doc, so it gets cleaned.
Tue Nov 26 11:57:25 1996 Karl Berry <karl@cs.umb.edu>
* configure.in: If --with-x-toolkit is set, set with_x.
Also protect --with tests from (unusual) values starting with -.
* Makefile.in (install_makeargs): Remove INSTALL_LIBTOOL_PROGRAM
again, there's no way to pass it down since its value is
subdirectory-relative.
(mft-check): Use $(srcdir)/.. instead of ../$(srcdir).
(mpost-check): Set MAKEMPX_BINDIR so we get the distribution's
tex, newer, etc., not anything installed
Mon Nov 25 15:04:40 1996 Karl Berry <karl@cs.umb.edu>
* configure.in: Only set with_x=no if it hasn't already been set.
Fri Nov 22 17:17:03 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (mpost-check): Run tests/mptest.
* tests/mptest.mp: New file from Ulrik to test various bugs.
* mp.ch: Fix from John Hobby to allow invalid big number inside
btex..etex. Will probably appear in the next mp.web.
Sun Nov 10 16:02:08 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-data): Install from doc, too.
Install mp.pool, not mpost.pool.
Call mkdirchain.
From Ulrik.
* configure.in: Do X testing here,
* withenable.ac: Instead of here; sinclude ../kpathsea/xt.ac instead.
* withenable.ac (maketextex-default): Test $withval, not $enableval.
From: Gerd Neugebauer <gerd@mailhost.uni-koblenz.de>.
Thu Oct 31 19:27:56 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (texinfo.fmt): Simplify dump rule for recent Texinfo's.
From: Stephen Gildea <gildea@intouchsys.com>.
Sun Oct 27 05:15:03 1996 Karl Berry <karl@cs.umb.edu>
* patgen.web: New version from peb to avoid division by zero.
* patgen.ch: Remove my hack that did this.
Fri Oct 25 15:11:43 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in: Include doc stuff in distribution.
Thu Oct 24 12:56:47 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in: Rename the mp binary to mpost, because there is a
Sun OpenWindows program by that name, plus a sort-of-freeware
version thereof. Sigh, sigh, sigh. Reported by Thomas.
Wed Oct 23 17:19:29 1996 Karl Berry <karl@cs.umb.edu>
* help.h: Extra blank line in vftovp's help.
* patgen.ch: Avoid division by zero when printing the efficiency.
Tue Oct 22 13:14:26 1996 Karl Berry <karl@cs.umb.edu>
* triptrap/texmf.cnf (MPXCOMMAND): Turn off with 0,
not none, which feature I guess I removed from callmakempx
at some point.
* Makefile.in (default, all): Depend on formats, not
$(fmts) $(bases) $(mems). We weren't remaking the formats.
* Makefile.in (trip, trap, mptrap): @echo to stderr, no use
redirecting it to the file we tell them to look at.
* mf.ch: Initialize char_class[255]; somehow the loop was changed
to stop at 254?!
* triptrap/texmf.cnf: Oops, can't have comments on the same line
as variable definitions.
Sun Oct 20 18:00:16 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (mpware_sources): New variable.
($(mpware)): New target, replacing mpware.
(always): No longer needed.
Tue Oct 15 17:23:40 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (version_files): Add mpto.c and newer.c in mpware/.
Mon Oct 14 11:09:28 1996 Karl Berry <karl@cs.umb.edu>
* cpascal.h (makebinaryfile) [!WIN32]: Define as a no-op.
* dvicopy.ch: Have to change stdin/stdout to be ``binary'' files.
* config.h (DllImport) [_WIN32]: Define.
* Changes for NT from: Fabrice POPINEAU <popineau@esemetz.ese-metz.fr>.
* weave.ch (max_toks, max_texts),
* tangle.ch (max_texts): Increase for tex2pdf.
Sun Oct 13 16:54:11 1996 Karl Berry <karl@cs.umb.edu>
* patgen.ch: Patch the new call to get_input.
* dvicopy.web: Update (just a doc change) from peb.
* patgen.web: Update to version 2.2 from peb.
* tests: Rename directory from check/, for the sake of Gnits.
Tue Oct 8 16:10:31 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (lib_sources): Add printversion.c.
(version_files): Add makempx.in.
Mon Oct 7 17:12:03 1996 Karl Berry <karl@cs.umb.edu>
* *.ch: Oops, turns out printversionandexit needs more arguments.
* cpascal.h: Change decl.
Sun Oct 6 18:02:27 1996 Karl Berry <karl@cs.umb.edu>
* cpascal.h (kpathseaversionstring): Remove this.
(printversionandexit): Declare this.
*.ch: Call the latter with the program banner.
Sun Sep 8 19:14:09 1996 Karl Berry <karl@cs.umb.edu>
* mp.ch: Fix help message reference to MPtoTeX.
Sat Sep 7 17:34:36 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (default all): Make $(fmts) $(bases) $(mems) by default.
Fri Sep 6 15:03:35 1996 Karl Berry <karl@cs.umb.edu>
* configure.in: Call AC_PROG_RANLIB.
Wed Aug 14 16:31:42 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch: Make .ins a ``known'' extension, too.
Sun Aug 4 15:51:41 1996 Karl Berry <karl@cs.umb.edu>
* cpascal.h (kpathseaversionstring): Need to restore _'s.
* *.ch: print_ln (kpathsea_version_string) with --version.
Fri Jul 26 15:47:35 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in: Remove co.make.
Wed Jul 24 10:24:37 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (dist_subdirs, all_subdirs): Remove man.
Sat Jun 8 13:15:40 1996 K. Berry <kb@cs.umb.edu>
* Makefile.in: Use $(kpathsea_link) instead of $(link_command).
Sat Jun 1 13:12:44 1996 Karl Berry <karl@cs.umb.edu>
* texmfmp.h (openoutnameok): Move outside of #ifdef TeX conditional.
Mon May 27 13:27:38 1996 Karl Berry <karl@cs.umb.edu>
* config.h: Use #if __STDC__, not #ifdef.
Sat May 25 15:30:52 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch: Doc fix.
Fri May 24 11:12:07 1996 Karl Berry <karl@cs.umb.edu>
* help.h (TEXHELP): Document -extend-jobname.
* tex.ch: Implement it.
* dvitype.ch (name_size): Increase to 1000. We should dynamically
allocate all these arrays, but it doesn't seem worth the trouble
to delay the release even more.
Thu May 23 16:53:38 1996 Karl Berry <karl@cs.umb.edu>
* bibtex.ch: Dynamically (re)allocate the wiz_fn_space array
wiz_functions, as Nelson has reached the limit.
Mon May 13 17:27:23 1996 Karl Berry <karl@cs.umb.edu>
* *.ch: Include program name in `need <however many> arguments' error.
Mon May 6 14:42:09 1996 Karl Berry <karl@cs.umb.edu>
* dvitype.ch: Doc fixes.
Fri May 3 17:34:29 1996 Karl Berry <karl@cs.umb.edu>
* withenable.ac: Use AC_ARG_WITH instead of AC_ARG_ENABLE for
maketextex-default.
Turn off MakeTeXTeX by default, as intended.
Remove maketexmf-default -- that is in kpathsea now.
Thu May 2 14:14:38 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (dist_subdirs): Add contrib, rename data to share.
* kpathsea.make (c_auto_h_dir): Restore this.
Mon Apr 29 16:09:10 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in ({tex,mp,mf}.pool): Add these targets along with the
.p's, since they get made at the same time. We never depend on them.
Sun Apr 28 15:06:15 1996 Karl Berry <karl@cs.umb.edu>
* configure.in (pb_AC_ASM_UNDERSCORE): Add call to new routine.
From: Peter Breitenlohner <peb@MPPMU.MPG.DE>.
Sat Apr 27 17:11:00 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch: Add changes from Wayne for dynamically allocated number
of hyphenation exceptions.
Mon Apr 22 11:47:17 1996 Karl Berry <karl@cs.umb.edu>
* pktogf.ch: Correct call to kpse_open_file.
Sun Apr 21 17:27:02 1996 Karl Berry <karl@cs.umb.edu>
* help.h (MFHELP, TEXHELP): Document [-no]-maketex.
Wed Mar 13 15:43:00 1996 Karl Berry <karl@cs.umb.edu>
* configure.in (AC_OUTPUT): Add doc/Makefile.
Tue Mar 12 15:27:37 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch (hyph_size): Increase to 1009.
Sun Mar 10 15:56:35 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch (\openout): Don't log if the log file isn't open yet.
* bibtex.ch (glob_str_size): Increase to buf_size. Suggested by Ulrik.
Could dynamically allocate it (and global_strs, etc.), a la
entry_strs, but time is fleeting.
Fri Feb 23 11:23:27 1996 Karl Berry <karl@cs.umb.edu>
* bibtex.ch: Doc fix.
Sun Feb 18 16:18:54 1996 Karl Berry <karl@cs.umb.edu>
* (most).ch: Change xopenfile calls to kpse_find_file.
Sat Feb 17 15:22:59 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch (\openout): Log what we open, and disallow some filenames.
* texmfmp.h (openoutnameok): Declare this.
Fri Feb 16 17:55:12 1996 Karl Berry <karl@cs.umb.edu>
* texmfmp.h (NONASCII): Define this.
Thu Feb 15 14:11:58 1996 Karl Berry <karl@cs.umb.edu>
* tex.ch: Set kpse_make_tex_discard_errors if interaction = batchmode.
* mf.ch, mp.ch: Likewise.
* Makefile.in (tex-check): Include check that this works.
* texmfmp.h: Include <kpathsea/tex-make.h>.
* cpascal.h (kpsemaketexdiscarderrors): New macro.
* data: Rename to `share'.
* Makefile.in: Uses changed.
Wed Feb 14 11:25:03 1996 Karl Berry <karl@cs.umb.edu>
* mf.ch, mp.ch: Incorporate patches for length of single-character
unprintable strings, per message to tex-implementors.
From: vieth@thphy.uni-duesseldorf.de (Ulrik Vieth).
Date: Wed, 20 Dec 1995 13:43:52 +0100.
Sat Feb 10 15:17:45 1996 Karl Berry <karl@cs.umb.edu>
* mf.ch: Use halfp where possible (from Andreas Scherer).
* tex.ch: Add copyright clarification (from bernd).
* help.h ({TEX,MF,MP}HELP): -program is really -progname.
* tex.ch, mf.ch, mp.ch: Remove word `default' in ``Can't find the
default ___ foo.''
Fri Feb 9 15:46:31 1996 Karl Berry <karl@cs.umb.edu>
* withenable.ac: --with-maketexpk etc. moved to
kpathsea/withenable.ac.
Sat Feb 3 15:45:15 1996 Karl Berry <karl@cs.umb.edu>
* Makefile.in (DEFS): Move to common.make.
Sun Dec 31 16:46:23 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (kpsefindmft): Add to underscore-less list.
Fri Dec 29 17:17:02 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in: misc.make is now clean.make.
Tue Dec 26 15:04:10 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (program_files): Add *.ac.
* withenable.ac: New file.
* configure.in (maketex*): Fix doc strings.
Mon Dec 18 11:29:44 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (programs): New target.
Sun Dec 17 15:10:09 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Add support for dumping interesting parts of the .fmt
file, to aid in debugging latex, etc. Suggested by David Carlisle.
Tue Dec 12 15:57:15 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-links): Make dependency of install-exec,
rather than install-data.
(install-exec): Install the pool files as well.
From Ulrik.
* mf.ch, mp.ch: Module number corrections, etc., from Ulrik.
Mon Dec 11 12:59:16 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (tex-check): Add run of Bernd's mltextst.tex, and
add that file to check/.
* weave.ch: Remove bogus increment of optind that prevented
recognition of the change file.
Sun Dec 10 14:58:38 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (post-dist): Include tangleboot.p.
* mf.ch: Back to disallowing 8-bit characters.
* mp.ch: Disallow in general, but allow when |tex_flushing|.
From Ulrik.
* Makefile.in (check/check.log): New target.
(pre-dist): Depend on it.
* mft.ch: Use kpse_find_mft.
* Makefile.in (triptrap): Rename from mptriptrap. From Ulrik.
* triptrap/texmf.cnf: Remove pool_size.mp, since it was being
treated as 32000 anyway. From Ulrik.
* cpascal.h: Doc fix, from a comment by Andreas S.
* Makefile.in (install-man): New target, dependency of
install-data.
(install-links): Don't install tex as a link, it's the binary.
From: Joern Clausen <joern@techfak.uni-bielefeld.de> (among others).
Sat Dec 9 20:26:51 1995 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* cpascal.h (kpsemftformat): Add this for MFT style files.
Sun Dec 3 13:42:33 1995 Karl Berry <karl@cs.umb.edu>
* mp.ch: Make character 255 invalid here, too.
Allow input filenames like `one.two.mp'.
* tex.ch: .dtx is another special case for TeX input.
Fri Dec 1 16:15:32 1995 Karl Berry <karl@cs.umb.edu>
* mf.ch, mp.ch, mft.ch: Patches from Ulrik to allow 8-bit
input. (Although bugs remain.)
Mon Nov 27 11:10:53 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-links): Install mltex as a link to virtex.
Sun Nov 26 13:40:01 1995 Karl Berry <karl@cs.umb.edu>
* help.h (TEXHELP): Document -mltex.
Fri Nov 24 13:16:13 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-data): Avoid use of basename here.
Thu Nov 23 15:20:24 1995 Karl Berry <karl@cs.umb.edu>
* dvicopy.web, dvicopy.ch: Update for version 1.5.
Wed Nov 22 13:04:50 1995 Karl Berry <karl@cs.umb.edu>
* mft.ch: Treat tab and form feed like spaces on input.
* {weave,tangle,mft,patgen,vptovf,pltotf}.ch: Increase input line
length limit to 3000. From Ulrik.
Sun Nov 19 16:05:06 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (program_files): Remove tangleboot.p.
(dist): Don't include various files in check/.
(distclean): Remove tangleboot.
(clean): Remove *.fmt, etc.
From John I.
Sat Nov 18 17:05:37 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (distclean): Remove *extra.c. From Peter Dyballa.
* tex.ch: String recycling changes from Bernd.
Fri Nov 17 13:22:31 1995 Karl Berry <karl@cs.umb.edu>
* mp.ch (open_write_file): Needs modification for Amiga. From
Andreas S.
* gftodvi.ch (start_gf): Initialize arg_buf_ptr. From Andreas S.
* help.h (TEXHELP, MFHELP, MPHELP): Document new option -program.
* tangle.ch, weave.ch: Correct logic for finding chg_name. From
Ulrik and Andreas S.
* cpascal.h (libcfree): Use this name instead of cfree, which
historically exists on some systems.
* tex.ch, mf.ch, mp.ch: Change the calls.
* dvitomp.ch, gftodvi.ch: abs => fabs. From Ulrik.
Thu Nov 16 16:18:11 1995 Karl Berry <karl@cs.umb.edu>
* weave.ch, vptovf.ch, tangle.ch, pltotf.ch, patgen.ch: Call
kpse_set_progname. From Gregor Hoffleit.
* Makefile.in (install-exec): make install-exec in mpware.
(clean): Remove junk from mptriptrap.
(install-links, install-fmts, etc.): Various fixes.
From Ulrik.
* config.h (AMIGAWIN) [AMIGA]: Define this. From Andreas Scherer.
Sun Nov 12 16:05:44 1995 Karl Berry <karl@cs.umb.edu>
* gftype.ch (parse_arguments): Had <> -1 instead of = -1 when
checking the getopt_return_val.
* mf.ch, mp.ch (ab_vs_cd): Remove assembler possibility for this,
since it's not an inner loop function. From Wayne.
* mp.ch: Allow more comment characters in psfonts.map.
Make all error messages use `psfonts.map' consistently. From Ulrik.
* help.h (TEXHELP): -shell-escape instead of -noshell. Alphabetize
all (excepting -help/-version).
* tex.ch: Adding logging of system, disable by default, convert to
external character set. Suggested by Bernd, Nelson, et al.
* Makefile.in (dvitomp-check): Use ./dvitomp.
Mon Oct 30 17:04:19 1995 Karl Berry <karl@cs.umb.edu>
* help.h (MPHELP): Corrections from John Hobby.
Sun Oct 22 16:47:23 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (mems, bases, fmts, formats, mptriptrap): New
targets. Reported by Ulrik.
(web2c, .ch.p, tangle.p): Use $(shared_env). From Simon.
(tex.fmt, latex.fmt): Missing \ before \input. Reported by Tim.
(install-links): Install vir* links as well as ini*. Reported by Tim.
Sat Oct 7 17:48:43 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-links): Also depend on install-mems. From Ulrik.
Fri Oct 6 16:26:13 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in: Use ./<program> instead of just <program>, in the
*-check targets and trip. From Wayne.
* help.h ({TEX,MF,MP}HELP: Document %&ini.
Mon Oct 2 15:55:57 1995 Karl Berry <karl@cs.umb.edu>
* pooltype.ch: Call kpse_set_progname.
Sat Sep 30 15:06:57 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Add \write18 and -output-comment support.
* help.h (TEX_HELP): Document the options.
Sat Sep 23 15:05:06 1995 Karl Berry <karl@cs.umb.edu>
* configure.in (strtol): Move this test to kpathsea, since we
can only use it once.
Wed Sep 20 16:22:54 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Chop off an extension of .ltx, .texi, or .texinfo after
all, when making the jobname.
Sun Sep 17 11:48:34 1995 Karl Berry <karl@cs.umb.edu>
* configure.in: Enable MakeTeXMF and MakeTeXTFM by default.
Sat Sep 9 16:26:01 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-data): Install the *.map files.
(dist): Put the .tcx and .map files in a subdir `data'.
Thu Sep 7 12:43:02 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (lib_sources): Remove xopenfile.c.
Mon Sep 4 17:15:43 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (xopenfile): Moved to kpathsea.
Fri Sep 1 17:43:05 1995 Karl Berry <karl@cs.umb.edu>
* configure.in: Doc fix.
* texmfmem.h: Doc fix.
Thu Aug 31 13:36:09 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (odd): Maybe x & 1 is better than x % 2.
(half, halfp, roundscaled, roundfraction, floorscaled,
floorunscaled): Define these.
* mf.ch, mp.ch (ab_vs_cd) [ASM_SCALED_FRACTION]: ifdef this, and
use the routines above.
* configure.in: If Linux, set and substitute for @system_optimize@.
Wed Aug 30 16:30:56 1995 Karl Berry <karl@cs.umb.edu>
* texmfmem.h: Remove junkx and junky in LittleEndian case.
Reported by Wayne.
* config.h (NO_DUMP_SHARE): Renamed from NO_FMTBASE_SWAP.
Fri Aug 25 13:21:31 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (prereq-lose, tex.fmt, latex.fmt, mp.mem, etc.): New
targets, mostly copied from the old Makefiles. Run kpsewhich to
make sure the input files are there first.
Thu Aug 24 19:13:02 1995 Karl Berry <karl@cs.umb.edu>
* help.h (TEXHELP, MPHELP, MFHELP): Mention the &DUMPFILE capability.
Tue Aug 22 11:44:08 1995 Karl Berry <karl@cs.umb.edu>
* kpathsea.make (c_auto_h_dir): Define this.
* dvitype.ch: Don't call xfclose if we didn't open the tfm file.
Mon Aug 21 16:43:39 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (FOPENRMODE): Define this.
* dvitype.ch (open_tfm_file): Don't call xopenfile, since we don't
want to exit if no TFM file.
Fri Aug 18 09:21:14 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (program_files): Put .tcx files here.
Tue Aug 8 14:56:49 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (putbyte): Swallow semicolon.
Thu Aug 3 11:32:07 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (dist): Only remake triptrapdiffs if necessary.
Tue Aug 1 19:26:21 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Merge Wayne's dynamic font sizing changes.
* texmfmem.h (B0, B1): Declare as short, instead of quarterword.
Mon Jul 31 17:46:11 1995 Karl Berry <karl@cs.umb.edu>
* mp.ch, mf.ch, tex.ch: Omit $ from setup_bound_var calls.
Sat Jul 29 13:13:31 1995 Karl Berry <karl@cs.umb.edu>
* configure.in: Generate mpware/Makefile.
* texmfmp.h: Rename from texmf.h.
* dvitomp.ch, dvitomp.web: New files.
* Makefile.in: Add rules to make dvitomp.
* help.h (DVITOMPHELP): Define this.
Fri Jul 28 11:10:46 1995 Karl Berry <karl@cs.umb.edu>
* mp.ch: Dynamically allocate/set str_pool, string_vacancies,
etc., for the sake of the mptrap test.
* Makefile.in (post-dist): Include *.sed. From Greg.
* kpathsea.make (kpathsea_parent): Define as ../.., not using
$(top_srcdir). From Greg.
* mp.ch (copy_old_name): Null-terminate.
* triptrap/texmf.cnf (MPXCOMMAND): Set to `none'.
Thu Jul 27 17:56:18 1995 Karl Berry <karl@cs.umb.edu>
* mp.ch (more_name): Rewrite to make last . the one that counts
for the extension. And change jobname setting accordingly.
* Makefile.in (all_subdirs): Add window.
Tue Jul 25 13:17:28 1995 Karl Berry <karl@cs.umb.edu>
* mp.ch: malloc old_file_name.
Mon Jul 24 17:45:42 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (mptrap): New target.
(trap): Rename some trap.* files to avoid conflicts.
Sun Jul 23 11:43:51 1995 Karl Berry <karl@cs.umb.edu>
* help.h (MPHELP): Define this.
Sat Jul 22 14:20:50 1995 Karl Berry <karl@cs.umb.edu>
* *.ch: Reformat changes to get rid of extra % lines, etc.
* Makefile.in (mp, mfpextra.c): New target.
(mp_o, mp_c): New variables.
* texmfmem.h: Include MP in #ifdef's and comments.
Fri Jul 21 15:31:17 1995 Karl Berry <karl@cs.umb.edu>
* texmf.h (undumpuppercheckthings): New macro.
* tex.ch (hyf_next, font_name, font_area): Use it. These base
types are unsigned, so comparing to 0 is redundant.
* mf.ch: Dynamicize main memory, a la TeX. Now with a memory size
of 3001, we pass the trap test. Whew.
Thu Jul 20 13:48:40 1995 Karl Berry <karl@cs.umb.edu>
* texmf.h (put[24]bytes): Define these again.
* mf.ch: Use them instead of the default for tfm_two and tfm_four.vb
* mf.ch: Dynamically set error_line, half_error_line,
max_print_line, gf_buf, gf_buf_size. This is for the trap test.
Wed Jul 19 11:31:00 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch (dvi_buf_size): Rename all occurrences of dvibuf_size.
Tue Jul 18 14:09:15 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-links): Install links for inimf and initex.
* configure.in: Check for -lposix giving us sigemptyset.
From: bernt@weinberg.pop.bio.aau.dk (Bernt Guldbrandtsen).
Mon Jul 17 13:08:32 1995 Karl Berry <karl@cs.umb.edu>
* configure.in: Change default to not include X support.
* Makefile.in (mf): Add dependency on $(windowlib), and link with
$(windowlink).
$(windowlib): New variable, target, etc.
* window: New directory for the window support.
* configure.in: Use NO_DUMP_SHARE rather than NO_FMTBASE_SHARE, in
preparation for Metapost.
Sun Jul 16 14:19:04 1995 Karl Berry <karl@cs.umb.edu>
* configure.in (ipc, auto-dump): AC_ARG_ENABLE these.
Sat Jul 15 16:04:13 1995 Karl Berry <karl@cs.umb.edu>
* acconfig.h: Make this a symlink to ../kpathsea/acconfig.h, as
with everything else.
* configure.in: Start adding all the --with's and --enable's.
* tex.ch: Patches from Wayne to allow extending the hash table via
a hash_extra value.
Fri Jul 14 14:36:47 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Regenerate the first 256 strings if the user changed
which characters are printable.
Thu Jul 13 14:09:19 1995 Karl Berry <karl@cs.umb.edu>
* help.h (TEXHELP): Document -translate-file.
* texmf.h (setupcharset): Declare this.
* tex.ch (is_printable): Declare this new array.
Sat Jul 8 13:54:13 1995 Karl Berry <karl@cs.umb.edu>
* bibtex.ch (stat, tats): Enable these by default.
* cpascal.h (BIB_XRETALLOC): Slight front end to XRETALLOC for
BibTeX's dynamic arrays.
Wed Jul 5 17:47:03 1995 Karl Berry <karl@cs.umb.edu>
* bibtex.ch: Begin merging changes for dynamic array allocation.
From Nelson.
Thu Jun 29 19:06:31 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch (font_bc, font_ec): Do not check these unsigned char
values against the range [0,255] when undumping.
* tex.ch: Use fputs instead of wterm for string variables
name_of_file, TEX_format_default.
* mf.ch: Likewise.
* help.h (TEX_IPC_HELP): Split this out from TEXHELP.
Wed Jun 21 15:35:09 1995 Karl Berry <karl@cs.umb.edu>
* help.h (MFHELP, TEXHELP): Document -base and -fmt respectively.
* tex.ch: Restore checking of various arrays when undumping.
* texmf.h (undumpcheckedthings): Macro to do the checking.
Tue Jun 20 19:53:38 1995 Karl Berry <karl@cs.umb.edu>
* help.h (TEXHELP) [IPC]: Document -ipc and -ipc-start.
Fri Jun 16 11:45:48 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Add IPC changes.
From: Shamim Mohamed <shamim@howland.isu.edu>
From: Tomas G. Rokicki <rokicki@CS.Stanford.EDU>
Tue Jun 13 11:30:57 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch (max_font_max): Increase to 1000, why not.
* mf.ch (tfm_out, tfm_two, tfm_four, tfm_qqqq): Leave default
definitions.
* kpathsea.make (kpathsea_parent): Use $(top_srcdir). From Greg.
Sat Jun 10 19:25:10 1995 Karl Berry <karl@cs.umb.edu>
* texmf.h: Include c-pathch.h.
* tex.ch: Add changes to allow > 256 fonts.
* texmfmem.h (fmemoryword): New type.
From: wgs@maths.ucd.ie (Wayne G. Sullivan) and
From: Bernd Raichle <raichle@azu.informatik.uni-stuttgart.de>.
Thu Jun 8 20:11:43 1995 Karl Berry <karl@cs.umb.edu>
* mf.ch: Use IS_AREA_SEP here, too.
Sun Jun 4 13:56:08 1995 Karl Berry <karl@cs.umb.edu>
* config.h (unlink) [UNLINK_MISSING && HAVE_REMOVE]: Define as remove.
* mft.ch: No longer need special case in input_ln, eof itself
checks now.
* {tangle,weave}.ch: Avoid /dev/null by just leaving the variable
name NULL.
* tex.ch (area_delimiter): Do : stuff for Amiga. From Andreas Scherer.
* texmf.h (initscreen, updatescreen, blankrectangle, paintrow):
Add prototypes for these.
* Makefile.in (post-dist): Work on this.
Sat Jun 3 11:45:32 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Redo setup_bound_var to allow _'s in the names the user sees.
* bibtex.ch (ent_str_size): Double to 200. From Nelson.
* texmf.h (setupboundvariable): Declare this.
Fri Jun 2 17:37:36 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch: Merge in Wayne's dynamic array diffs.
(hash_size, hash_prime): Increase to 10000 and 8501 for no
particular reason.
* texmf.h (xmallocarray): Add one to element size.
Thu Jun 1 11:45:11 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch, mf.ch: If input file is foo.tex, output goes to foo.dvi,
not foo.tex.dvi! Fix from May 28 change.
* tex.ch (trie_size): Increase to 50000 to support U[KS] English,
French, and German.
From: Richard Walker <Richard.Walker@cs.anu.edu.au>.
(nest_size): Increase to 100.
From: lamport@src.dec.com.
* {tex,mf,bibtex,gftodvi}.ch (name_of_file): Declare as a pointer
to text_char, not char, so 8-bit filenames get echoed in correctly
in ^^ notation. From: thorinn@diku.dk (Lars Mathiesen).
Sun May 28 17:45:33 1995 Karl Berry <karl@cs.umb.edu>
* tex.ch, mf.ch: If input file is a.b.{tex,mf}, jobname is a.b, so
we write to a.b.log. From rs@purple.in-ulm.de (Ralph Schleicher).
* vptovf.ch: Increase sizes of constants (Sebastian).
Sat May 27 17:15:46 1995 Karl Berry <karl@cs.umb.edu>
* dvi{type,copy}.ch: Add options to replace the dialogue.
Fri May 26 17:34:06 1995 Karl Berry <karl@cs.umb.edu>
* config.h (strtol) [!HAVE_STRTOL]: Declare this.
* configure.in (strtol): AC_CHECK_FUNCS for it.
* cpascal.h (addressofint): Rename to just addressof.
* *.ch: Change calls.
Wed May 24 19:37:25 1995 Karl Berry <karl@cs.umb.edu>
* help.h, *.ch: Finish -help and -version for all but dvitype.
Sat May 20 13:02:04 1995 Karl Berry <karl@cs.umb.edu>
* *.ch: Use new usage(1, 'progname').
* cpascal.h (basenamechangesuffix): Take three args now.
*.ch: Change calls.
Fri May 19 19:29:06 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (findsuffix): Another in the underscore list.
* help.h (GFTOPK): Define help string.
* gftopk.ch: Add -help and -version support.
Tue May 16 15:47:02 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (removesuffix): Add this to the underscore list.
* help.h (MFT, PATGEN, VFTOVP): Define help string.
* {vftovp,patgen,mft}.ch: Add -help and -version support.
Sun May 14 11:14:46 1995 Karl Berry <karl@fosse>
* texmf.h (bytefile, wordfile): Do not define here.
* mf.ch, tex.ch (alpha_file, byte_file, word_file): Keep these
declarations.
Tue May 9 15:47:55 1995 Karl Berry <karl@cs.umb.edu>
* help.h (PKTYPE, GFTYPE, TFTOPL, PKTOGF): Define *HELP strings.
* {pktogf,tftopl,gftype,pktype}.ch: Add -help and -version support.
Mon May 8 12:05:05 1995 Karl Berry <karl@cs.umb.edu>
* pooltype.ch: Append `pool' if necessary.
Sat May 6 11:24:01 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (lib_sources): Add usage.c.
* config.h (usage): Declare it.
Fri May 5 17:48:13 1995 Karl Berry <karl@cs.umb.edu>
* pooltype.ch: Write the usage function in C now, passing in the
help string.
Thu May 4 19:41:05 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h: Include help.h.
* help.h: New file for help messages.
Fri Apr 28 13:45:08 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h: Include kpathsea/tex-file.h here.
* *.ch: Don't bother including it in only the relevant change files.
* cpascal.h (alphafile, fileptr): Don't bother defining these.
* bibtex.ch (alpha_file): Define as text.
Tue Apr 25 13:43:13 1995 Karl Berry <karl@cs.umb.edu>
* *.ch: Don't bother changing program statements or removing
compiler directives now.
* *.ch: Use ^char instead of c_string where possible.
* Makefile.in: Clean up clean rules, etc.
* Update all .web files from 21 March 1995 Knuth archive. (bibtex,
dvicopy, and pktogf are not included.) New versions for dvitype (3.5),
mf (2.718), pltotf (3.5), tangle (4.4), tex (3.14159), and
vptovf (1.4).
Sun Apr 23 10:54:58 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (mfextra.c, texextra.c): Don't just link, substitute
for which one we are.
Sat Apr 22 13:22:09 1995 Karl Berry <karl@cs.umb.edu>
* mf.ch (format_ident): Don't set to INIMF unless we are.
* texmf.h (kpsetexpoolformat): Define this.
(write_out): Let's try always using fwrite. Shouldn't it be more
efficient than write(2)?
(xmallocarray): New routine for the hyphenation tries.
* tex.ch: Avoid special case for first bad_pool; instead, change
a_close to not complain about already-closed files.
* tex.ch: Use kpathsea routines and constants.
* mf.ch: Copy pool file in correctly.
Fri Apr 21 11:16:12 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h: Include progname.h.
(putbyte): Check return status.
* Makefile.in (web2c_programs): Remove regfix.
* cpascal.h, texmf.h: Add prototypes.
* mf.ch (debug, gubed): Use the cpp symbol MF_DEBUG, instead of
DEBUG, which kpathsea uses. Use kpathsea routines and constants.
Tue Apr 18 11:03:55 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (cfree): Define this.
* texmf.h (dump_path): Define as the kpse_*_fmt, not the old path name.
Mon Apr 17 10:00:04 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in: Add rules for Metafont and TeX.
Fri Apr 14 15:30:34 1995 Karl Berry <karl@cs.umb.edu>
* dvicopy.ch, dvitype.ch, gftopk.ch: Use xfseek and xftell instead
of checked_fseek.
* cpascal.h (checked_fseek): Remove this.
* cpascal.h (open_input, open_output, aclose): Declare with prototypes.
Tue Apr 11 13:15:51 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (bibtex.c): Depend on bibtex.cvtsed.
Mon Apr 10 17:07:52 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (standardinput, standardoutput): Do not conditionalize
these on BibTeX.
Tue Apr 4 15:22:08 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (web2c/web2c): Dependency is now on web2c/main.c,
not web2c/web2c.c.
* cpascal.h (kpse{bib,bst}format): Add these.
* bibtex.ch: Don't use file_name_size as an array size.
Sun Mar 19 17:53:01 1995 Karl Berry <karl@cs.umb.edu>
* gftodvi.ch: Add -help, -version, change help message.
Sat Mar 18 17:24:47 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (input): #define as stdin.
(kpsefindvf): Also use this for dvicopy.
Fri Mar 10 10:52:09 1995 Karl Berry <karl@cs.umb.edu>
* *.ch (arg_options): Don't bother defining this, we never use it
any more.
Thu Mar 9 15:50:12 1995 Karl Berry <karl@cs.umb.edu>
* acconfig.h: Warn that this is not the right thing to edit to fix
configuration problems.
Tue Feb 21 13:41:25 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (output): Define as stdout.
* *.ch: Don't bother to redefine `output' as `stdout'.
Mon Feb 20 15:24:31 1995 Karl Berry <karl@cs.umb.edu>
* *.ch: Rationalize argument parsing and usage messages.
* cpascal.h (kpsefind{mf,tex}): Define these.
Sun Feb 5 15:26:28 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (basenamechangesuffix): Declare this.
Tue Jan 10 11:43:27 1995 Karl Berry <karl@cs.umb.edu>
* texmf.h (glueratio): Move to here from config.h.
* config.h (ourpaths.h): No longer needed.
(link, getname, etc.): Move to cpascal.h.
* cpascal.h (nil): Define to be NULL.
* pktogf.ch: Use nil instead of NULL.
Sat Jan 7 16:31:15 1995 Karl Berry <karl@cs.umb.edu>
* cpascal.h (kpseinitprog): Add this.
Tue Jan 3 15:19:52 1995 Karl Berry <karl@cs.umb.edu>
* config.h: getopt.h is in kpathsea now.
Mon Dec 19 13:22:04 1994 Karl Berry <karl@cs.umb.edu>
* cpascal.h (kpsefindfile): Add this -- more _ synonyms.
(kpse{pk,vf}format): And this.
Sun Dec 18 16:33:29 1994 Karl Berry <karl@cs.umb.edu>
* cpascal.h (flush): May as well define `break' as fflush in the
change files, and remove this.
* *.ch: Redefine `break' as `fflush' instead of `flush'.
Sat Dec 17 13:40:19 1994 Karl Berry <karl@cs.umb.edu>
* vptovf.ch: Use cmdline instead of argv, rename gargv to argv,
make the filenames be C strings, and extend them if necessary.
* config.h (chartostring): Declare it.
(setpaths): Remove this.
* cpascal.h: Doc fix.
* tangle.ch (Parse arguments): Use char_to_string instead of
make_suffix_char.
* weave.ch (Define the option...): Use char_to_string for -x.
Thu Nov 24 13:34:16 1994 Karl Berry <karl@cs.umb.edu>
* vptovf.ch (hash_size, max_kerns): Increase per Sebastian.
Tue Nov 15 11:47:35 1994 Karl Berry <karl@cs.umb.edu>
* cpascal.h (kpsesetprogname): Define to
kpse_set_progname. Gosh, this is annoying.
Mon Nov 14 13:28:04 1994 Karl Berry <karl@cs.umb.edu>
* {patgen,pooltype,pltotf,tftopl}.ch: Rewrite for argv changes, etc.
* cpascal.h (vstrcpy, vstrcat): Toss these. Change callers.
* *.ch: Rename c_char_pointer to c_string.
* config.h (argv): Rename to cmdline, and make a function.
* main.c (cmdline): Renamed from argv.
(gargv): Rename to argv.
(makesuffixchar): Declare.
Sun Nov 13 16:19:27 1994 Karl Berry <karl@cs.umb.edu>
* configure.in, Makefile.in: Update for Autoconf 2.0.
Sun Nov 6 15:57:17 1994 Karl Berry <karl@cs.umb.edu>
* acconfig.h: Incorporate c-auto.h.top (and remove that file), for
Autoconf 2.0.
Fri Oct 28 11:13:56 1994 Karl Berry <karl@cs.umb.edu>
* Makefile.in (tangle.c, tftopl.c): Depend on $(web2c_aux)
$(web2c_programs).
* tangle.ch: Redo argument parsing using getopt, extend_filename, etc.
* cpascal.h (extendfilename): Add this to _ list.
Thu Oct 27 17:58:50 1994 Karl Berry <karl@cs.umb.edu>
* tftopl.ch (tfm_name, pl_name): Declare as C strings; call
kpse_find_tfm.
* cpascal.h (reset, rewrite): Call plain xfopen, not xfopen_pas.
Mon Oct 10 16:23:13 1994 Karl Berry <karl@cs.umb.edu>
* Makefile.in (web2c_makeargs): Don't pass LEX et al.
(lib_makeargs): Don't pass RANLIB and LN.
Sun Sep 25 16:49:30 1994 Karl Berry <karl@cs.umb.edu>
* configure.in (AC_OUTPUT): Generate man/Makefile, changes for new
source directories.
* Makefile.in: Everything changes.
Fri May 27 12:37:36 1994 Karl Berry (karl@cs.umb.edu)
* c-auto.h.top: (XVIEWWIN, X10WIN): Take these out.
* tex.man, mf.man: Take out references to USE_MAKETEX*.
Tue Apr 26 14:05:22 1994 Karl Berry (karl@cs.umb.edu)
* configure.in: Use AC_FIND_XTRA, for Autoconf 1.9.
Mon Apr 18 13:22:21 1994 Karl Berry (karl@ra.cs.umb.edu)
* configure.in, Makefile.in: Changes for the new configure.
Sun Apr 17 16:16:28 1994 Karl Berry (karl@ra.cs.umb.edu)
* Makefile.in (top_srcdir): Define this for configure to substitute.
Sat Mar 12 10:19:04 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec): Install relative vir* links, instead
of absolute. From Simon.
Wed Feb 23 06:54:49 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (manpages): Pass infodir down. From Ken Yap.
Wed Feb 2 11:00:09 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Tue Feb 1 11:21:23 1994 Karl Berry (karl@cs.umb.edu)
* configure.in (wlibs) [X11WIN]: Run AC_HAVE_LIBRARY for Xext, and
include it if we have it.
* Makefile.in (do-kpathsea): Depend on *.c and *.h from
$(kpathsea_srcdir), not $(kpathsea_dir).
* configure.in [SUNWIN]: Link sun.c to sun-sunview.c in this case.
Sat Jan 22 14:24:51 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Fri Jan 14 16:02:35 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-fmts): The var is `fmtdir', not `formatdir'.
Sat Dec 18 13:37:17 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (makeargs): Pass DEFS.
Wed Dec 15 06:29:49 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (*formats*): Rename to fmts.
(formats): New target to do both bases and formats.
Sun Dec 12 19:13:44 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (manpages): Don't bother to pass cmsources.
Sun Nov 14 02:31:54 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (web2c): do-kpathsea before do-lib.
* Makefile.in (manpages, installargs): texfontdir => fontdir.
* Makefile.in (version): No separate texmf_version and
web2c_version any more.
Thu Nov 11 11:11:05 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (xincludedir, xlibdir, wlibs): Rename.
Sun Nov 7 14:15:14 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (makeargs, etc.): Don't pass srcdir down. From
harlan@cms-stl.com.
* configure.in (AC_LONG_64_BITS): Invoke this.
Sat Nov 6 13:29:57 1993 Karl Berry (karl@cs.umb.edu)
* configure.in (HP2626WIN, etc.): Don't check for the WIN symbols
that we don't need.
Thu Oct 28 14:28:55 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Call AC_FIND_X and AC_FIND_XTRA.
Sun Oct 3 13:56:24 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Rewrite to include common.ac.
Sat Oct 2 17:50:30 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-*): Don't reassign PATH, just invoke
mkdirchain explicitly.
* Makefile.in: Begin rewrite.
Sun Aug 22 19:15:05 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-*): mkdirchain is in the top level.
Tue Aug 3 12:56:31 1993 Karl Berry (karl@cs.umb.edu)
* aclocal.m4 (AC_X11_LOCATION): Rewrite tests to use for loops.
Sat Jul 31 11:36:03 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Remove AC_PREFIX.
Fri Jul 30 12:42:55 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in [hayley]: Make this ifdef, update dist target, etc.
Wed Jul 21 19:47:00 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (configclean): New target.
Sat Jul 3 00:36:33 1993 Paul Eggert (eggert@twinsun.com)
* aclocal.m4: If -L/usr/openwin/lib is used, then prefer
-I/usr/openwin/include. Fix typo: uname's output was being discarded.
These patches are for Solaris 2.2.
Tue May 25 10:08:43 1993 Karl Berry (karl@cs.umb.edu)
* configure.in (AC_HAVE_HEADERS): Test for `pwd.h'.
Sat May 22 11:22:21 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (web{,2c}-dist): Run gzip -9.
Tue May 18 14:06:04 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-*): mkdirchain on install dirs, and put
mkdirchain in the dist.
Sun May 9 10:38:46 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (extraclean): Remove *.i *.s. Changes for kpathsea.
Sat Apr 24 16:42:42 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (makeargs): Add $(MAKEARGS).
Sat Apr 10 14:58:32 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Do AC_XENIR_DIR after AC_DIR_HEADER.
Fri Apr 2 06:42:08 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (texinputdir, mfinputdir): Change default paths to
.../inputs.
Mon Mar 29 08:55:12 1993 Karl Berry (karl@cs.umb.edu)
* configure.in (*WIN): Put $wlibs after the necessary libraries,
instead of before.
Thu Mar 25 16:00:11 1993 Karl Berry (karl@cs.umb.edu)
* aclocal.m4 (AC_ISC_WLIBS): Merge into AC_X11_LOCATION; also
check for -ldnet (from Martyn.Johnson@cl.cam.ac.uk).
* configure.in (AC_ISC_WLIBS): Remove.
Sun Feb 28 11:02:19 1993 Karl Berry (karl@cs.umb.edu)
* configure.in (XVIEWWIN): Use -lX11.
Mon Feb 22 17:41:46 1993 Karl Berry (karl@apollo.cs.umb.edu)
* Version 5.851d.
* Makefile.in (install-exec): Run install-exec in subprograms, not
install.
(install-data): Do install-data in subdirs.
Sun Feb 21 08:27:14 1993 Karl Berry (karl@cs.umb.edu)
* configure.in (SMALLBibTeX): Forgot $ in test, hence always set
up for small BibTeX.
* configure.in (AC_PROG_CC, AC_PROG_CPP): Call explicitly, instead
of relying on AC_GCC_TRADITIONAL. Apparently require/provide
aren't reliable.
* Makefile.in (dist): Remove lib/paths.h from the distribution.
Sun Feb 14 11:29:23 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (lib/paths.h): Only use texformats once.
Tue Feb 9 14:22:05 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (topfiles): Add I*.
* INSTALL: New file from README.
Sun Feb 7 20:09:01 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (web2c-dist): make tangleboot instead of depending
on do-tangle.
Fri Jan 29 11:27:38 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (common-trip): New target.
(tr[ai]p): Use it.
Thu Jan 28 07:27:24 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (web2c-dist): Make tangleboot.c.
Tue Jan 26 16:48:36 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Remove texware and mfware.
* Makefile.in (triptrapdirs): Change to {dvi,font}util; merge the
contents of texware and mfware with the other directories.
Mon Jan 25 11:36:37 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-{formats,bases}): Depend on
{formats,bases}, not do-&.
* Makefile.in (trip, trap): New targets.
(triptrap): Depend on them.
(run-trip, run-trap): Likewise.
Sun Jan 24 12:06:28 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Add AC_CONST.
* Makefile.in (web2c-dist): Rename the lex and yacc output so it
doesn't get used.
* Makefile.in (run-trap): Depend on triptrap.
* configure.in: Do AC_DECLARE_YYTEXT last, to work around a bug in
Autoconf 1.3.
Sat Jan 9 15:22:37 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (configure, config.status): cd $(srcdir) first.
Fri Jan 1 14:23:47 1993 Karl Berry (karl@cs.umb.edu)
* configure.in (AC_USG, AC_MEMORY_H): Delete.
(AC_HAVE_HEADERS): Call for string.h and memory.h.
Wed Dec 23 07:00:53 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (topfiles): Don't use the .W2C suffix.
(web2c-dist): Don't rename ChangeLog.
* *.W2C: Remove suffix.
Sun Dec 13 14:04:31 1992 Karl Berry (karl@cs.umb.edu)
* configure.in: Check for window systems via c-auto.h.in.
* configure.in: Don't bother to copy the distributed tex, mf,
bibtex change files; the Makefiles will do it.
* Makefile.in (c-sources): New target.
Sat Dec 12 14:08:35 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distdir): Unpack into web2c-*.
* configure.in: Use sed instead of patch to make the small change
files.
* configure.in: Create Makefiles in subdirectories.
Thu Dec 10 10:35:18 1992 Karl Berry (karl@cs.umb.edu)
* GNUmakefile.in (GNUmakefile): Add $(srcdir) to dependency, and
use $(SHELL) instead of sh.
(config.status): Use $(SHELL).
Sun Oct 25 05:58:21 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (web2c-dist): Dist the .gdbinit files.
Sun Oct 18 13:44:48 1992 Karl Berry (karl@cs.umb.edu)
* configure.in (AC_INIT): Use MACHINES.W2C instead of tex/tex.web
for the unique file. (melvin@math.psu.edu)
Sat Oct 17 17:47:00 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (run-tr[ai]p): Pass $(makeargs), so $(LN) is
propagated. (From metcalf@catfish.LCS.MIT.EDU.)
Thu Oct 15 08:35:14 1992 Karl Berry (karl@cs.umb.edu)
* configure: Ran Autoconf 1.2.
Thu Oct 1 17:02:24 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (stamp-{bases,formats}): pass $(makeargs) down.
Thu Sep 24 10:55:07 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install*): use $(LN) instead of `ln', so symlinks
are used if they are supported.
* configure.in: link with -lolgx if we are using xview.
(mroth@afit.af.mil)
* Makefile.in (dist): remove tangleboot.o.
Sun Sep 20 12:53:09 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (config.status): use sh to run configure --no-create.
* Makefile.in (realclean): OK, don't remove configure.
Thu Sep 17 08:42:41 1992 Karl Berry (karl@hayley)
* Makefile.in (exec_prefix): new variable.
(bindir): use it.
* Makefile.in (install*): mkdir prefix directories.
Mon Sep 14 18:00:57 1992 Karl Berry (karl@hayley)
* Makefile.in (config.status): new target.
(Makefile): depend on config.status.
Sat Sep 12 16:00:24 1992 Karl Berry (karl@hayley)
* README.W2C: briefly discuss Autoconf.
Thu Sep 10 08:59:26 1992 Karl Berry (karl@hayley)
* Makefile.in (dist): include COPYING* from our master directory,
not the source directory.
* Makefile.in (realclean): remove configure.
Tue Sep 8 16:50:06 1992 Karl Berry (karl@hayley)
* configure.in: test for more Unix variants.
Fri Sep 4 08:58:06 1992 Karl Berry (karl@hayley)
* Makefile.in (extraclean): new target.
Thu Aug 27 08:57:15 1992 Karl Berry (karl@hayley)
* configure: regenerated from Autoconf 1.1.
Wed Aug 12 16:33:30 1992 Karl Berry (karl@hayley)
* README.W2C: aldebaran has a different name now.
Sat Aug 8 10:12:23 1992 Karl Berry (karl@hayley)
* makefile.in (configure, Makefile): new targets.
Sat Aug 1 08:08:49 1992 Karl Berry (karl@hayley)
* configure.in: grep for `#define', not just `define'.
Fri Jul 31 17:03:11 1992 Karl Berry (karl@hayley)
* Makefile.in (dist): include our aclocal.m4.
* configure.in: missed one of the grep -s's.
* Makefile.in (LIBS): include $(extralibs).
Sat Jul 25 14:46:59 1992 Karl Berry (karl@hayley)
* configure.in: test if patch is available, and if not, issue a
warning.
* configure.in: redirect grep output, instead of relying on -s.
Wed Jul 22 09:14:20 1992 Karl Berry (karl@hayley)
* configure.in: update for Autoconf 1.0.
Mon Jul 13 08:37:18 1992 Karl Berry (karl@hayley)
* Makefile.in (formats): don't do etex by default.
Fri Jul 3 11:44:22 1992 Karl Berry (karl@hayley)
* MACHINES.W2C: update from bernd.
* configure.in: check for XVIEWWIN.
Thu Jul 2 15:24:41 1992 Karl Berry (karl@hayley)
* Makefile.in (cflags): remove.
(coptimize): change to CFLAGS.
* Run Autoconf 0.119.
Thu Jun 25 07:51:10 1992 Karl Berry (karl@hayley)
* configure.in: called AC_PROG_CPP twice.
Tue Jun 23 09:14:32 1992 Karl Berry (karl@hayley)
* Makefile.in (manext): default to `1', not `l'.
Sun Jun 14 11:08:41 1992 Karl Berry (karl@hayley)
* Makefile.in (web2c-dist): show the sizes of tangleboot.*.
Thu Jun 11 08:59:40 1992 Karl Berry (karl@hayley)
* Makefile.in (.NOEXPORT): new target, since Autoconf doesn't add
it automatically any more.
Thu Jun 4 08:25:25 1992 Karl Berry (karl@hayley)
* configure.in (AC_HEADER_FILE): rename to AC_CONFIG_HEADER, for
Autoconf 0.115.
Fri May 29 16:38:27 1992 Karl Berry (karl@hayley)
* Makefile.in (installargs): include $(makeargs), in case the
person didn't `make all' first.
Sat May 16 10:09:14 1992 Karl Berry (karl@hayley)
* configure.in: PROG_CPP must come before GCC_TRADITIONAL.
Fri May 15 09:47:03 1992 Karl Berry (karl@hayley)
* configure.in: add AC_GCC_TRADITIONAL and AC_PROG_CPP.
* configure.in: AC_HEADER_MISSING is now AC_HEADER_CHECK.
Thu May 14 19:20:57 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Wed May 13 08:54:33 1992 Karl Berry (karl@hayley)
* Makefile.in (VPATH): change for new Autoconf.
Tue Apr 28 10:17:23 1992 Karl Berry (karl@hayley)
* configure.in: Autoconf's prefix is now AC_, not M_.
Sat Apr 25 09:04:59 1992 Karl Berry (karl@hayley)
* README.W2C: various fixes.
* AUTHORS.W2C: new file, shortening README.
Thu Apr 23 06:38:46 1992 Karl Berry (karl@hayley)
* Makefile.in: fix clean targets for latest GNU stds.
(bases): pass localmodes.
(makeargs): pass MFLAGS.
Above from Andreas.
* README.W2C, configure.in: Refer to site.h.in.
* Makefile.in (web2c-dist): distribute it.
(prefix): set to /usr/local.
* Makefile.in (.NOEXPORT): remove, as configure automatically adds
it now.
* Makefile.in (installargs): mfpool was going to the wrong place.
Wed Apr 22 08:41:18 1992 Karl Berry (karl@hayley)
* configure.in: M_SIGTYPE is now M_RETSIGTYPE.
* configure.in: use M_LN_S.
* Makefile.in (LN): set to @LN_S@.
* MACHINES.W2C (DEC 5000/250, Ultrix 4.2a): from Elizabeth.
* Makefile.in (formats): remove \ at end of comment line, as
Ultrix make can't handle it.
Mon Apr 20 06:32:10 1992 Karl Berry (karl@hayley)
* Makefile.in (check): an alias for `run-triptrap'.
Sun Apr 19 11:54:41 1992 Karl Berry (karl@hayley)
* Makefile.in (distclean): add as another alias for `realclean'.
Fri Apr 17 08:52:06 1992 Karl Berry (karl@hayley)
* Version 5.851b.
Tue Apr 14 17:26:32 1992 Karl Berry (karl@hayley)
* Makefile.in (web/tangleboot.c): just make tangleboot.c.
* Makefile.in (clean-triptrap): just remove tex/tex.p and mf/mf.p,
as we don't want to remove the change files configure constructed.
Mon Apr 13 09:00:39 1992 Karl Berry (karl@hayley)
* configure.in: do M_PREFIX before M_FLEX, so we can guess
$(prefix)/lib/libfl.a for the flex library.
Fri Apr 10 17:02:56 1992 Karl Berry (karl@hayley)
* Makefile.in (web2c-dist): remove */c*.ch in what get distributed.
* configure.in: don't mess up if small vs. bib TeX/MF/BibTeX
changes from configure to configure.
* Makefile.in (infodir): remove this, as we don't have Texinfo
documentation (yet).
* README.W2C: correct numbering.
* MACHINES.W2C: add entry for Sun 3/SunOS 4.0.3 from Elizabeth.
Wed Apr 8 15:47:02 1992 Karl Berry (karl@hayley)
* README.VMS: new file.
Fri Apr 3 11:56:13 1992 Karl Berry (karl@hayley)
* configure.in, Makefile.in: guess $(prefix) automatically.
Fri Apr 3 09:54:21 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Thu Apr 2 17:19:09 1992 Karl Berry (karl at claude.cs.umb.edu)
* Makefile.in: make stamp-web2c depend on stamp-lib, etc.
Thu Apr 2 13:51:45 1992 Karl Berry (karl at ra.cs.umb.edu)
* Makefile.in (tangleboot.pas): change to tangleboot.c.
Mon Mar 30 08:01:35 1992 Karl Berry (karl at hayley)
* Makefile.in: use $(MAKE), not make.
Sun Mar 22 09:26:20 1992 Karl Berry (karl at hayley)
* configure.in: don't make a link to lib/site.h, it's already there.
* Makefile.in (mfargs): new variable.
(programs): pass $(mfargs) if we are doing mf.
(web2c): remove this.
Sat Mar 21 09:08:31 1992 Karl Berry (karl at hayley)
* Makefile.in (web-dist, web2c-dist): redo.
* configure.in: test for site.h in lib/.
* site.h (TEXPOOLNAME): new macro for installers to redefine.
* Makefile.in (*manpages): don't pass SITEDIR; pass srcdir instead.
Fri Mar 20 15:53:21 1992 Karl Berry (karl at hayley)
* configure.in: do M_X11_LOCATION.
* README.W2C: document these changes.
* Makefile.in (install-programs): rename from install. Make
`install' install everything. Also, go into subdirectories to
do the installation.
(install-manpages): don't pass INSTALL_PROGRAM.
(dist): do both web2c-dist and web-dist.
(mostlyclean): new clean target.
Sat Mar 7 10:18:41 1992 Karl Berry (karl at hayley)
* configure.in: change config-auto.h to c-auto.h.
Fri Feb 14 07:56:42 1992 Karl Berry (karl at hayley)
* configure.in (wlibs): put the -l's here directly, instead of
setting to a make variable.
* Makefile.in (*lib): remove the variables.
Tue Feb 11 09:56:01 1992 Karl Berry (karl at hayley)
* configure.in: test for memcpy et al. in <memory.h> only.
* configure.in: test for <limits.h> missing.
* configure.in (extrawlibs): remove this, just assign to wlibs.
* Makefile.in (copt): never mind, use CC.
Sun Feb 9 09:54:27 1992 Karl Berry (karl at hayley)
* Makefile.in (copt): new variable, for ISC's -posix.
* Makefile.in (realclean): remove Makefile and config.status.
Sat Feb 1 16:03:05 1992 Karl Berry (karl at hayley)
* site.h-dist: remove subdirectory stuff. Add GFFONTS and PKFONTS.
Fri Jan 24 09:11:29 1992 Karl Berry (karl at hayley)
* configure.in: do M_CHAR_UNSIGNED, and test for endianness here.
* config: gets removed.
* site.h: gets copied from config.
* Makefile.in (cflags): don't include -I$(configdir).
(configdir): remove.
Wed Jan 15 11:33:54 1992 Karl Berry (karl at hayley)
* Makefile.in (libsources): do not include xchdir.c and xgetcwd.c,
as they're no longer needed.
* configure.in: don't test for getwd missing anymore.
Tue Jan 14 08:47:38 1992 Karl Berry (karl at hayley)
* Makefile.in (makeargs): pass wlibs.
Sun Jan 12 07:35:37 1992 Karl Berry (karl at hayley)
* Makefile.in (CFLAGS): define and pass down `cflags', instead, as
TeX and BibTeX need to add additional -D's.
* Makefile.in (.NOEXPORT): include this target to stop arg list
problems with GNU make.
* Makefile.in (clean-triptrap): call `make realclean', not
`veryclean'.
Sat Jan 11 11:59:27 1992 Karl Berry (karl at hayley)
* rename `common' to `lib'.
* configure.in: new file to automatically generate the configure
script with autoconf.
Wed Jan 8 07:44:02 1992 Karl Berry (karl at hayley)
* configure (extrawlibs): include -lnsl_s, as ISC's X11R4 stuff
needs it.
Tue Jan 7 11:24:54 1992 Karl Berry (karl at hayley)
* Makefile.in (install targets): use INSTALL_PROGRAM and
INSTALL_DATA appropriately; pass to subdirs.
* start ChangeLogs in subdirectories.
Fri Jan 3 13:20:09 1992 Karl Berry (karl at hayley)
* texware/pltotf.ch (main block): exit 0. No, rescind that; the
error code was from something else, as we already exit (0) in
common/main.c (main).
Sun Sep 1 13:26:11 1991 Karl Berry (karl at hayley)
* fontutil/vftovp.ch (Read the preamble, Read and store a font):
don't output anything unless -verbose is set.
* fontutil/vftovp.ch (Set init...): initialize vpl_name to optind
+ 2, not + 1; initialize the others to be optind and optind + 1.
Thu Aug 29 17:46:31 1991 Karl Berry (karl at hayley)
* Makefile.in (INSTALL_PROGRAM): new variable.
(INSTALL): rename from `install'.
(INSTALL_DATA): rename from `INSTALLDATA'; change uses.
(prefix, libdir): new variables.
(bindir, mandir, texlibdir, mflibdir): use prefix.
Sat Aug 24 06:37:52 1991 Karl Berry (karl at hayley)
* tex/Makefile (formats): add `amslatex.fmt'.
(amslatex.fmt): new target.
* Makefile.in (formats): likewise.
* README (Format files): describe it. Also add ``canonical
sources'' for the formats.
Fri Aug 23 09:11:50 1991 Karl Berry (karl at hayley)
* Makefile-dist: rename to Makefile.in.
* configure (makefiledist): likewise.
Mon Aug 12 08:14:18 1991 Karl Berry (karl at fosse)
* bibtex/bibtex.ch (pool_size): decrease to 512K from 5.12M.
* Makefile (install-formats, install-bases): don't do `-mkdir' in
the middle of the rule.
* common/common.defines (bytepointer): rename to pointertobyte,
since dvicopy defines a `bytepointer'.
* common/extra.h (bytepointer): likewise.
* texware/tftopl.ch: change uses.
* mf/Makefile (makeargs): update.
Sun Aug 11 08:33:44 1991 Karl Berry (karl at fosse)
* common/common.h [STRING_MISSING]: don't include <strings.h> if
`index' is already defined.
* common/texmf.c: include <ctype.h>.
* common/getopt.c [_AIX]: indent the `#pragma alloca', since
otherwise we get `undefined control' from hc.
* configure (systemtypes): fix sed commands to remove the final .h.
Sat Aug 10 12:23:24 1991 Karl Berry (karl at hayley)
* web2c/web2c.yacc (fixup_var_list): add the temp symbol used for
arrays with negative lower bounds to the symbol table.
* web2c/web2c.c (yytext): don't declare this, since we do in
web2c.h.
* texware/tftopl.ch (Read the whole input file): malloc the tfm
array if the file size is larger than the static size.
* common/common.defines (xmalloc, xrealloc, bytepointer,
casttobytepointer): declare these.
* common/extra.h (bytepointer, casttobytepointer): define these.
Mon Jul 22 06:01:41 1991 Karl Berry (karl at hayley)
* config/s-{esv3,ultrix4.2}.h: new files.
* configure: update for those systems.
Fri Jul 19 08:32:18 1991 Karl Berry (karl at hayley)
* configure (statusfile): define to be $configdir/statusfile;
always test if the s- file exists.
Sat Jul 13 10:49:01 1991 Karl Berry (karl at hayley)
* Makefile-dist (proginstall, fileinstall): change names to
`INSTALL' and `INSTALLDATA'.
* Makefile-dist (RANLIB): new variable.
(makeargs): pass it down.
* mf/MFwindow/Makefile (window.a): unconditionally use RANLIB,
since it will always be set.
* common/Makefile: make a library out of the common files.
* */Makefile (commono): reference the library.
* fontutil/vftovp.ch: implement -verbose, -charcode-format, and
output to stdout a la tftopl.
* man/vftovp.man: document this.
* texware/{pl,tf}to{tf,pl}: don't print the banner until after
we've read the input file.
* fontutil/vptovf.ch: implement -verbose a la pltotf.
* man/vptovf.man: document this.
Mon Jul 8 10:52:26 1991 Karl Berry (karl at hayley)
* common/common.h (integer): move comment about changing
fixwrites.c if integer changes here, from README.W2C.
* texware/tftopl.ch: new option -charcode-format.
(out_char): output the character code in the format requested.
* man/tftopl.man: document this.
* common/common.defines (vstrcat): new declaration.
* web2c/fixwrites.c (main): add ASCIIall to the list of variable
names who get output as characters. What a crock.
* tex/Makefile (*.fmt): don't print the \font definitions.
Thu Jul 4 07:16:39 1991 Karl Berry (karl at hayley)
* common/texmf.c: put the memory_word stuff back in `texmfmem.h',
and redo the Makefiles; we can't include it before the types
have been defined.
* */Makefile (SITEDIR): change to ../config.
* web2c/web2c.h (yytext) [!DECLARE_YYTEXT_TYPE]: new type definition.
* web2c/web2c.yacc: lowercase `TRUE' and `FALSE'.
* web2c/Makefile (web2cy.c): unconditionally move the new .h and
.c files.
* common/Makefile (endian.h, endian): remove these targets; this
is now generated by configure.
* Makefile-dist: rearrange so that configure can easily edit it.
Wed Jul 3 17:01:25 1991 Karl Berry (karl at hayley)
* common/texmf.c (input_line): don't throw away trailing form
feeds on the line.
* common/texmf.h (twohalves): throw in another two bytes of junk
if we are BigTeX or BigMF.
Mon Jul 1 06:31:18 1991 Karl Berry (karl at hayley)
* common/getopt*: update to new versions.
* */*.[ch]: rationalize includes.
* site.h: move system stuff out; it will be determined by the
configuration file.
* defaults.h: remove; it, too, will be part of the configuration
file.
* common/extra.c [BSD]: conditionalize <dirent.h> on
DIRENT_MISSING, instead.
(PATH_DELIMITER): move to common.h.
Sun Jun 30 13:44:09 1991 Karl Berry (karl at hayley)
* web2c/symtab.h: fold into web2c.h.
* web2c/Makefile (web2c*.o): remove dependency on symtab.h.
* defaults.h [__HIGHC__]: move to common.h.
(FILENAMESIZE): define to 512 if it isn't already defined.
* common/common.h (index, rindex): conditionalize on
`STRING_MISSING'. Define to be str[r]chr.
(getenv, atof): don't declare if we have <stdlib.h>.
* */*.c: change uses of [r]index to str[r]chr.
* {mf,tex}/c{mf,tex}big.ch: don't include "mfmem.h" or "texmem.h"
after all.
* common/texmf.h: include contents of memory_word structure.
* common/common.h [!index]: declare `index' to be a routine
returning a `char *'.
* web2c/regfix.c: include common.h.
(From wittig@gmdzi.gmd.de.)
* common/extra.c (space_terminate): use xord, not xchr.
* common/texmf.c (input_line): remove all space characters from
the end of the input line, not just spaces and tabs.
(topenin): use xord if NONASCII, and get rid of trailing
whitespace.
(These changes from raichle@azu.informatik.uni-stuttgart.de.
* common/{main,texmf}.c [ATARI_ST]: define _stksize (from
ridderbusch.pad@nixdorf.com).
* Makefile (SITEDIR): make default be `pwd', to simplify things.
* mf/MFwindow/Makefile (SITEDIR): lose the `..' in
-I../$(SITEDIR). (From S.P.Q.Rahtz@ecs.southampton.ac.uk.)
* common/{fileio,texmf}.c [FUNNNY_CORE_DUMP}: don't do the funny
core dump stuff if we're BibTeX (from elisabet@max.u.washington.edu).
* {tex,mf}/small.diff: new file to replace the big patches. Now
big is the default.
* bibtex/small.diff: new patch to go backwards from the big BibTeX
to the small one.
* README (Changing constants): document this.
* common/extra.c (checked_fopen): return NULL at the end, even
though we don't really return, to stop compiler warnings. (from
steele@ecn.purdue.edu).
* common/extra.c (checked_fopen): before we hand the string to
perror, make it into a C string (from
kabal@aldebaran.insl.mcgill.ca).
* tex/Makefile (latex.fmt): remove comment about hacked lplain
(from kabal@aldebaran.insl.mcgill.ca).
* web2c/Makefile (web2cy.c): Print a message about expected s/r
conflicts. Also use -v when invoking yacc.
(clean): remove `y.output'.
* Makefile (install-formats, install-bases): do `install dir1/file
dir2/file' instead of `install dir1/file dir2', since Ultrix
install is broken (in yet another way) (from
scole@doorstop.berkeley.edu).
* man/{pktogf,pktype,vftovp,gftodvi,gftopk,gftype,tftopl}.man:
document that we look in `.' first.
Sat Jun 29 08:14:12 1991 Karl Berry (karl at hayley)
* common/extra.c (cwdtestreadaccess): new routine to look in `.'
before anything else.
* common/extra.defines (cwdtestreadaccess): declare it for Pascal.
* dviutil/dvicopy.ch (VF: Open |vf_file|...),
fontutil/{pktogf.ch, pktype.ch, vftovp.ch},
mfware/{gftodvi.ch,gftopk.ch,gftype.ch},
texware/tftopl.ch: use it to open input files.
Fri Jun 28 16:40:10 1991 Karl Berry (karl at hayley)
* mf/convert: insert `volatile's to avoid MIPS C compiler bugs
(from lgy@newton.phys.washington.edu).
* defaults.h (volatile) [!__STDC__]: define to be the empty
string.
* common/texmf.c (get_date_and_time): use `time_t' instead of
`long' for `time's return type.
* bibtex/bibtex.ch: comment out hacks to do the setjmp/longjmp.
* bibtex/convert: don't put in the setjmp/longjmp.
* Makefile (CCLD): new command to do the link step (suggested by
herber@fnalf.fnal.gov). Change */Makefile to use it, and the
makeargs variable to pass it down.
* {mf,tex,mfware}/memory.h: rename this, to include conflicts with
a system <memory.h>. (from newton@gumby.cs.caltech.edu).
* {mf,tex,mfware}/Makefile: rename memory.h here, too.
* Makefile: replace all bare `if's with `-if' (from
kmr@nada.kth.se).
* defaults.h: (integer): move from site.h-dist.
* common/texmf.c: always include <sys/types.h>.
* common/texmf.c [HANDLE_INTERRUPTS]: remove this conditional,
since we unconditionally defined it, anyway.
* site.h-dist (schar) [ANSI]: change conditional to use __STDC__.
Sun Jun 9 12:27:01 1991 Karl Berry (karl at hayley)
* tex/ctex.ch: apply trie.diff; we'll always have a big
hyphenation trie, instead of requiring the installer to patch
it.
Wed May 8 07:31:19 1991 Karl Berry (karl at hayley)
* Makefile (stamp-{bases,formats}): make dependent on ini{mf,tex}.
* {mf,tex}/Makefile ({*.base,*.fmt}): likewise.
* mf/cmf.ch (max_strings): change default for small Metafont to
3000: when modes.mf and plain are loaded, there is only room for
250 user strings.
(string_vacancies): change to 10000.
Fri May 3 06:46:05 1991 Karl Berry (karl at hayley)
* texware/{pl,tf}to{tf,pl}.ch, mfware/gftodvi.ch: declare verbose
as an integer, not a boolean.
Wed May 1 17:04:03 1991 Karl Berry (karl at hayley)
* texware/pltotf.ch (Constants): increase some sizes some more.
Wed Apr 17 11:26:55 1991 Karl Berry (karl at hayley)
* man/Makefile (install): don't unconditionally do mkdir $(mandir).
Tue Apr 16 14:14:49 1991 Karl Berry (karl at ra.cs.umb.edu)
* Version 5.84b.
* README.W2C: remove reference to bigbibtex.ch.
* dviutil: new dvicopy.web and dvicopy.ch from
xitikgun@ddathd21.bitnet.
Tue Apr 9 10:58:39 1991 Karl Berry (karl at ra.cs.umb.edu)
* common/texmf.c (do_undump) [REGFIX]: use a temporary so we can
use the & operator.
* MACHINES.W2C (Sun 4/470 and SunOS 4.1.1): from
casterln@are.berkeley.edu.
* Makefile (siteh): remove this.
(stamp-common): remove dependency on it.
Tue Apr 2 16:23:02 1991 Karl Berry (karl at ra.cs.umb.edu)
* Version 5.84a.
* web/tangleboot.c: bring up to date.
Tue Apr 2 13:28:35 1991 Karl Berry (karl at churchy.gnu.ai.mit.edu)
* common/endian.c: define the symbol `WEB2C_BIG_ENDIAN', since
<sys/machine.h> .
* common/texmf.c (do_dump, do_undump): use that name.
Tue Apr 2 09:52:55 1991 Karl Berry (karl at godwin)
* bibtex/bibtex.ch: make `big' BibTeX the default.
* common/extra.h (gargv): make declaration extern.
* web2c/web2c.c (ii): remove second declaration.
* web/tangle.ch, fontutil/vptovf.ch, mfware/gftype.ch,
texware/pltotf.ch: change version numbers in banner.
Thu Mar 28 14:28:01 1991 Karl Berry (karl at apple-gunkies)
* mf/Makefile (run-trap): specify the current directory to find
trap.tfm and trap.72270gf.
* all Makefiles: add alloca.o to the common object files.
* Makefile (triptrap): new dependency `stamp-common'.
* common/Makefile (endian.h): use `./endian', not just `endian'.
Tue Mar 26 14:05:00 1991 Karl Berry (karl at ds5000)
* Makefile (install-formats, install-bases): don't quit if the
mkdir fails on the installation directory.
* tex/tex.web, fontutil/pktogf.web: new versions.
* fontutil/pktogf.ch: change version number.
* Makefile (web2c): define as just `web2c', and rename the
directory. All the scripts use that name.
Tue Mar 26 13:48:36 1991 Karl Berry (karl at ra.cs.umb.edu)
* common/texmf.c (time): remove this declaration, since different
systems want a different return type. (from bush@evax.uta.edu)
Mon Mar 25 08:25:36 1991 Karl Berry (karl at hayley)
* Makefile (stamp-web2c): remove all dependencies.
* web2c: change directory name to include version number.
(web2c): new variable to define the name of the web2c directory.
Fri Mar 22 10:40:22 1991 Karl Berry (karl at hayley)
* common/extra.c (setpaths): use a string version of the
PATH_DELIMITER when concatenating paths.
(PATH_DELIMITER_STR): new macro.
* mf/MFwindow/x11-xt.c (mf_x11_updatescreen): remove redundant
stuff after #endif.
* web2c/{web2c.h,web2c.c}: remove redundant preprocessor definitions.
* web2c/web2c.c (my_output); don't always output a space after
every token. [no, rescind that, some sed scripts depend on the
existing form of output.]
* common/extra.c (getwd): don't initialize the automatic
structure; cc can't handle it.
* Makefile, */Makefile: use LDFLAGS at the beginning of linking
lines, and LOADLIBES at the end.
* COPYING.W2C: new file necessary for getopt; refer to it in
README.
Tue Mar 19 15:19:35 1991 Karl Berry (karl at hayley)
* mfware/gftopk.ch (open_pk_file): don't search backwards through
garbage for a `/' (found by mackay@cs.washington.edu).
* fontutil/pktogf.ch (open_gf_file): likewise.
Mon Mar 18 13:48:34 1991 Karl Berry (karl at hayley)
* {tex,mf}/Makefile ({tex,mf}-extra.o): remove the C file before
creating the link.
Fri Mar 15 10:41:22 1991 Karl Berry (karl at hayley)
* site.h-dist (SPRINTF_RETURN_TYPE): remove this; it's caused
about a zillion times more trouble than it's worth.
* mfware/gftodvi.ch: change default extension to `2602gf',
following dek's change for art.
* tex/ctex.ch: we're now at version 3.14.
(Also new versions of gftodvi.web and mf.web, but they don't
require any changes to the change files.)
Sun Feb 3 11:22:13 1991 Karl Berry (karl at hayley)
* mfware/gftodvi.ch: only print final newline if verbose.
Sat Feb 2 09:54:14 1991 Karl Berry (karl at hayley)
* tex/Makefile (etex.fmt): create the aux file before running initex.
These two changes from jmr@nada.kth.se make calling checked_fopen more
than once with the same argument (as happens with weave patgen.web
patgen.ch) work.
* common/extra.c (checked_fopen): leave the arg as a Pascal string.
* common/fileio.c (open_input): terminate the result that comes
back from checked_fopen with a null.
* common/texmf.h (dumpint): use do...while (0) to prevent syntax
errors.
* PROJECTS.W2C: remove the ones that have been implemented.
Sat Jan 19 15:44:26 1991 Karl Berry (karl at hayley)
* man/gftodvi.man: document the new options.
* */Makefile (commonh): add common.h to the list.
* common/common.h: include <math.h>.
* mfware/gftodvi.ch: implement -overflow-label-offset.
* common/extra.h (optiontable): another new abbreviation to help
in arg parsing.
* common/common.defines (strcmp, atof, optiontable): new
declarations.
* mfware/gftodvi.ch: changes to implement -verbose.
* most .ch files: fix the \title.
Mon Jan 14 09:28:20 1991 Karl Berry (karl at hayley)
* mf/Makefile (inimf): don't depend on $(windowlib), and don't
link with $(libs); it just wastes disk space.
* common/texmf.c [INI]: undefine all window symbols.
* man/dvitype.man: fix mismatched parentheses.
* man/tftopl.man: document the new option and the path searching.
* common/extra.c (make_c_string): replace spurious call to
`space_terminate' with `null_terminate'.
* texware/tftopl.ch: changes to implement -verbose; also write to
stdout if no output file is specified; also call set_paths
to do path searching for the TFM file.
* texware/pltotf.ch (usage): remove; just print it inline.
Sun Jan 13 16:57:01 1991 Karl Berry (karl at hayley)
These changes from ken@csis.dit.csiro.au:
* site.h: add TANDY as a possibility.
* defaults.h (FILENAMESIZE) [TANDY]: define to be smaller.
* common/extra.c (end_with_null, end_with_space): rename to
`null_terminate' and `space_terminate'.
* common/texmf.c (interrupt_handler): rename to `catch_interrupt'.
* web/tangle.ch (web_file_name, change_file_name): rename to
`web_name' and `chg_name'.
* web2c/web2c.yacc (function_return_type): rename to
`fn_return_type'.
Sun Jan 6 13:41:08 1991 Karl Berry (karl at hayley)
* site.h: remove HAVE_GETWD -- now we supply our own.
* Makefile (x11lib): don't include -lXext.
* common/main.c (argv): check if we're beyond the end of argv.
* texware/pltotf.ch: changes for silent running unless `-verbose'
is specified.
* common/extra.h (address_of_int): rename to addressofint.
Fri Jan 4 15:38:40 1991 Karl Berry (karl at hayley)
* man/Makefile (sedscript): use _ in the patterns, so
`TEXFONTS_SUBDIR' et al. work. (from drl@vuse.vanderbilt.edu)
Sat Dec 29 13:52:41 1990 Karl Berry (karl at hayley)
* mfware/gftodvi.ch (Finish the \.{DVI}...): print a newline
before exiting.
* mfware/gftodvi.ch (Get ready to convert...): add only 1 inch
before typesetting the overflow labels.
* common/main.c (gargv): do not make static.
* common/extra.h (gargv): declare.
* common/extra.c (getwd, checked_{{open,ch}dir,{l,}stat): new
routines to find the pathname of the current directory.
Wed Dec 26 09:21:56 1990 Karl Berry (karl at hayley)
* mfware/gftodvi.ch: put the progress report back in.
Mon Dec 17 09:35:24 1990 Karl Berry (karl at hayley)
* README.W2C (Online output from MF): we have two versions of the
Suntools support now; mackay@cs.washington.edu sent one based on
the Sunview definitions, instead of gfx_hs.
* *.WEB2C: rename to *.W2C for compatibility with the Unix TeX
distribution.
* common/extra.c (getwd): new routine.
* site.h-dist (HAVE_GETWD): remove this definition; now everybody
has it.
* site.h-dist (FUNNY_CORE_DUMP): new symbol to make core dumps for
a preloaded TeX or MF by giving a strange filename.
* common/{extra,fileio}.c: use FUNNY_CORE_DUMP, instead of BSD,
for the condition.
Sat Dec 8 13:01:18 1990 Karl Berry (karl at hayley)
* {tex,mf}/Makefile ({tex,mf}-extra.o): make a link to $(extrac)
and compile it, instead of compiling $(extrac), so that parallel
computation work properly.
* tex/Makefile (latex.fmt, slitex.fmt): the files are called
`lplain' and `splain' again, instead of `lplain3' and `splain3'.
Thu Nov 29 10:54:55 1990 Karl Berry (karl at hayley)
* man/tex.man: don't put @TEXINPUTS@ at the beginning of a line,
since it might start with `.' (from
kabal@aldebaran.insl.mcgill.ca).
Tue Nov 20 10:21:43 1990 Karl Berry (karl at hayley)
* MACHINES: add info for ESIX on a 386, from uri@ibm.com.
Mon Nov 19 07:04:10 1990 Karl Berry (karl at hayley)
* texware/pltotf.ch (System-dependent changes): parse arguments
using getopt.
* common/common.defines (gargv, optind, getoptstruct,
getoptlongonly, addressofint, name, hasarg, flag, val): new
definitions.
* common/extra.h (addressofint, hasarg, getoptlongonly): new
definitions.
Sun Nov 18 08:22:18 1990 Karl Berry (karl at hayley)
* common/texmf.c (initscreen): use the MFTERM envvar, if set, to
determine the user's desired display type.
* man/mf.man: document this.
* common/texmf.c (do_dump): swap the bytes in memory back again
after dumping, since we use some of those values.
* web2c/web2c.yacc (P_F_DEC_PART): allow this to be empty.
* tex/ctex.ch (\input, \openin changes): allow names like
`foo.bar.tex', and look for `foo' before `foo.tex'.
* common/texmf.c (swap_items): new routine.
(do_dump, do_undump): call it, instead of doing bit operations to
pack and unpack the bytes.
* common/endian.c: new file.
* common/Makefile (endian.h): new target.
(all): make endian.h.
* tex/Makefile, mf/Makefile (extrah): add endian.h to the definition.
Tue Nov 13 07:29:45 1990 Karl Berry (karl at hayley)
* common/extra.c (setpaths): use PATH_DELIMITER instead of ":".
Wed Nov 7 06:44:01 1990 Karl Berry (karl at hayley)
* common/texmf.c (do_dump): handle dumping 8-byte and 2-byte items.
(dump_four): new routine.
* mf/cmf.ch (clear_terminal): define to do nothing.
* tex/ctex.ch (clear_terminal): likewise.
Tue Nov 6 15:02:51 1990 Karl Berry (karl at hayley)
* common/texmf.h ((un)dumpthings): call new routines, do_(un)dump.
* common/texmf.c (do_(un)dump): define them to always write and
read BigEndian files.x
* common/texmf.h (generic_(un)dump): call (un)dumpthings.
These changes from rusty@belch.berkeley.edu:
* web/Makefile (veryclean): remove tangle.h.
* web2c/Makefile (clean): remove lex.yy.c.
* Makefile (LN): new variable.
(triptrap): pass LN down.
* mf/Makefile, tex/Makefile: use $(LN) instead of `ln'.
* site.h-dist (schar) [ANSI]: define to be signed char (from
lgy@newton.phys.washington.edu).
Sun Nov 4 09:32:55 1990 Karl Berry (karl at hayley)
* README.WEB2C: Advertise TUG.
* mf/Makefile (cmmf.base): input cmbase, not cm.
* These changes suggested by chris@mimsy.umd.edu:
* common/texmf.c (bsd_clear_terminal, bsd_wake_up_terminal):
remove these, since the user should control the terminal.
* common/texmf.h (same) [BSD]: remove ifdef's that used
those routines.
* tex/ctex.ch (clear_terminal): define to do nothing.
* common/texmf.c: do not include <sys/fcntl.h>, since we don't
use the fcntl system call.
Thu Nov 1 08:53:47 1990 Karl Berry (karl at hayley)
* bibtex/Makefile (bibtex.o): do -Dbswap=bswapp.
* mfware/Makefile (mft.o): do -Dlink=link_array.
* Makefile (INSTALL): use -c, for Ultrix's sake.
* install: explicitly exit 0 if $(bindir) et al. exist (from
dick@sprite.stanford.edu).
Tue Oct 30 09:08:47 1990 Karl Berry (karl at hayley)
* tex/ctex.ch (@<Declare act...) (for \openin): try to open the
file without the .tex extension.
* tex/bigtrie.diff: new file (from jmr@nada.kth.se).
Thu Oct 25 08:56:19 1990 Karl Berry (karl at hayley)
* tex/trie.diff (trie): line got truncated at 80 characters (from
piet@cs.ruu.nl).
Tue Oct 23 09:17:57 1990 Karl Berry (karl at hayley)
* common/texmf.c (input_line, calledit): break lines longer than
80 characters.
Sat Oct 20 11:13:04 1990 Karl Berry (karl at hayley)
* common/texmf.c (initscreen) [!TRAP]: cosmetic changes.
* common/extra.c (string_copy): declare in the old C style, not
the new.
* tex/trie.diff: update to new version.
Fri Oct 19 17:38:55 1990 Karl Berry (karl at claude)
* bibtex/convert: put the sed commands that change (pdstype) to
(buftype) back.
* bibtex/Makefile (bibtex.c): make it depend on `convert'.
* Makefile (BibTeX): new target.
Fri Oct 12 13:03:58 1990 Karl Berry (karl at spiff.ai.mit.edu)
* Version 5.8a.
* mf/fixcoerce.h: restore redefinition of tfmqqqq.
* common/convert: set a variable to `basename $pascalfile .p`.
* common/extra.c (do_subdir_path): assign result of expand_colon
to dir_list, not temp.
* web2c/fixwrites.c (main): fix output for pltotf.
Wed Oct 10 16:41:54 1990 Karl Berry (karl at spiff.ai.mit.edu)
* web2c/fixwrites.c [ANSI] (bare): give definition as a char.
Sun Oct 7 05:02:58 1990 Karl Berry (karl at sprite)
* common/extra.h (abs): cast the operands to integer, so the tests
on quarterwords in Metafont work properly (it took three days to
find this one...argh).
Wed Oct 3 14:17:32 1990 Karl Berry (karl at sprite)
* common/extra.c (S_ISDIR): define if it's not defined, instead of
if we're not _POSIX_SOURCE.
* web2c/fixwrites.c [ANSI] (bare): give prototype as a char.
Wed Oct 3 15:20:34 1990 Karl Berry (karl at hal)
* tex/Makefile (clean): remove .fmt and .aux files here.
* mf/Makefile (clean): remove .base files here.
* web/Makefile (tangle.p): add an extra sh -c for the sake of the
broken AIX sh; also, add $(CFLAGS) to the tangleboot compilation.
Mon Oct 1 10:14:51 1990 Karl Berry (karl at aten)
* web2c/fixwrites.c: don't extern strcpy et al.
* mfware/gftopk.ch: fix bobble in banner.
Wed Sep 26 05:56:36 1990 Karl Berry (karl at hayley)
* common/extra.c (S_ISDIR) [!_POSIX_SOURCE]: define S_ISDIR correctly.
* common/extra.c (expand_colon): new routine.
(do_path, do_subdir_path): call it.
Tue Sep 25 07:24:58 1990 Karl Berry (karl at hayley)
* common/extra.c (do_path): don't copy from temp if it's null.
* Makefile (install, install-formats, install-formats): do test -d
before running mkdir.
* Makefile (web-dist, web2c-dist): use the name src-$(version) for
the top-level directory.
* tex/Makefile (run-trip), mf/Makefile (run-trap): throw away the
output from the first run.
* web2c/{web2c,splitup}.c: declare argc as an int.
* new versions of the web files from DEK, and hence new versions
of the change files.
Sun Sep 23 06:24:01 1990 Karl Berry (karl at hayley)
* bibtex/Makefile (bibtex); put LDFLAGS at the end.
* mfware/Makefile (gftodvi): missing ).
Sat Sep 22 07:38:02 1990 Karl Berry (karl at hayley)
* common/extra.c (do_path): don't replace extra :'s in the middle
of the paths.
(insert_string): delete.
* site.h (TEXFONTS_SUBDIR, ...): new symbols.
* common/extra.c (setpaths): use them.
(do_subdir_path): new routine.
(do_path): remove subdirectory stuff.
* common/fileio.c (open_output): test *f, not f, to see if the
open succeeded.
* common/texmf.c [HANDLE_INTERRUPTS]: include <sys/types.h>, if
POSIX.
* web2c/fixwrites.c: use FILENAMESIZE to define `filename'.
* web/Makefile (tangle.p): missing a $.
* common/extra.c (S_ISDIR): new macro.
(is_dir): use it.
* common/common.h: new file.
* web2c/web2c.h: include it.
* common/extra.h: include it.
* web2c/fixwrites.c: include it.
* web2c/Makefile (web2cl.c): prepend site.h before the lex output,
so flex.skel will have the preprocessor symbols defined.
* web2c/Makefile (fixwrites, splitup, regfix): use LDFLAGS in
addition to CFLAGS.
* Makefile (stamp-web2c): make this depend on the web2c
executables, as well as the sources.
* site.h: another possibility for the OS is POSIX.
* web2c/web2c.h [ANSI]: don't declare sprintf if ANSI or
_POSIX_SOURCE is defined.
[FLEX]: change conditional symbol to FLEX_SCANNER.
* web2c/Makefile (web2c): include LEXLIB, not -ll.
* web2c/splitup.c: include web2c.h, instead of redefining TRUE,
FALSE, sprintf, and the like.
* common/extra.c (setpaths): use the symbol VFFONTS to initialize
the envvar if it is defined.
site.h: put in a prototype definition for VFFONTS.
Tue Sep 18 16:45:04 1990 Karl Berry (karl at hayley)
* Makefile (web-dist): make the directory of the tar file be
web2c-<version>, not just `web2c'.
* common/fileio.c (open_output): try to open the file in the dir
specified by TEXMFOUTPUT, if opening it in the cwd fails
(suggested by lgy@newton.phys.washington.edu).
* man/{tex,mf,bibtex}.man: document this.
Sun Sep 16 07:50:08 1990 Karl Berry (karl at hayley)
* README, PROBLEMS, PROJECTS: rename with .WEB2C suffix, to be
closer to what's on the Unix TeX tape.
Thu Sep 13 07:09:18 1990 Karl Berry (karl at hayley)
* Makefile (install-manpages): pass SITEDIR in.
* man/Makefile (sedscript): remove dependency on
$(SITEDIR)/Makefile. (These changes from alien@essex.ac.uk.)
* tex/bigtex.diff, mf/bigmf.diff: don't increase max_quarterword,
thus perhaps saving some memory (from morgan@ics.uci.edu).
Tue Sep 11 06:42:43 1990 Karl Berry (karl at hayley)
* common/extra.c: don't give getcwd a prototype unless ANSI is
defined (from maj@computer-lab.cambridge.ac.uk).
Thu Sep 6 05:56:20 1990 Karl Berry (karl at hayley)
* Makefile (x11lib), mf/Makefile (x11lib): include Xext.
Tue Sep 4 09:45:54 1990 Karl Berry (karl at hayley)
* Makefile (install*): use $(proginstall) or $(fileinstall), as
appropriate.
(fileinstall, proginstall): new variables.
Sun Sep 2 15:51:35 1990 Karl Berry (karl at hayley)
* site.h-dist (HAVE_GETWD): new option for people who are
fortunate enough to have this.
* common/extra.c (getcwd) [HAVE_GETWD]: define this in terms of
getwd (from morgan@ics.uci.edu).
Fri Aug 31 15:17:19 1990 Karl Berry (karl at hayley)
* These changes from andy@csvax.cs.caltech.edu.
* mf/MFwindow/tek.c [SYSV]: define bzero and bcmp as memset and
memcmp.
* common/extra.c: always include <sys/types.h> and <sys/stat.h>,
since is_dir needs them.
* */Makefile (link commands): put $(LDFLAGS) at the end of the
command, instead of the beginning.
* web/Makefile (tangle.p): use an already-compiled tangle if
possible, and include LDFLAGS instead of CFLAGS when making tangle
from tangleboot.c.
* site.h-dist (ANSI): say they must have sprintf declared if they
defined this.
Thu Aug 30 15:58:05 1990 Karl Berry (karl at hayley)
* These changes from andy@csvax.cs.caltech.edu.
* dviutil/dvicopy.ch: don't define cur_name to use text_char.
* web2c/fixwrites.c: declare bare to take an int, not a char, and
define it to return an int.
* common/extra.h, web2c/web2c.h, web2c/splitup: only declare
sprintf if ANSI is not defined, since a prototype with `...'
doesn't match a function without a prototype.
Sun Aug 26 10:45:48 1990 Karl Berry (karl at aten)
* Version 5.0e.
* Makefile (install-manpages): quote $(INSTALL).
* man/Makefile (all, install): make dependent on stamp-manpages, so
sed isn't invoked every time.
(clean): remove stamp-manpages.
* MACHINES: add info for the HP9000 machines from
mark@comp.vuw.ac.nz.
Sat Aug 25 12:00:50 1990 Karl Berry (karl at hayley)
* Makefile (alldirs): add `dviutil'.
(install): install dvicopy.
* common/extra.c (do_path): add a null after the path delimiter.
* dviutil/dvicopy.ch: restore lines truncated in transmission.
* dviutil/Makefile: prepend `.' to suffix lines.
Thu Aug 23 06:44:28 1990 Karl Berry (karl at claude)
* {tex,mf}/Makefile (triptex, trapmf): make dependent on $(iobjs)
and $(commono).
* common/extra.c (do_path): don't take strlen of an integer.
* web2c/Makefile (veryclean): remove yacc.*.
Wed Aug 22 06:16:03 1990 Karl Berry (karl at hayley)
* Makefile (FORMATINSTALL): new variable; defines installation
commands for .fmt's and .base's.
* common/extra.c (do_path): use PATH_DELIMITER instead of ':'.
* {tex,mf}/Makefile: use tex.fmt and mf.base when making other
formats or bases.
* Makefile (YACC, LEX): new variables.
(stamp-web2c): pass them down when compiling web2c.
* common/extra.c (do_path): do chdirs to the directories in the
path.
* common/extra.{c,h} (ztoint) [sequent]: remove this, since
the Sequent compiler doesn't have the casting problem any more.
Thu Aug 16 15:24:02 1990 Karl Berry (karl at apollo)
* common/extra.c (do_path): don't look for subdirectories if we
used the default value (sometimes).
* common/extra.c (do_path): only look for subdirectories
conditionally.
(setpaths): don't look for subdirectories in all paths.
* common/extra.c (do_path): don't clobber the path as we check for
subdirectories.
* tex/Makefile (run-trip), mf/Makefile (run-trap): remove
trip.tex/trap.mf before linking
Wed Aug 15 08:45:28 1990 Karl Berry (karl at hayley)
* web/tangleboot.{pas,c}: update these.
* Makefile (install-formats, install-bases, install): move the
commands for the first two from the third.
* mfware/mft.ch (open_input): use MF_INPUT_PATH to open the .mf
file.
* man/mft.man: document this.
* site.h (MAXPATHLEN): remove this; we allocate the storage
dynamically now.
* man/{tex,mf}.man: don't refer to MAXPATHLEN.
* common/extra.c (xmalloc, xrealloc): new routines.
* common/extra.c (do_path): find all the subdirectories here, and
add them to the path.
(testreadaccess): remove the subdirectory checking here.
* tex/ctex.ch (\S552): initialize bchar_label[null_font], et al.,
to avoid arbitrary font_info data as being interpreted as lig/kern
programs (from Chris Thompson).
* common/extra.c (setpaths): take an argument saying which paths
to initialize.
* common/common.defines (setpaths): declare to be a procedure with
parameters.
* common/extra.h (...PATHBIT): new macros to define that argument.
* common/common.defines (...PATHBIT): make them available to the
change files.
* bibtex/bibtex.ch (get_the_top_level_aux_file_name),
fontutil/pktogf.ch (PK_to_GF), pktype.ch (PKtype), vftovp.ch
(VFtoVP), mfware/gftodvi.ch (GFtoDVI), gftopk.ch (initialize),
gftype.ch (initialize), mft.ch (scan_args), texware/dvitype.ch
(DVItype), dviutil/dvicopy.ch (DVIcopy), mf/cmf.ch, tex/ctex.ch:
change call to set_paths.
* common/{extra.c, extra.h, common.defines): define another
path-searching constant, VFFILEPATH, which uses the environment
variable VFFONTS.
* dviutil: new subdirectory to hold dvicopy, whose change file
uses VFFILEPATH (from xitikgun@ddathd21.bitnet).
* fontutil/vftovp.ch: use VFFILEPATH.
* man/vftovp.man: document this.
* common/{extra,fileio}.c (terminate_with_space,
terminate_with_null): rename to `end_with_space' and
`end_with_null', so brain-dead linkers that only look at the first
16 characters don't break.
Tue Aug 14 11:32:35 1990 Karl Berry (karl at aten)
* common/extra.c (do_path): allocate an extra byte for the
trailing null.
Mon Aug 13 14:45:06 1990 Karl Berry (karl at aten)
* Makefile (fmts): add picplus.
* tex/Makefile (fmts): likewise.
* man/Makefile (manfiles): remove trailing \ from last item in list.
* {bibtex,mf,tex}/Makefile: remove form feeds.
Sun Aug 12 10:23:12 1990 Karl Berry (karl at hayley)
* web/tangle.ch (scan_args): if a `.' occurs before a `/' in a
filename, don't count it as starting the extension.
* web/weave.ch (scan_args): likewise.
Probably other programs need to be fixed in the same way.
* common/convert: pass the name of file being converted to
fixwrites.
* web2c/fixwrites.c: convert vptovf error messages properly.
(These changes from rokicki@neon.stanford.edu.)
Fri Aug 10 09:02:31 1990 Karl Berry (karl at hayley)
* mf/cmf.ch: fix another casting problem (from
xitikgun@ddathd21.bitnet).
Wed Aug 8 06:43:28 1990 Karl Berry (karl at hayley)
* common/extra.c (DO_PATH): replace this macro with a routine, and
expand extra `:'s into the system default.
(insert_string): new routine.
* site.h: warn them not to put extra `:'s in the system default.
* man/{almost everything}: document this.
* mfware/gftodvi.ch, fontutil/vftovp.ch: break up huge case
statement (from maj@computer-lab.cambridge.ac.uk).
* PROBLEMS: remove old fix for the huge case statements.
Tue Aug 7 07:19:32 1990 Karl Berry (karl at hayley)
* mf/Makefile (run-trap): run `./trapmf', not just `trapmf'.
* tex/Makefile (run-trip): analogously.
* Makefile (web2c-dist): rename site.h to site.h-dist.
(These changes from dorab@twinsun.com.)
Fri Aug 3 15:55:53 1990 Karl Berry (karl at hayley)
* Makefile (install): add links for plain.fmt and plain.base.
* PROBLEMS: add patches for the 3b2 for the old TeX (from
oc@vmp.com).
Tue Jul 31 11:43:38 1990 Karl Berry (karl at hayley)
* mf/Makefile: add missing quote (from dick@sprite.stanford.edu).
Fri Jul 13 06:48:15 1990 Karl Berry (karl at hayley)
* Makefile: remove ^L's.
Sun Jul 8 06:44:06 1990 Karl Berry (karl at hayley)
* common/extra.c (fprint_pascal_string): new routine.
(printpascalstring): call it.
(errprintpascalstring): new routine.
* common/common.defines: declare errprintpascalstring.
* texware/dvitype.ch: use it when printing the TFM file name.
* common/extra.c (READABLE_FILE): new macro.
(testreadaccess): use it, instead of using access(2) directly.
* tex/trie.h: delete.
* tex/trie.diff: new file with diffs for a larger trie size (from
xitikgun@ddathd21.bitnet).
* common/texmf.defines: remove trie definitions.
* bibtex/bibtex32.diff: new file with diffs for a big BibTeX (from
beebe@science.utah.edu).
* mf/trapenv: define GFFONTS.
Mon Jun 18 08:37:41 1990 Karl Berry (karl at hayley)
* site.h (schar) [AIX]: define to be INT.
* web2c/web2c.yacc (SIMPLE_TYPE): output UNSIGNED_SHORT_STRING
instead of "unsigned short", and define the former to be "int" for
AIX.
Thu May 31 14:14:18 1990 Karl Berry (karl at aten)
* common/fileio.c (open_input): don't call funny_core_dump if
we're bibtex.
* common/extra.c (is_dir): don't declare as static.
* web2c/{fixwrites,regfix}.c (remove_newline): don't use
ANSI-style declarations.
* mf/MFwindow/x11-Xt.c: declare functions as static, if they're
defined that way.
* mf/MFwindow/x10.c (sprintf): don't declare it.
* common/texmf.c (funny_core_dump): don't define as static.
* web/tangle.ch: incorporate changes to only open the pool file if
it's actually used (from xitigkun@ddathd21.bitnet).
Wed May 30 07:10:10 1990 Karl Berry (karl at hayley)
* common/extra.c (testreadaccess): initialize ok to zero, improve
the loop logic.
Sun May 27 10:21:22 1990 Karl Berry (karl at hayley)
* common/extra.h, web2c/splitup.c, web2c/web2c.h: declare sprintf
using SPRINTF_RETURN_TYPE.
* site.h: define it.
Sat May 26 07:55:54 1990 Karl Berry (karl at hayley)
* common/texmf.c (input_line): do not worry about NONASCII or
characters going out of range when we fill up `buffer'.
* web2c/{fixwrites,regfix}.c: replace calls to gets(3) with calls
to fgets(3).
* tex/trie.h: new file to help implement larger hyphenation tries.
* common/common.defines (trl, trc, tro, trb, trieentry): new
fields and a type, for the same reason.
(from xitikgun@ddathd21.bitnet, but the diff to ctex.ch has not
been created yet).
* common/texmf.c, mf/MFwindow/uniterm.c: merge Uniterm support
from T. Hageman.
Tue May 22 09:56:01 1990 Karl Berry (karl at hayley)
* common/extra.c (testreadaccess): close the directories in the
path after we search them for subdirectories.
* tex/tex-extra.c (main): set up TEXformatdefault with the format
from the program name, instead of the first line of input (from
ramshaw@src.dec.com).
Sun May 20 12:03:12 1990 Karl Berry (karl at hayley)
* web/tangle.ch (<Get |web_file_name|...>): make sure the web name
ends with a space. Ditto for the change file.
Thu May 17 10:43:00 1990 Karl Berry (karl at hayley)
* web2c/web2c.c (initialize): check the result of the fopen (from
lonhyn@gulag.nas.nasa.gov).
Mon May 14 07:16:47 1990 Karl Berry (karl at hayley)
* texware/dvitype.ch: use testreadaccess and other common
routines; output to stdout.
* web/{tangle,weave}.ch: use common routines.
* fontutil/{extra.?, futil.defines, convert}: move to new
subdirectory `common'.
* tex/Makefile (run-trip): set the environment before running
triptex.
tripenv: new file.
* mf/Makefile, mf/trapenv: analogously.
Sun May 13 10:09:02 1990 Karl Berry (karl at hayley)
* web2c/web2c.c (main): only print the number of symbols if
`debug' is set.
* texware/texware.h (unsignedcharargv): new macro for dvitype.
* {texware/texware.h, mfware/mfware.h} (reset, rewrite): cast the
filename argument to char *.
* web2c/web2c.yacc (do_proc_args): add an & if we're generating
ANSI code, and have a var parameter (from andy@csvax.caltech.edu).
* defaults.h [High C on an IBM]: add pragma's (from bells@ibm.com).
* tex/ctex.ch (a_open_in): try to open the input file without
.tex, if opening with .tex fails (from Tom Hageman via
vens@hgrrug5.bitnet).
* {mf,tex}/extra.c (calledit) [NONASCII]: use xchr (from Tom
Hageman via vens@hgrrug5.bitnet).
* Makefile (run-triptrap): split up into two targets, run-trip and
run-trap.
* tex/Makefile (fmts): new target.
(tex.fmt, et al.): run initex to make these.
* mf/Makefile (bases): new target.
(mf.base, cmmf.base): run inimf to make these.
(From beebe@science.utah.edu.)
* Makefile (manpages, install-manpages): new targets.
man: new directory with the man pages
(from ken@cs.rochester.edu).
* mfware/gftodvi.ch (open_gf_file): don't bother defining
packed_font_file_path, since we don't use it.
* mfware/gftype.ch (open_gf_file): ditto.
Sun May 6 08:24:27 1990 Karl Berry (karl at hayley)
(All the following from andy@csvax.caltech.edu)
* web2c/web2c.lex (input, unput): declare if they're not #defined.
* web/weavext.c (strcpy, strcat): add `const'.
* mfware/mfwarext.c (sprintf): declare differently for SYSV and ANSI.
tex/extra.c, mf/extra.c, web/tanglext.c, texware/texwarext.c: ditto.
* mfware/mfware.h (openf) [ANSI]: declare it.
* fontutil/extra.c (testreadaccess): handle absolute path names
correctly.
* web/Makefile (tangle.p): do `./tangle' instead of `tangle',
since not everyone has . in their path (from
beebe@science.utah.edu).
Sat May 5 12:17:32 1990 Karl Berry (karl at hayley)
* texware/{pltotf,tftopl}.ch (main): don't print a newline at the
end.
* web2c/web2c.yacc (FUNCTION_HEAD): only print the function name
if debug is true.
* mfware/gftopk.ch (comment): increase array size by one, to leave
room for the trailing null.
* mfware/Makefile (CFLAGS): remove -Dlink=link_array.
Fri May 4 21:51:16 1990 Karl Berry (karl at hayley)
* mfware/gftodvi.ch (open_tfm_file): use tex_font_file_path, not
generic_font_file_path (from morgan@ics.uci.edu).
Fri Apr 27 07:22:50 1990 Karl Berry (karl at hayley)
* Makefile (install): make work with install, not just cp (from
grunwald@foobar.colorado.edu).
* tex/ctex.ch: define hash_size and hash_prime, so that LaTeX
works with the small TeX.
* web2c/web2c.c [HP]: yytext is an unsigned char (from
pfs@kc.abdn.ac.uk).
* mf/extra.c (calledit): remove the xor with 0x80.
* site.h: warn about bibtex and -DANSI not mixing.
Wed Apr 18 11:44:49 1990 Karl Berry (karl at aten)
* Version 5.0c. (5.0b was released by Tim.)
* web/Makefile: (.ch.p): invoke ./tangle instead of `tangle'.
* site.h: change default glueratio to `float'.
* web/Makefile (tangle.p): put the ``until...done'' in an sh -c,
for the sake of Ultrix (from maj@computer-lab.cambridge.ac.uk).
* PROBLEMS: add patch for yacc problem (from justin@crim.ca).
Mon Apr 16 08:03:52 1990 Karl Berry (karl at hayley)
* site.h: do not unconditionally (un)define the symbols.
Thu Apr 12 21:33:41 1990 Karl Berry (karl at hayley)
* tex/extra.c (calledit): do not xor with 0x80 (from
ekrell@ulysses.att.com).
Fri Apr 6 20:40:20 1990 Karl Berry (karl at hayley)
* {tex,mf}/extra.c (zinputln): have to test against 255, not 127.
* web/Makefile: touch tangle.h (from colin@umist.ac.uk).
Wed Apr 4 16:10:03 1990 Karl Berry (karl at aten)
* PROBLEMS: cc and gftodvi/vftovp don't mix.
Thu Mar 29 07:50:15 1990 Karl Berry (karl at mole.ai.mit.edu)
* Version 5.0a (with ken's changes to the change files).
Tue Mar 27 08:01:20 1990 Karl Berry (karl at hayley)
* web2c/web2c.yacc (FUNCTION_HEAD): check for debug before
printing out the function name.
* texware/Makefile (pltotf): don't put this on two lines.
Fri Mar 23 18:46:49 1990 Karl Berry (karl at aten)
* Version 4.893c.
* web2c/Makefile: do test ... instead of [ ... ].
mf/MFwindow/Makefile: use $(SHELL) instead of /bin/sh.
Thu Mar 22 18:20:38 1990 Karl Berry (karl at aten)
* texware/dvitypext.c: declare packrealnameoffile to be void, even
if ANSI is not defined, else Ultrix loses.
Fri Mar 9 08:38:56 1990 Karl Berry (karl at hayley)
* defaults.h, site.h: move ANSI from the former back to the
latter, since some systems want it.
* bibtex/bibtex.ch (int_to_ASCII): use `the_int' instead of `int'
as the first parameter name; some cc's bomb with `int'.
(from rusty@garnet.berkeley.edu)
* texware/dvitypext.c (packrealnameoffile): return type is void.
* */Makefile (veryclean): remove backup files, core files.
*/Makefile: use $(SHELL) ./<script> instead of ./<script>.
web/Makefile: define SHELL.
(mackay@cs.washington.edu supplied these changes.)
Fri Mar 2 17:27:22 1990 Karl Berry (karl at hayley)
* texware/dvitype.ch: make input be 8 bits, like the rest of the
programs.
Sun Feb 25 20:36:19 1990 Karl Berry (karl at hayley)
* {mf,tex}/ini_to_tr[ai]p: save the .h file we're editing.
Thu Feb 22 21:06:49 1990 Karl Berry (karl at hayley)
* */Makefile: change $(RM) to rm.
* texware/texware.h: do not cast the result of getc to char, for
the sake of Ultrix.
Sat Feb 17 07:36:50 1990 Karl Berry (karl at hayley)
* README: Make the instructions for bootstrapping tangle correct.
* Makefile (dist): tangleboot.pas is in web, not web2c.
* {mfware,texware,web,web2c}/Makefile: remove $(CFLAGS) from the
load lines.
* bibtex/bibext.c: move conditional on BSD to after #include
"site.h" (from bsuggs@hac.arpa.com).
* web2c/Makefile (web2cy.c): do `-if', since one of the commands
exits with bad status under Ultrix.
bibtex:
Mon Feb 21 14:49:52 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: srcdir changes from simon.
Wed Feb 2 11:00:09 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Mon Jan 24 07:33:17 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Sun Nov 7 14:26:23 1993 Karl Berry (karl@cs.umb.edu)
* convert: Remove call to sync.
Fri Nov 5 15:50:55 1993 Karl Berry (karl@cs.umb.edu)
* bibtex.ch (option_index): Declare as int.
Tue Oct 12 14:07:15 1993 Karl Berry (karl@cs.umb.edu)
* bibtex.ch (verbose): Declare as int.
Sun Oct 3 12:41:46 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (cbibtex.ch): Don't chmod 444.
(commonh): paths.h is in kpathsea.
(commono): kpathsea.a has its own variable now.
(*clean): Include standard targets.
(program): New variable.
Sun May 23 06:17:53 1993 Karl Berry (karl@cs.umb.edu)
* bibtex.ch (max_bib_files): Increase to 1000.
Sun May 9 10:10:01 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Remove $(srcdir) for paths.h.
(commono): Add kpathsea library.
Fri Apr 30 15:07:24 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Add paths.h.
Sat Apr 10 16:41:18 1993 Karl Berry (karl@cs.umb.edu)
* convert: Don't sync unless /bin/sync exists.
Fri Apr 9 16:07:24 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Define as config.h.
Thu Mar 25 16:59:08 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (openinout.c): Remove the file before making the link.
Sat Mar 13 11:44:46 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (CPPFLAGS): Add @DEFS@, for -DHAVE_CONFIG_H.
* convert: Use cpascal.h instead of pascal.h.
Sun Feb 21 08:27:23 1993 Karl Berry (karl@cs.umb.edu)
* Version 5.851d.
Fri Feb 19 13:21:01 1993 Karl Berry (karl@cs.umb.edu)
* small.sed (max_ent_strs): Restore to 3000.
Tue Feb 16 17:53:06 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec, install-data): New targets.
Mon Feb 15 12:06:14 1993 Karl Berry (karl@cs.umb.edu)
* bibtex.ch (27): Allow any character as input.
Tue Jan 26 17:09:10 1993 Karl Berry (karl@cs.umb.edu)
* bibtex.ch (banner): Use version_string.
Sun Jan 3 13:28:45 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
Thu Dec 17 07:36:44 1992 Karl Berry (karl@cs.umb.edu)
* bibtex.ch (198): @d int == `the_int', instead of doing the
substitution ourselves.
* bibtex.ch: Move command-line processing to the existing section
that handles it.
* Makefile.in (libs): $(fileio) => $(fileioo).
Wed Dec 16 18:03:32 1992 Karl Berry (karl@cs.umb.edu)
* bibtex.ch: Put in option parsing; make min_crossrefs a variable,
instead of a constant.
Sun Dec 13 14:24:35 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (c-sources): New target.
Sat Dec 12 14:07:37 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
* small.sed: New file to replace small.diff.
Mon Nov 16 08:09:07 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (cbibtex.ch): New target. (Copy from bibtex.ch.)
* bibtex.ch (lex_class): Make RET be white_space.
Sun Nov 1 16:20:05 1992 Kathy Hargreaves (letters@red.cs.umb.edu)
* bibtex.ch (max_bib_files): increase to 100.
Thu Sep 24 11:04:03 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (openinout.c): avoid use of $<.
Fri Sep 4 08:58:58 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Wed Aug 19 08:39:55 1992 Karl Berry (karl@hayley)
* Makefile (openinout.c): new target.
(clean): remove it.
Wed Aug 12 16:16:28 1992 Karl Berry (karl@hayley)
* Makefile (fileioo): use the default compilation rule.
Wed Jul 15 11:52:40 1992 Karl Berry (karl@hayley)
* bibtex.ch, small.diff: don't change the value of min_crossrefs.
Sun Jul 5 07:23:23 1992 Karl Berry (karl@hayley)
* convert (sed): change `/bin/sed' to `sed'.
* bibtex.ch: avoid lines >= 80 chars.
Fri Jul 3 11:59:50 1992 Karl Berry (karl@hayley)
* Makefile (bibtex.p): depend on cbibtex.ch, not bibtex.ch.
Thu Jul 2 16:04:37 1992 Karl Berry (karl@hayley)
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Thu May 14 19:21:10 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Sat Apr 25 09:18:17 1992 Karl Berry (karl@hayley)
* convert: sync after the pipe.
* Makefile (libs): new var to abbreviate `../libs.a $(LIBS)'.
(bibtex): use it.
* Makefile (distclean): new target.
Thu Apr 23 12:07:32 1992 Karl Berry (karl@hayley)
* Makefile: fix clean targets (from Andreas).
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Sun Apr 12 11:46:24 1992 Karl Berry (karl@hayley)
* bibtex.ch: use BSTINPUTS to look for the BST file instead of
TEXINPUTS.
Sat Apr 11 10:31:57 1992 Karl Berry (karl@hayley)
* bibtex.ch (388): remove mutually exclusive test, instead of
fixing it.
Fri Apr 10 17:26:30 1992 Karl Berry (karl@hayley)
* small.diff: remake this so it works properly.
* Makefile (mostlyclean): remove cbibtex.ch.
(.ch.p): tangle with cbibtex.ch.
Fri Apr 3 09:53:25 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Mon Mar 30 11:20:11 1992 Karl Berry (karl at hayley)
* bibtex.ch (388): fix mutually exclusive tests.
Fri Mar 20 16:14:05 1992 Karl Berry (karl at hayley)
* Makefile (mostlyclean): new name for `clean'.
(clean): what `realclean' used to be.
(realclean): nothing to do anymore.
(install): install the program.
Fri Jan 24 09:08:31 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
* bibtex.ch (max_ent_strs): reduce to 10000, as the previous value
allocated 2.5MB (even this allocates 1MB).
Sun Jan 12 09:16:54 1992 Karl Berry (karl at hayley)
* Makefile (bibtex.o): remove -Dbswap=bswapp. Why did I do this?
* Makefile (fileioh): no longer exists.
* convert (../common): now ../lib.
Sat Jan 11 16:53:05 1992 Karl Berry (karl at hayley)
* bibtex.ch (FILENAMESIZE): rename to `PATH_MAX'.
* Makefile: redo for new configuration.
Tue Jan 7 16:09:55 1992 Karl Berry (karl at hayley)
* bibtex.ch (10/main program): exit with bad status if history >
warning_message.
Mon Feb 21 14:50:08 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: srcdir changes from simon.
Thu Feb 10 10:00:49 1994 Karl Berry (karl@cs.umb.edu)
* dvicopy.ch: Don't print fontname twice when it can't be opened.
Increase table sizes.
dviutil:
Wed Feb 2 11:00:09 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Mon Jan 24 07:33:33 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Tue Oct 12 13:35:28 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Simplify kpathsea references.
Sun Oct 3 12:56:06 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): paths.h is in kpathsea.
(commono): kpathsea.a has its own variable now.
(*clean): Include standard targets.
(program): New variable.
(install): Use it.
Fri May 21 14:08:08 1993 Karl Berry (karl@cs.umb.edu)
* dvitype.ch (open_{dvi,tfm}_file): Don't declare unused variable i.
Sun May 9 10:10:48 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Remove $(srcdir) for paths.h.
(commono): Add kpathsea library.
Fri Apr 30 15:07:41 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Add paths.h.
Fri Apr 9 16:07:39 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Define as config.h.
Sat Mar 13 12:10:31 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (CPPFLAGS): Add @DEFS@, for -DHAVE_CONFIG_H.
Sun Feb 21 08:27:57 1993 Karl Berry (karl@cs.umb.edu)
* Version 5.851d.
Tue Feb 16 17:53:43 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec, install-data): New targets.
Tue Jan 26 16:38:05 1993 Karl Berry (karl@cs.umb.edu)
* *.ch (banner): Use version_string.
* Makefile.in: Merge dvitype from texware.
Sun Jan 3 13:29:30 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
Sun Dec 13 14:25:12 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (c-sources): New target.
Sat Dec 12 14:52:23 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
Fri Sep 4 09:00:58 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Thu Jul 2 16:06:12 1992 Karl Berry (karl@hayley)
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Thu May 14 19:21:26 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Fri Apr 3 09:54:34 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Fri Mar 20 16:21:18 1992 Karl Berry (karl at hayley)
* Makefile (mostlyclean): new name for `clean'.
(clean): what `realclean' used to be.
(realclean): nothing to do anymore.
(install): install the program.
Fri Jan 24 09:21:22 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
Sun Jan 12 08:49:00 1992 Karl Berry (karl at hayley)
* dvicopy.ch: `cwd_test_read_access' is gone.
Following is the ChangeLog from texware, before I merged the contents
of that directory with the others. (26 January 1993)
Sat Jan 23 10:23:08 1993 Karl Berry (karl@cs.umb.edu)
* tftopl.ch: Output error messages to stderr.
Sun Jan 3 13:33:35 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
Fri Dec 18 13:16:08 1992 Karl Berry (karl@cs.umb.edu)
* tftopl.c (Set init...): Extend `tfm_name' with ".tfm" if necessary.
Sun Dec 13 14:28:24 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (c-sources): New target.
Sat Dec 12 15:23:14 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
Fri Sep 4 09:04:31 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Wed Aug 19 08:27:16 1992 Karl Berry (karl@hayley)
* Makefile (tftopl.o): use default compilation rule.
* pltotf.ch: rename `index' to `index_var'.
Wed Aug 12 16:34:13 1992 Karl Berry (karl@hayley)
* Makefile (pltotf.o): use default compilation rule.
Thu Jul 2 16:09:37 1992 Karl Berry (karl@hayley)
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Thu Jun 4 08:18:28 1992 Karl Berry (karl@hayley)
* {tftopl,pltotf}.ch: rename `class' to `class_var' because of AIX
brain-damage.
Thu May 14 19:22:33 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Sat Apr 25 09:38:16 1992 Karl Berry (karl@hayley)
* Makefile (distclean): new target.
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Fri Apr 3 09:56:04 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Sat Mar 21 11:40:36 1992 Karl Berry (karl at hayley)
* Makefile (patgen): use patgen2.
* patgen2.{web,ch}: new files.
Fri Mar 20 16:29:58 1992 Karl Berry (karl at hayley)
* Makefile (mostlyclean): new name for `clean'.
(clean): what `realclean' used to be.
(realclean): nothing to do anymore.
(install): install the program.
Wed Mar 18 09:09:54 1992 Karl Berry (karl at hayley)
* dvitype.ch (max_widths): increase to 25000.
Sun Feb 2 07:54:09 1992 Karl Berry (karl at hayley)
* tftopl.ch (argument_is): change `option_table' to
`long_options', for the new getopt.
Fri Jan 24 09:20:36 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
Sun Jan 12 07:49:54 1992 Karl Berry (karl at hayley)
* tftopl.ch: `cwd_test_read_access' is gone.
* Makefile (vftovp.o, vptovf.o): remove the -Dlink, as it is now
in common.h.
Wed Jan 8 07:43:23 1992 Karl Berry (karl at hayley)
* tftopl.ch (cast_to_pointer_to_byte): the name seems to be
`cast_to_byte_pointer'.
fontutil:
Mon Feb 21 14:30:23 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: srcdir changes from simon.
* gftodmem.h: Move to ../lib.
Wed Feb 2 11:00:09 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Mon Jan 24 07:33:41 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Sat Nov 6 13:46:52 1993 Karl Berry (karl@cs.umb.edu)
* vftovp.ch (out_char): Don't offset index into xchr by 31. From
dak@pool.informatik.rwth-aachen.de.
* tftopl.ch (Usage): Squeeze onto one line.
Fri Nov 5 15:49:15 1993 Karl Berry (karl@cs.umb.edu)
* {gftodvi,vftovp,vptovf,pltotf,tftopl}.ch (option_index): Declare
as int.
Tue Oct 12 14:07:42 1993 Karl Berry (karl@cs.umb.edu)
* gftodvi.ch (verbose): Declare as int.
* {pl,tf}to{tf,pl}.ch: Likewise.
* {vf,vp}to{vp,vf}.ch: Likewise.
Sun Oct 3 13:00:05 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): paths.h is in kpathsea.
(commono): kpathsea.a has its own variable now.
(*clean): Include standard targets.
(program): New variable.
(install): Use it.
Fri May 21 14:09:13 1993 Karl Berry (karl@cs.umb.edu)
* gf{type,topk}.ch (open_gf_file): Remove unused var j.
* pk{type,togf}.ch (open_pk_file): Likewise.
Fri May 14 14:36:50 1993 Karl Berry (karl@cs.umb.edu)
* tftopl.ch (index_var): Oops, that's a type, not a variable.
Sun May 9 10:10:51 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Remove $(srcdir) for paths.h.
(commono): Add kpathsea library.
Thu May 6 16:04:32 1993 Karl Berry (karl@cs.umb.edu)
* pktype.ch (53): Expand out writeln statement to avoid undefined
evaluation order problem.
Fri Apr 30 15:07:43 1993 Karl Berry (karl@cs.umb.edu)
* vptovf.ch, vftovp.ch, mft.ch (class): Rename to `class_var'.
* Makefile.in (commonh): Add paths.h.
Fri Apr 9 16:07:42 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Define as config.h.
Sat Mar 13 11:24:09 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (CPPFLAGS): Add @DEFS@, for -DHAVE_CONFIG_H.
* pktogf.ch (37): Do addition of 2 2^31's in two assignments, to
avoid compiler rearrangements.
Sun Feb 21 08:27:39 1993 Karl Berry (karl@cs.umb.edu)
* Version 5.851d.
Tue Feb 16 17:53:48 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec, install-data): New targets.
Tue Jan 26 16:19:58 1993 Karl Berry (karl@cs.umb.edu)
* *.ch (banner): Use version_string.
* Merge mfware and tftopl/pltotf.
Sun Dec 13 14:26:16 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (c-sources): New target.
Sun Jan 10 16:07:32 1993 Karl Berry (karl@cs.umb.edu)
* gftopk.ch (max_row): Increase to 100,000. (From Wayne Sullivan.)
Sun Jan 3 13:32:20 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
Sun Dec 13 14:27:45 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (c-sources): New target.
Sat Dec 12 14:59:21 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
Fri Sep 4 09:01:36 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Wed Aug 12 16:17:10 1992 Karl Berry (karl@hayley)
* {vf,vp}to{vp,vf}.ch (index): @d to be `index_type'.
* Makefile ({vf,vp}to{vp,vf}.o): use default compilation rule.
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Sun Jun 21 09:20:35 1992 Karl Berry (karl@io)
* vftovp.ch: don't compare o to set_char_0, since that's always true.
Thu May 14 19:21:32 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Fri Apr 10 15:13:27 1992 Karl Berry (karl@hayley)
* gftopk.ch (81--83): don't add anything to the font comment.
Fri Apr 3 09:54:48 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Thu Mar 26 07:00:04 1992 Karl Berry (karl at hayley)
* Makefile (clean): don't remove *.h, as gftodmem.h goes away.
Fri Mar 20 16:23:32 1992 Karl Berry (karl at hayley)
* Makefile (mostlyclean): new name for `clean'.
(clean): what `realclean' used to be.
(realclean): nothing to do anymore.
(install): install the program.
Sun Feb 2 08:01:42 1992 Karl Berry (karl at hayley)
* vftovp.ch (argument_is): use `long_options', not `option_table'.
* gftodvi.ch (argument_is): use `long_options' instead of
`option_table'.
Fri Jan 24 09:21:12 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
Sun Jan 12 07:49:14 1992 Karl Berry (karl at hayley)
* pktype.ch, pktogf.ch, vftovp.ch: `cwd_test_read_access' is gone.
* Makefile (vftovp.o, vptovf.o): remove the -Dlink, as it is now
in common.h.
* gftopk.ch, gftype.ch: `cwd_test_read_access' is gone.
mf:
Mon Feb 21 13:24:21 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: srcdir changes from simon.
Wed Feb 2 11:01:01 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Tue Feb 1 18:01:19 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (extrah): Include mfd.h and texmfmem.h here.
(commonh): No texmfmem.h here.
Mon Jan 24 07:34:01 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Mon Jan 17 14:30:09 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (iextra.o): Depend on mfd.h.
Sat Dec 11 13:23:35 1993 Karl Berry (karl@cs.umb.edu)
* convert: coerce.fix has been renamed coerce.add.
Sun Dec 5 15:22:43 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (windowlibs): Put x_extra_libs here.
(LIBS): Not here.
Sat Dec 4 16:51:57 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (*objs): Depend on $(extrah) and $(commonh).
(mf?.o): Depend only on mf?.c.
Thu Nov 11 11:18:06 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (x_{include,lib}_flags): Renamed from x{include,lib}dir.
Sun Nov 7 14:26:10 1993 Karl Berry (karl@cs.umb.edu)
* convert: Remove call to sync.
* Makefile.in (mfd.h): Instead, touch mfd.h after it finishes
running, to ensure the timestamp will be later.
Tue Nov 2 16:00:16 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (objs): Add mf10.o.
Tue Oct 12 13:34:00 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Simplify kpathsea references.
Sun Oct 3 13:11:05 1993 Karl Berry (karl@cs.umb.edu)
* fixcoerce.h: Rename to coerce.add.
* convert: Similarly.
* Makefile.in (commonh): paths.h is in kpathsea.
(commono): kpathsea.a has its own variable now.
(*clean): Include standard targets.
(program): New variable.
(install): Use it.
Tue May 18 14:05:03 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-*): mkdirchain on install dirs.
Sun May 9 10:10:53 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Remove $(srcdir) for paths.h.
(commono): Add kpathsea library.
Fri Apr 30 15:07:45 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Add paths.h.
Fri Apr 23 10:41:11 1993 Karl Berry (karl@cs.umb.edu)
* convert: Remove volatile's for the MIPS compiler, as they no
longer have any effect.
Fri Apr 16 08:01:53 1993 Karl Berry (karl@cs.umb.edu)
* mf.ch: Doc fix.
Sat Apr 10 16:42:43 1993 Karl Berry (karl@cs.umb.edu)
* convert: Don't sync unless /bin/sync exists.
Fri Apr 9 16:07:46 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Define as config.h.
Thu Mar 25 16:58:34 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (openinout.c): Remove the file before making the link.
Sat Mar 13 12:10:46 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (CPPFLAGS): Add @DEFS@, for -DHAVE_CONFIG_H.
Sun Feb 28 10:51:08 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean-trap): Don't install mfd.h.bak if it has the
trap constants.
Sun Feb 21 08:28:22 1993 Karl Berry (karl@cs.umb.edu)
* Version 5.851d.
Tue Feb 16 17:54:50 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec, install-data): New targets.
Sun Feb 14 11:25:51 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (iobjs, vobjs): Don't include $(objs), and depend on
mfd.h.
(inimf, virmf): Include $(objs.)
Fri Feb 12 07:36:49 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean): Remove iextra.c.
(mostlyclean): Remove trap.mf.
Wed Jan 27 07:14:55 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (run-trap): {mf,tex}ware => {dvi,font}util.
Tue Jan 26 11:44:29 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install): Change `exit 0' to true.
* Makefile.in (iextra.c, inimf.c): New targets.
(iextra.o, initex.o): Just do the compilation.
Mon Jan 25 10:38:57 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean-trap): Remove trapmf and stamp-trap.
* Makefile.in (CPPFLAGS): Don't need -I. any more.
Sun Jan 24 11:35:16 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (iextra.o): $(LN) to $(extrac), instead of compiling
directly.
* Makefile.in (mf-extra): Rename to vextra.
* Makefile.in (cmf.ch): Don't use $@.
* Makefile.in (run-trap): Depend on trapmf.
* Makefile.in (mostlyclean): Remove trap files explicitly, as we
don't want to remove trap.sed.
* Makefile.in (mfsrcdir): Define with `mf', not `tex'!
Sat Jan 16 08:46:33 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (mfsrcdir): New variable; use it in various rules.
Thu Jan 14 08:04:47 1993 Karl Berry (karl@cs.umb.edu)
* small.sed (pool_size): Increase to 36000. From tim@maths.tcd.ie.
Sun Jan 3 13:16:32 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
* Makefile.in (check): New target, synonym for run-trap.
Sun Dec 13 09:45:53 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean-trap, c-sources): New targets.
* Makefile.in (stamp-trap): Use sed instead of ini_to_trap.
Sat Dec 12 13:15:03 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
* small.sed: New file.
* Makefile (stamp-trap): Change dependency to `stamp-convert'.
Mon Nov 16 08:16:51 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (cmf.ch): New target.
Sun Oct 11 11:23:26 1992 Karl Berry (karl@cs.umb.edu)
* convert (sed): Don't use /bin/sed, as GNU sed works as of 1.10.
Thu Sep 24 11:03:39 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (openinout.c): avoid use of $<.
Thu Sep 17 08:41:26 1992 Karl Berry (karl@hayley)
* Makefile (install): use filename in install target names.
Fri Sep 4 09:02:57 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Wed Aug 19 08:22:57 1992 Karl Berry (karl@hayley)
* Makefile (openinout.c): new target.
(clean): remove it.
* Makefile (CPPFLAGS): we need -I. for mfd.h.
Wed Aug 12 16:28:18 1992 Karl Berry (karl@hayley)
* Makefile (iextra.o): include $(CPPFLAGS); remove `-I.'.
(inimf.o): likewise.
(mf-extra.c): new target.
(mf-extra.o); depend on it (and use default compilation rule).
(fileioo): use default compilation rule.
Sat Jul 25 17:51:03 1992 Karl Berry (karl@hayley)
* Makefile (makeargs): pass CFLAGS, not cflags.
Sun Jul 5 07:28:13 1992 Karl Berry (karl@hayley)
* Makefile (clean): remove inimf.c, trap.*, mf-extra.c here.
Thu Jul 2 16:08:00 1992 Karl Berry (karl@hayley)
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Tue Jun 23 10:19:45 1992 Karl Berry (karl@hayley)
* Makefile (CC): change default to `gcc -posix'.
Thu May 14 19:21:57 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Sat Apr 25 09:36:23 1992 Karl Berry (karl@hayley)
* Makefile (distclean): new target.
* convert: sync after the pipeline.
Thu Apr 23 12:05:51 1992 Karl Berry (karl@hayley)
* Makefile: fix clean targets, fix inimf/virmf/etc. to reflect
reality. From Andreas.
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Sat Apr 11 09:18:59 1992 Karl Berry (karl@hayley)
* mf.ch (pack_file_name, pack_buffered_name): don't fill the
name_of_file array completely.
Fri Apr 10 17:25:07 1992 Karl Berry (karl@hayley)
* mf.ch: new file for configure to make cmf.ch from.
* Makefile (mostlyclean): remove cmf.ch.
Fri Apr 3 09:55:30 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Mon Mar 30 07:57:08 1992 Karl Berry (karl at hayley)
* Makefile (clean, mostlyclean, windowlib, trapmf): use $(MAKE),
not `make'.
Sun Mar 29 17:06:04 1992 Karl Berry (karl at hayley)
* ini_to_trap: change some more constants.
* mf.web: new verion from dek.
* cmf.ch: update version number.
Sun Mar 22 06:33:42 1992 Karl Berry (karl at fosse)
* Makefile (makeargs): don't bother to pass variables for linking.
Sat Mar 21 10:40:57 1992 Karl Berry (karl at hayley)
* cmf.ch (38.789): check for the extension being irrelevant.
Fri Mar 20 15:30:00 1992 Karl Berry (karl at hayley)
* Makefile (mostlyclean): new name for `clean'.
(clean): what `realclean' used to be.
(realclean): nothing to do anymore.
(install): install the program.
* cmf.ch (4.51): set name_length to strlen pool_name.
Fri Jan 24 09:21:17 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
Wed Jan 15 12:59:29 1992 Karl Berry (karl at hayley)
* cmf.ch (input): same changes as in TeX.
Sun Jan 12 09:18:03 1992 Karl Berry (karl at hayley)
* cmf.ch (memory structure): include "texmfmem.h", omitting the
../common.
* Makefile (fileioh): no longer exists.
Tue Jan 7 15:52:24 1992 Karl Berry (karl at hayley)
* ctex.ch (opening input files): do `name_length + 5 <
file_name_size', not `name_length < file_name_size + 5'. From
tony@marcam.dsir.govt.nz.
mp:
Wed Apr 12 18:50:13 1995 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* mp.ch: complete rewrite, merging material from ../mf/mf.ch
and the original mp.ch.
Tue Apr 11 17:53:15 1995 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* Makefile: discarded, will be regenerated from Makefile.in
during configure run.
* Makefile.in: complete rewrite, based on ../mf/Makefile.in.
* convert: replaced by modified version of ../mf/convert script.
Removed execute permission, using sh -c in the Makefile instead.
* mp.def: discarded, using ../lib/texmf.defines instead.
* mp.h: discarded, using the web2c header files from ../lib.
(Actually moved to MPtime subdirectory for use in timing test.)
* mpext.c: discarded, using routines from ../lib/lib.a instead.
Moved code for callmakempx() to file ../lib/openinout.c.
* mpmath.c: preserved without changes. Ccomments refererring to
site.h are no longer applicable when using ../lib/c-auto.h instead.
* pathexp.c: moved to ../mpware as only DMP uses the pathexpand()
function. MetaPost and DVItoMP use Kpathsea routines instead.
* fixcoerce.h: discarded, using ../mf/coerce.add instead.
* fix.lex: discarded, apparently no longer needed in web2c-6.1.
* ini_to_trap: discarded, using sed script trap.sed instead of
shell script that invokes ed. Also added sed script small.sed.
* trapdir: renamed to MPtrap, for consistency with ../mf/MFtrap.
* trapmp: replaced by modified version of ../mp/trapenv script.
Removed execute permission, using sh -c in the Makefile instead.
Also rename etrapmp target to trapmp in the Makefile.
Mon Apr 11 18:32:00 1995 Ulrik Vieth <vieth@thphy.uni-duesseldorf.de>
* created subdirectory MPtime for timing test files not needed
for production version of MetaPost.
* mp.h, test_mpd.h, mathtest.c, time.c, pmath.c: moved to MPtime.
* mpmath.c: copied to MPtime and renamed to cmath.c for use in
timing test. Changed #include "mpd.h" to include "test_mpd.h".
* site.h, defaults.h: copied from top-level directory to MPtime.
Renamed site.h to site.h.orig and copied to site.h.{system-type}.
tex:
Thu Feb 24 06:02:39 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (tex.p): Use a tab, not eight spaces, in the
commented-out mltex lines. From Eric.Picheral@univ-rennes1.fr.
Mon Feb 21 13:25:52 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: srcdir changes from simon.
Wed Feb 2 11:01:18 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Tue Feb 1 13:26:25 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (extrah): Include texd.h and texmfmem.h here.
(commonh): No texmfmem.h here.
* Makefile.in (tex.p): Add commented out additions for MLTeX.
Mon Jan 24 07:34:13 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Mon Jan 17 14:29:27 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (iextra.o): Depend on texd.h.
Wed Dec 15 06:29:41 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (formats): Rename to fmts.
Tue Dec 7 13:45:05 1993 Karl Berry (karl@cs.umb.edu)
* tex.ch: Invoke MakeTeXTeX for \openin.
From carlisle@cs.man.ac.uk.
* patgen.ch: Doc fix.
Sat Dec 4 16:28:27 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (*objs): Depend on $(extrah) and $(commonh).
(tex?.o): Depend only on tex?.c.
Fri Dec 3 08:58:50 1993 Karl Berry (karl@cs.umb.edu)
* patgen.ch (filnam): Add a trailing space to filnam, and declare
it to be one character larger. From jmr.
Sun Nov 14 11:58:13 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install*): texfontdir => fontdir.
Sun Nov 7 14:25:54 1993 Karl Berry (karl@cs.umb.edu)
* convert: Remove call to sync.
* Makefile.in (mfd.h): Instead, touch mfd.h after it finishes
running, to ensure the timestamp will be later.
Tue Nov 2 13:33:41 1993 Karl Berry (karl@cs.umb.edu)
* tex.ch (banner): At version 3.1415 now.
* tex.web: Update from Knuth.
* Makefile.in (objs): Add tex9.o and rename $(tex9_o) to extra_tex_obj.
* openinout.c (make_tex_file): Return a boolean, not a string.
Tue Oct 12 13:33:02 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Simplify kpathsea references.
Sun Oct 3 13:18:18 1993 Karl Berry (karl@cs.umb.edu)
* fixcoerce.h: Rename to coerce.add.
* convert: Similarly.
* Makefile.in (commonh): paths.h is in kpathsea.
(commono): kpathsea.a has its own variable now.
(*clean): Include standard targets.
(program): New variable.
(install): Use it.
Tue Jun 29 16:22:54 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Doc fix.
Mon May 31 08:19:11 1993 Karl Berry (karl@cs.umb.edu)
* trip.sed (negtrieopsize): Change to -500.
Tue May 18 14:04:07 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-*): mkdirchain on install dirs.
Sun May 9 10:10:54 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Remove $(srcdir) for paths.h.
(commono): Add kpathsea library.
Tue May 4 10:24:29 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (extraclean): Do not depend on distclean; remove
CONTENTS.tex and tex.tex.
Fri Apr 30 15:08:01 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (patgen2): Rename to patgen throughout.
* Makefile.in (commonh): Add paths.h.
Fri Apr 16 07:27:03 1993 Karl Berry (karl@cs.umb.edu)
* tex.ch: Doc fix.
Sat Apr 10 16:42:35 1993 Karl Berry (karl@cs.umb.edu)
* convert: Don't sync unless /bin/sync exists.
Fri Apr 9 16:07:52 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Define as config.h.
Sat Mar 13 12:10:53 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (CPPFLAGS): Add @DEFS@, for -DHAVE_CONFIG_H.
Fri Mar 12 15:48:57 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (tex9.o): Depend on tex9.c, not tex8.c!
Sun Feb 28 10:47:06 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean-trip): Don't reinstall texd.h if it has the
trip constants.
* Makefile.in (clean-trip): Remove triptex, not tripmf.
Sun Feb 21 08:28:26 1993 Karl Berry (karl@cs.umb.edu)
* Version 5.851d.
Tue Feb 16 17:56:03 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec, install-data): New targets.
Mon Feb 15 10:19:12 1993 Karl Berry (karl@cs.umb.edu)
* tex.ch (563): Call make_tex_tfm if the first open fails.
* tex.ch: Only call a_open_in without the .tex if we actually
changed anything; call make_tex_tex if everything before fails,
and if that succeeds, call a_open_in again.
* tex.ch: Comment out term_offset thing.
Sun Feb 14 11:24:37 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (iobjs, vobjs): Don't include $(objs), and depend on
texd.h.
(initex, virtex): Include $(objs).
Sun Feb 7 10:22:45 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install): Fix logic for overwriting texfonts.map.
* Makefile.in (.p.c, .ch.p): New suffix rules for patgen.
Sat Jan 30 10:31:01 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install): Correct texfonts.map installation.
Wed Jan 27 07:14:28 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (run-trip): {mf,tex}ware => {dvi,font}util.
Tue Jan 26 11:44:45 1993 Karl Berry (karl@cs.umb.edu)
* *.ch (banner): Use version_string.
* Makefile.in: Merge in patgen.
* Makefile.in (install): Change `exit 0' to true.
* Makefile.in (install): Install texfonts.map.
* Makefile.in (iextra.c, initex.c): New targets.
(iextra.o, initex.o): Just do the compilation.
Mon Jan 25 10:39:13 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean-trip): Remove tripmf and stamp-trip.
* Makefile.in (CPPFLAGS): Don't need -I now.
Sun Jan 24 11:34:27 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (tex-extra): Rename to vextra.
* Makefile.in (iextra.o): $(LN) to $(extrac), instead of compiling
it directly.
* Makefile.in (ctex.ch): Don't use $@.
* Makefile.in (mostlyclean): Remove trip files explicitly, to
avoid removing trip.sed.
* Makefile.in (stamp-trip): Depend on trip.sed in $(texsrcdir).
Sat Jan 16 09:00:49 1993 Karl Berry (karl@cs.umb.edu)
* tex.ch (trie_size): Increase to 30,000 for
English/German/Portuguese.
Thu Jan 14 08:02:01 1993 Karl Berry (karl@cs.umb.edu)
* small.sed (font_mem_size, hash_size, pool_size, max_strings,
string_vacancies): Increase the small sizes somewhat. The result
still runs on a 3b1, so I suspect it will run on anything. From
andy@scp.caltech.edu.
Sun Jan 3 13:14:39 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
* Makefile.in (DIFF, DIFFFLAGS): New variables.
(run-trip): Use them (in appropriate places) instead of `diff', so
spiff can be used if it's available (and desired).
(check): New target, synonym for run-trip.
Sun Dec 13 14:13:02 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (clean-trip, c-sources): New targets.
Sat Dec 12 14:08:07 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
* small.sed: New file.
Mon Nov 16 08:16:33 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (ctex.ch): New target.
Sat Nov 14 18:50:20 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (run-trip): Run tftopl on the trip.tfm we create, and
diff the result with the original PL file.
Tue Oct 27 08:15:12 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (objs): Use $(tex9_o), which is empty by default.
* tex.ch (mem_top): Improve comment.
Sun Oct 18 13:55:54 1992 Karl Berry (karl@cs.umb.edu)
* tex.ch (trie_op_size): Define as 751, since that's prime.
* tex.ch (neg_trie_op_size): Improve comments, and use it in
[43.944] where useful.
Thu Sep 24 11:03:02 1992 Karl Berry (karl@cs.umb.edu)
* Makefile (openinout.c): avoid use of $<.
Thu Sep 17 08:42:01 1992 Karl Berry (karl@hayley)
* Makefile (install): use filename in install target names.
Fri Sep 4 09:04:06 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Wed Aug 19 08:22:27 1992 Karl Berry (karl@hayley)
* Makefile (openinout.c): new target.
(clean): remove it.
* Makefile (CPPFLAGS): we need -I. for texd.h.
Wed Aug 12 16:28:18 1992 Karl Berry (karl@hayley)
* Makefile (iextra.o): include $(CPPFLAGS); remove `-I.'.
(initex.o): likewise.
(tex-extra.c): new target.
(tex-extra.o); depend on it (and use default compilation rule).
(fileioo): use default compilation rule.
Sat Jul 25 17:51:18 1992 Karl Berry (karl@hayley)
* Makefile (amstex.fmt): don't bother with \dump on the command
line, since amstex.ini includes it.
* Makefile (makeargs): pass CFLAGS, not cflags.
Sun Jul 5 07:28:40 1992 Karl Berry (karl@hayley)
* Makefile (clean): remove trip.*, initex.c, tex-extra.c here.
Fri Jul 3 11:50:49 1992 Karl Berry (karl@hayley)
* small.diff (hash_size, hash_prime): increase to 3500 and 2981
for LaTeX. (From bernd.)
Thu Jul 2 16:09:45 1992 Karl Berry (karl@hayley)
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Thu May 21 09:22:33 1992 Karl Berry (karl@hayley)
* tex.ch: warn that increasing max_quarterword makes texmfmem.h
break.
Thu May 14 19:22:23 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Thu May 7 07:29:59 1992 Karl Berry (karl@hayley)
* Makefile (tex9.[co]): new targets (not used in our dist).
Sat Apr 25 08:56:54 1992 Karl Berry (karl@hayley)
* convert: sync after the pipeline.
* Makefile (distclean): new target.
* Makefile (amstex.fmt): don't use &./tex.
(amslatex.fmt): be more explicit about AMSLaTeX's horrible
installation scheme.
Thu Apr 23 12:04:49 1992 Karl Berry (karl@hayley)
* Makefile (initex, virtex): changes from Andreas to reflect
reality; fix clean targets.
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Sat Apr 11 09:19:41 1992 Karl Berry (karl@hayley)
* tex.ch (pack_file_name, pack_buffered_name): don't fill the
name_of_file array completely.
Fri Apr 10 17:03:41 1992 Karl Berry (karl@hayley)
* tex.ch: new file for configure to make ctex.ch from.
* Makefile (mostlyclean): remove ctex.ch.
* Makefile (default): make it `all'.
Fri Apr 3 09:55:55 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Mon Mar 30 07:59:29 1992 Karl Berry (karl at hayley)
* Makefile (triptex): use $(MAKE), not make.
Sun Mar 29 15:44:30 1992 Karl Berry (karl at hayley)
* ini_to_trip: change additional constants.
* tex.web: new version from dek.
* tex.ch: update version number.
Sat Mar 21 11:09:06 1992 Karl Berry (karl at hayley)
* ctex.ch (pool_name): define to be `TEX_POOL_NAME', instead of
hardwiring `tex.pool'.
Fri Mar 20 15:29:22 1992 Karl Berry (karl at hayley)
* Makefile (mostlyclean): new name for `clean'.
(clean): what `realclean' used to be.
(realclean): nothing to do anymore.
(install): install the program.
* ctex.ch (4.51): set name_length to the strlen of pool_name.
Sun Mar 1 07:09:28 1992 Karl Berry (karl at hayley)
* ctex.ch (font_mem_size): increase to 100,000.
Fri Jan 24 07:41:25 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
* ctex.ch (\input, \openin): don't try .tex if the filename is
already the maximal length; otherwise foo.aux gets found
as foo.aux.tex under system V, when foo is 14 characters long.
Tue Jan 21 17:20:17 1992 Karl Berry (karl at hayley)
* ctex.ch (pool_size): increase to 124,000.
(string_vacancies): to 100,000.
Wed Jan 15 10:12:30 1992 Karl Berry (karl at hayley)
* ctex.ch (\input, \openin): if cur_ext=".tex", don't append .tex,
and reset it before trying without suffix.
* ctex.ch (max_strings): increase to 15000.
Tue Jan 14 08:52:24 1992 Karl Berry (karl at hayley)
* ctex.ch (\input, \openin): try to find foo.tex before foo.
(From bent@ragged.dartmouth.edu.)
* Makefile (*.fmt): do not remove the \font lines from the output
via grep, as then prompts do not appear.
Sun Jan 12 09:17:40 1992 Karl Berry (karl at hayley)
* ctex.ch (memory structure): include "texmfmem.h", omitting the
../common.
* Makefile (fileioh): no longer exists.
Tue Jan 7 15:51:28 1992 Karl Berry (karl at hayley)
* ctex.ch (opening input files): do `name_length + 5 <
file_name_size', not `name_length < file_name_size + 5'. From
tony@marcam.dsir.govt.nz.
web:
Mon Feb 21 14:51:24 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: srcdir changes from simon.
Wed Feb 2 11:00:09 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.1.
Mon Jan 24 07:27:36 1994 Karl Berry (karl@cs.umb.edu)
* Version 6.0.
Sun Jan 23 16:56:45 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (mostlyclean): Remove tangleboot.
Tue Nov 30 16:19:06 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (tangle.web): Exit 1 if we get here.
Sun Nov 7 14:52:11 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (tangle.web): New target, telling people to retrieve
web.tar.gz.
Tue Oct 12 13:32:07 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Simplify kpathsea references.
Sun May 9 10:10:56 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Remove $(srcdir) for paths.h.
(commono): Add kpathsea library.
Fri Apr 30 15:08:11 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Add paths.h.
Fri Apr 9 16:07:56 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (commonh): Define as config.h.
Sat Mar 13 12:10:56 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (CPPFLAGS): Add @DEFS@, for -DHAVE_CONFIG_H.
Sun Feb 21 08:28:31 1993 Karl Berry (karl@cs.umb.edu)
* Version 5.851d.
Tue Feb 16 17:58:10 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-exec, install-data): New targets.
Fri Feb 12 07:37:51 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (mostlyclean): Remove pooltype.
Sun Feb 7 20:10:46 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (tangleboot.c): Use $(MAKE), not make.
Tue Jan 26 16:36:45 1993 Karl Berry (karl@cs.umb.edu)
* *.ch (banner): Use version_string.
* Makefile.in: Merge pooltype from texware.
Sun Jan 3 13:34:00 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (distclean): Remove Makefile.
Sun Dec 13 14:28:37 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in (c-sources): New target.
Sat Dec 12 14:19:16 1992 Karl Berry (karl@cs.umb.edu)
* Makefile.in: Rewrite from Makefile.
Fri Sep 4 09:05:12 1992 Karl Berry (karl@hayley)
* Makefile (extraclean): new target.
(distclean): don't remove backup files etc. here.
Wed Aug 19 08:35:14 1992 Karl Berry (karl@hayley)
* Makefile (tangleboot): use tangleboot.o as arg, not tangleboot.c.
Sat Jul 25 17:52:34 1992 Karl Berry (karl@hayley)
* Makefile (tangleboot): depend on tangleboot.o.
(tangleboot.o): new target.
Thu Jul 2 16:10:15 1992 Karl Berry (karl@hayley)
* Makefile (CPPFLAGS): new variable
(.c.o): use it.
(cflags): change to CFLAGS.
Tue Jun 23 10:14:23 1992 Karl Berry (karl@hayley)
* Makefile (tangleboot.c): make all in lib and web2c before trying
to `convert'.
Sun Jun 21 16:42:00 1992 Karl Berry (karl@io)
* Makefile (realclean): don't remove tangleboot after all.
Thu May 14 19:22:40 1992 Karl Berry (karl@claude.cs.umb.edu)
* Version 5.851c.
Wed May 13 10:52:36 1992 Karl Berry (karl@hayley)
* Makefile (clean): can't remove *.[pch], since tangleboot goes away.
Sat Apr 25 09:40:18 1992 Karl Berry (karl@hayley)
* Makefile (libs): new var.
(distclean): new target.
Thu Apr 16 13:49:36 1992 Karl Berry (karl@ra.cs.umb.edu)
* Version 5.851b.
Wed Apr 15 03:59:25 1992 Karl Berry (karl@fosse)
* Makefile (mostlyclean): remove tangleboot.
Tue Apr 14 17:25:29 1992 Karl Berry (karl@hayley)
* Makefile (tangleboot.[ch]): new targets.
(tangleboot): depend on tangleboot.h, not tangle.h.
(clean): remove tangle.h.
Mon Apr 13 09:10:07 1992 Karl Berry (karl@hayley)
* Makefile (tangle.p): depend on tangleboot; remove the loop.
(tangleboot): new target.
Fri Apr 3 09:56:16 1992 Karl Berry (karl at hayley)
* Version 5.851a.
Thu Apr 2 13:48:21 1992 Karl Berry (karl at ds1.cs.umb.edu)
* Makefile (clean): don't remove *.c; we need tangleboot.
Sun Mar 29 15:24:51 1992 Karl Berry (karl at hayley)
* {tangle,weave}.web: new versions from dek.
* {tangle,weave}.ch: update version numbers.
Fri Jan 24 09:20:20 1992 Karl Berry (karl at hayley)
* Makefile (cflags): don't include -I../config.
Tue Jan 7 16:29:30 1992 Karl Berry (karl at hayley)
* Makefile (tangle.p): use quotes instead of \'s, for ptx. (From
maddog@sequent.com.)