\setcounter{secnumdepth}{3} % % \end{macrocode} % \end{counter} % % % \begin{command}{\ifnumbered,\Ifnumbered} % \changes{v3.12}{2013/12/16}{added} % \changes{v3.28}{2019/11/19}{\cs{ifnumbered} renamed to \cs{Ifnumbered}} % \begin{command}{\ifunnumbered,\Ifunnumbered} % \changes{v3.12}{2013/12/16}{added} % \changes{v3.28}{2019/11/19}{\cs{ifunnumbered} renamed to \cs{Ifunnumbered}} % Commands % \begin{quote}\raggedright % \cs{Ifnumbered}\marg{section level name}\marg{numbered}\marg{not numbered}\\ % \cs{Ifunnumbered}\marg{section level name}\marg{not numbered}\marg{numbered}\\ % \end{quote} % If \meta{section level name} has to be numbered, execute code \meta{numbered} % otherwise execute code \meta{not numbered}. % \begin{macrocode} %<*body> \providecommand*{\ifnumbered}{% \ClassWarning{\KOMAClassName}{Usage of deprecated command `\string\ifnumbered'.\MessageBreak The command has been renamed because of a\MessageBreak recommendation of The LaTeX Project Team.\MessageBreak Please replace `\string\ifnumbered' by `\string\Ifnumbered'% }% \Ifnumbered } \newcommand*{\Ifnumbered}[1]{% \if@currentusenumber \scr@ifundefinedorrelax{#1numdepth}{% \expandafter\@secondoftwo }{% \expandafter\ifnum \@nameuse{#1numdepth}>\c@secnumdepth \expandafter\expandafter\expandafter\@secondoftwo \else \expandafter\expandafter\expandafter\@firstoftwo \fi }% \else \expandafter\@secondoftwo \fi } \providecommand*{\ifunnumbered}{% \ClassWarning{\KOMAClassName}{Usage of deprecated command `\string\ifunnumbered'.\MessageBreak The command has been renamed because of a\MessageBreak recommendation of The LaTeX Project Team.\MessageBreak Please replace `\string\ifunnumbered' by `\string\Ifunnumbered'% }% \Ifunnumbered } \newcommand*{\Ifunnumbered}[1]{% \Ifnumbered{#1}{\@secondoftwo}{\@firstoftwo}% } % % \end{macrocode} % \end{command}^^A \Ifunnumbered % \end{command}^^A \ifnumbered % % % \begin{macro}{\scr@activate@xsection,\scr@osectarg} % \changes{v3.10}{2011/08/30}{added} % Option \opt{headings=optiontotocandhead}, \opt{headings=optiontotoc} and % \opt{headings=optiontohead} used % \begin{quote} % \cs{scr@activate@xsection}\marg{value} % \end{quote} % with the values 3, 2 and 1 to activate the extended optional argument. This % sets \cs{scr@osectarg} to the corresponding value. The initial value 0 % deactivates the extended optional argument. % \begin{description} % \item[ToDo:] Do we really need \cs{scr@activate@xsection}, that is used % inside option \opt{headings} only? % \end{description} % \begin{macrocode} %<*prepare> \newcommand*{\scr@osectarg}{0} \newcommand*{\scr@activate@xsection}[1]{% \renewcommand*{\scr@osectarg}{#1}% } % % \end{macrocode} % \end{macro}^^A \scr@activate@xsection,\scr@osectarg % % % \begin{macro}{\@startsection} % \changes{v3.13a}{2014/09/11}{re-definition for extended optional argument} % \begin{macro}{\scr@startsection} % \changes{v3.13a}{2014/09/11}{added} % \changes{v3.18}{2015/05/22}{using \cs{numexpr} for argument 2} % \changes{v3.18}{2015/05/22}{using \cs{glueexpr} for arguments 3--5} % \changes{v3.20}{2016/04/12}{\cs{@ifstar} replaced by \cs{kernel@ifstar}} % \changes{v3.26}{2018/09/18}{supporting \opt{afterindent}} % \begin{macro}{\scr@saved@startsection} % \changes{v3.13a}{2014/09/11}{added} % \changes{v3.20}{2016/04/12}{supporting \pkg{amsgen}} % \begin{macro}{\startsection@sectionname,\startsection@secnumdepth, % \startsection@indent,\startsection@beforeskip, % \startsection@afterskip,\startsection@afterindent, % \@startsection@runintrue,\@startsection@runinfalse, % \if@startsection@runin} % \changes{v3.26}{2018/05/14}{added} % The \cs{@startsection} of the \LaTeX{} kernel does not provide all the % features we need for \KOMAScript. And the generic hooks of \LaTeX{} do not % allow to change it wide enough. So we either have to use \pkg{xparse} to % patch it very much or we have to define our own version. In this case % patching is too fragile, so we define \cs{scr@startsection} and store the % original definition in \cs{scr@saved@startsection}. % \begin{description} % \item[Note:] Package \pkg{amsgen} redefines \cs{@ifstar}. The new version % does not ignore white spaces. So testing the original definition using % \cs{@ifstar} may fail. It is better to use \cs{kernel@ifstar}. % \item[ToDo:] All the testing here doesn't make much sense, because we are % inside a class and packages like \pkg{amsgen} should not yet have been % loaded. So the test only needs to test, if the \LaTeX{} kernel has been % changed. % \item[Note:] In our own \cs{scr@startsection} the macros % \cs{startsection@sectionname}, \cs{startsection@secnumdepth}, % \cs{startsection@indent}, \cs{startsection@beforeskip}, % \cs{startsection@afterskip}, \cs{if@afterindent}, % \cs{if@startsection@runin}, and \cs{startsection@afterindent} are valid % from executing the do hook \dhook{heading/postinit}. So they can be used % inside all the hooks. % \item[Note:] \cs{startsection@indent}, \cs{startsection@beforeskip}, % \cs{startsection@afterskip} and \cs{startsection@afterindent} are either % skips or \cs{glueexpr}, that can be used like skips. % \item[Note:] \cs{startsection@beforeskip} and \cs{startsection@afterskip} % are effective values already. Not special treatment for negative or % positive values must be done. % \item[Note:] \cs{if@startsection@runin} % are either \cs{iftrue} or \cs{iffalse}. % \item[Note:] \cs{if@startsection@indentafter} does not exist and is not % needed, because \cs{if@afterindent} is already valid and also either % \cs{iftrue} or \cs{iffalse}. % \item[Note:] Using one of the \cs{startsection@\dots} % resp. \cs{if@startsection@\dots} macros outside \cs{scr@startsection} is % not allowed and the result is unspecified. Inside \cs{scr@startsection} % they have to be interpreted as constants, so changing them is not allowed! % \end{description} % \begin{macrocode} %<*body> \newcommand*{\scr@saved@startsection}[6]{% \if@noskipsec \leavevmode \fi \par \@tempskipa #4\relax \@afterindenttrue \ifdim \@tempskipa <\z@ \@tempskipa -\@tempskipa \@afterindentfalse \fi \if@nobreak \everypar{}% \else \addpenalty\@secpenalty\addvspace\@tempskipa \fi \kernel@ifstar {\@ssect{#3}{#4}{#5}{#6}}% {\@dblarg{\@sect{#1}{#2}{#3}{#4}{#5}{#6}}}% } \def\reserved@a#1#2#3#4#5#6{% \if@noskipsec \leavevmode \fi \par \@tempskipa #4\relax \@afterindenttrue \ifdim \@tempskipa <\z@ \@tempskipa -\@tempskipa \@afterindentfalse \fi \if@nobreak \everypar{}% \else \addpenalty\@secpenalty\addvspace\@tempskipa \fi \@ifstar {\@ssect{#3}{#4}{#5}{#6}}% {\@dblarg{\@sect{#1}{#2}{#3}{#4}{#5}{#6}}}% } \ifcase \ifx\@startsection\scr@saved@startsection 0 \else \ifx\@startsection\reserved@a 0 \else 1 \fi \fi \newcommand*{\scr@startsection}[6]{% \ExecuteDoHook{heading/preinit/#1}% \if@noskipsec \leavevmode \fi \par \@tempskipa \glueexpr #4\relax \@ifundefined{scr@#1@afterindent}{% \def\startsection@afterindent##1##2##3{##3}% }{% \expandafter\let\expandafter\startsection@afterindent \csname scr@#1@afterindent\endcsname }% \startsection@afterindent{\@afterindenttrue}{\@afterindentfalse}{% \@afterindenttrue \ifdim \@tempskipa <\z@ \@tempskipa -\@tempskipa \@afterindentfalse \fi }% \def\startsection@sectionname{#1}% \def\startsection@secnumdepth{\numexpr #2\relax}% \def\startsection@indent{\glueexpr #3\relax}% \let\startsection@beforeskip\@tempskipa \@ifundefined{scr@#1@runin}{% \def\scr@sect@runin##1##2##3{##3}% }{% \expandafter\let\expandafter\scr@sect@runin \csname scr@#1@runin\endcsname }% \scr@sect@runin{% \def\startsection@afterskip{\glueexpr #3\relax}% \expandafter\let\csname if@startsection@runin\expandafter\endcsname \csname iftrue\endcsname }{% \def\startsection@afterskip{\glueexpr #3\relax}% \expandafter\let\csname if@startsection@runin\expandafter\endcsname \csname iffalse\endcsname }{% \ifdim \glueexpr #5\relax <\z@ \def\startsection@afterskip{\glueexpr (#3)*\m@ne\relax}% \expandafter\let\csname if@startsection@runin\expandafter\endcsname \csname iftrue\endcsname \else \def\startsection@afterskip{\glueexpr #3\relax}% \expandafter\let\csname if@startsection@runin\expandafter\endcsname \csname iffalse\endcsname \fi }% \ExecuteDoHook{heading/postinit/#1}% \if@nobreak \everypar{}% \else \addpenalty\@secpenalty\addvspace\@tempskipa \fi \kernel@ifstar {% \ExecuteDoHook{heading/branch/star/#1}% \def\scr@s@ct@@nn@m@{#1}% \@ssect{\glueexpr #3\relax}{\glueexpr #4\relax}{\glueexpr #5\relax}{#6}% }{% \ExecuteDoHook{heading/branch/nostar/#1}% \scr@section@dblarg{% \@sect{#1}{\numexpr #2\relax}{\glueexpr #3\relax}{\glueexpr #4\relax}% {\glueexpr #5\relax}{#6}% }% }% } \else \ClassWarningNoLine{\KOMAClassName}{`\string\@startsection' has been changed.\MessageBreak \KOMAClassName\space needs it's own definition of `\string\@startsection'\MessageBreak to provide extended features for the optional argument\MessageBreak of `\string\section' etc.\MessageBreak Generally it defines `\string\@startsection' completely new\MessageBreak to achieve this. Because of the unexpected definition\MessageBreak an alternative approach will be used.\MessageBreak If this fails and if there isn't a new release of\MessageBreak KOMA-Script that fixes the problem, please\MessageBreak send a report to the KOMA-Script author.\MessageBreak Note, that this alternative approach does not\MessageBreak execute the elements of do-hooks:\MessageBreak \space\space- `heading/postinit',\MessageBreak \space\space- `heading/branch/star',\MessageBreak \space\space- `heading/branch/nostar',\MessageBreak and does always use `runin=bysign' and\MessageBreak `afterindent=bysign'% }% \let\scr@saved@startsection\@startsection \newcommand*{\scr@startsection}[6]{% \ExecuteDoHook{heading/preinit/#1}% \kernel@ifstar {% \scr@saved@startsection{#1}{\numexpr #2\relax}{\glueexpr #3\relax}% {\glueexpr #4\relax}{\glueexpr #5\relax}{#6}*% }{% \scr@section@dblarg{% \scr@saved@startsection{#1}{\numexpr #2\relax}{\glueexpr #3\relax}% {\glueexpr #4\relax}{\glueexpr #5\relax}{#6}}% }% } \fi % \end{macrocode} % \begin{macro}{\scr@sect@runin} % \changes{v3.26}{2018/09/18}{added} % Depending on sectioning feature \opt{runin} the macro expands to the first % argument, if a in-text heading aka run-in heading has to used, the second % argument, if a free-standing heading has to be used, or the third argument, % of run-in or free-standing depends on the sign of \opt{afterskip}. The % initial definition is depending on the sign of \opt{afterskip}. This initial % definition is also done inside \cs{@xsect}. \cs{scr@startsection} also % redefines \cs{scr@sect@runin}. So it should always be the currently valid % definition, even if \cs{scr@startsection} is used with a section command, % that does not provide all the variable of \KOMAScript. % \begin{macrocode} \newcommand*{\scr@sect@runin}[3]{#3} % \end{macrocode} % \end{macro}^^A \scr@sect@runin % \begin{macro}{\scr@startsection@ulm@error} % \changes{v3.26}{2018/05/14}{added} % This is the initial error message for using one of the internal macros % before \cs{scr@startsection}. This should never happen. % \begin{macrocode} \newcommand*{\scr@startsection@ulm@error}[1]{% \ClassError{\KOMAClassName}{% \string#1 undefined outside of \string\scr@startsection }{% A KOMA-Script macro for package authors have been used outside the\MessageBreak specified definition scope.\MessageBreak See `scrkernel-sections.dtx' for more information.% }% } \newcommand*\startsection@sectionname{% \scr@startsection@ulm@error\startsection@sectionname} \newcommand*\startsection@secnumdepth{% \scr@startsection@ulm@error\startsection@secnumdepth} \newcommand*\startsection@indent{% \scr@startsection@ulm@error\startsection@indent} \newcommand*\startsection@beforeskip{% \scr@startsection@ulm@error\startsection@beforeskip} \newcommand*\startsection@afterskip{% \scr@startsection@ulm@error\startsection@afterskip} \newcommand*{\if@startsection@runin}{% \scr@startsection@ulm@error\if@startsection@runin} \newif\if@startsection@runin \newcommand*\startsection@afterindent{% \scr@startsection@ulm@error\startsection@afterindent} % \end{macrocode} % \end{macro}^^A \scr@startsection@ulm@error % \end{macro}^^A \startsection@sectionname … \scr@startsection@runin % \begin{macro}{\At@startsection} % \changes{v3.14}{2014/09/11}{added} % \changes{v3.27}{2019/02/04}{using \cs{AddtoDoHook}} % \changes{v3.27}{2019/02/04}{deprecated} % This is deprecated now. You should use the corresponding % \dhook{heading/postinit} do hook. However the do hooks are command specific, % but the argument of \cs{At@startsection} is style specific. % \begin{macrocode} \newcommand*{\At@startsection}[1]{% \ClassInfo{\KOMAClassName}{% Usage of deprecated command `\string\At@startsection' mapped to\MessageBreak `\string\AddtoDoHook{heading/postinit} {...\string\@gobble}'% }% \AddtoDoHook{heading/postinit}{\scr@doonlyifstyleofargis{#1}{section}}% } % \end{macrocode} % \begin{macro}{\scr@doonlyifstyleofargis} % \changes{v3.27}{2019/02/04}{added} % Execute the first argument only, of the style of the third argument is the % second argument. % \begin{macrocode} \newcommand*{\scr@doonlyifstyleofargis}[3]{% \IfSectionCommandStyleIs{#3}{#2}{#1}{}% } % \end{macrocode} % \end{macro}^^A \scr@doonlyifstyleofargis % \end{macro}^^A \At@startsection % \begin{macro}{\Before@ssect} % \changes{v3.14}{2014/09/11}{added} % \changes{v3.27}{2019/02/04}{using \cs{AddtoDoHook}} % \changes{v3.27}{2019/02/04}{deprecated} % \changes{v3.35}{2021/10/15}{\cs{ClassWarning} instead of \cs{ClassInfo}} % \changes{v3.35}{2021/10/15}{Usage of \cs{scr@doonlyifstyleofargis} fixed} % This is deprecated now. You should use the corresponding % \dhook{heading/branch/star} do hook. However the do hooks are command % specific, but the argument of \cs{Before@ssect} is style specific. % \begin{macrocode} \newcommand*{\Before@ssect}[1]{% \ClassWarning{\KOMAClassName}{% Usage of deprecated command `\string\Before@ssect' mapped to\MessageBreak `\string\AddtoDoHook{heading/branch/star}% {...\string\@gobble}'% }% \AddtoDoHook{heading/branch/star}{\scr@doonlyifstyleofargis{#1}{section}}% } % \end{macrocode} % \end{macro}^^A \Before@ssect % \begin{macro}{\Before@sect} % \changes{v3.14}{2014/09/11}{added} % \changes{v3.27}{2019/02/04}{using \cs{AddtoDoHook}} % \changes{v3.27}{2019/02/04}{deprecated} % \changes{v3.35}{2021/10/15}{\cs{ClassWarning} instead of \cs{ClassInfo}} % \changes{v3.35}{2021/10/15}{Usage of \cs{scr@doonlyifstyleofargis} fixed} % This is deprecated now. You should use the corresponding % \dhook{heading/branch/nostar} do hook. However the do hooks are command % specific, but the argument of \cs{Before@sect} is style specific. % \begin{macrocode} \newcommand*{\Before@sect}[1]{% \ClassWarning{\KOMAClassName}{% Usage of deprecated command `\string\Before@sect' mapped to\MessageBreak `\string\AddtoDoHook{heading/branch/nostar}% {...\string\@gobble}'% }% \AddtoDoHook{heading/branch/nostar}{\scr@doonlyifstyleofargis{#1}{section}}% } % \end{macrocode} % \end{macro}^^A \Before@sect % \begin{macro}{\scr@section@dblarg,\scr@section@xdblarg} % \changes{v3.13a}{2014/09/11}{added} % Similar to the \LaTeX{} kernel macros \cs{@dblarg} and \cs{@xdblarg} but % preserve the definition of \cs{scr@osectarg}. So changes of % \cs{scr@osectarg} inside the definition of the command of the first % argument, are locally to the execution of that command. % \begin{macrocode} \newcommand{\scr@section@dblarg}[1]{% \kernel@ifnextchar[%] {#1}% {\scr@section@xdblarg{#1}}% } \newcommand{\scr@section@xdblarg}[2]{% \begingroup \edef\reserved@a{% \unexpanded{\endgroup\let\scr@osectarg\z@#1[{#2}]{#2}\def\scr@osectarg}% {\scr@osectarg}}% \reserved@a } % \end{macrocode} % \end{macro}^^A \scr@section@dblarg,\scr@section@xdblarg % \end{macro}^^A \scr@saved@startsection % \end{macro}^^A \scr@startsection % \begin{description} % \item[ToDo:] Currently we still redefine \cs{@startsection} to use either % \cs{scr@saced@startsection} or \cs{scr@startsection}. But it would be % better to not redefine a \LaTeX{} kernel macro. However, if not doing so, % packages, that use \cs{@startsection} would not support \KOMAScript{} % features without detecting \KOMAScript{} and using \cs{scr@startsection}. % \end{description} % \begin{macrocode} \renewcommand*{\@startsection}{% \ifnum \scr@osectarg=\z@ \expandafter\scr@saved@startsection \else \expandafter\scr@startsection \fi } % % \end{macrocode} % \end{macro}^^A \@startsection % % \begin{command}{\UseNumberUsageError} % \changes{v3.27}{2019/02/02}{added} % \begin{command}{\IfUseNumber} % \changes{v3.27}{2019/02/02}{error if used outside sectioning command} % Command \cs{IfUseNumner} is defined only inside sectioning commands. Using % it outside is not specified. To report an error in this case, it should be % set to \cs{UseNumberUsageError} outside a sectioning command. % \begin{macrocode} %<*body> \newcommand*{\UseNumberUsageError}[2]{% \ClassError{\KOMAClassName}{% \string\IfUseNumber\space not allowed% }{% You cannot use \string\IfUseNumber\space outside a heading.\MessageBreak If you'd continue, I'll ignore both arguments, because I do not know\MessageBreak whether to use the first or the second argument.% }% } \newcommand*{\IfUseNumber}[2]{}% \let\IfUseNumber\UseNumberUsageError % % \end{macrocode} % \end{command}^^A \IfUseNumnr % \end{command}^^A \UseNumberUsageError % % % \begin{command}{\SecDef} % \changes{v3.13a}{2014/09/11}{added} % \changes{v3.20}{2016/04/12}{\cs{@ifstar} replaced by \cs{kernel@ifstar}} % \begin{command}{\secdef} % \changes{v3.13a}{2014/09/11}{re-definition because of extended optional argument} % \begin{macrocode} %<*body> \newcommand*{\SecDef}[2]{\kernel@ifstar{#2}{\scr@section@dblarg{#1}}} \CheckCommand*{\secdef}[2]{\@ifstar{#2}{\@dblarg{#1}}} \let\secdef\SecDef % % \end{macrocode} % \end{command}^^A \secdef % \end{command}^^A \SecDef % \begin{macro}{\scr@sect} % \changes{v3.10}{2011/08/30}{removed} % \end{macro}^^A \scr@sect % \begin{macro}{\@sect} % \changes{v3.10}{2011/08/30}{re-definition because of extended optional argument} % \changes{v3.10}{2011/08/30}{using % \cs{csname}\texttt{add\#1tocentry}\cs{endcsname} % resp. \cs{addtocentrydefault}} % \changes{v3.18}{2015/05/20}{defines \cs{IfUsePrefixLine} locally} % \changes{v3.18}{2015/05/22}{using \cs{numexpr} for argument 2} % \changes{v3.18}{2015/05/22}{using \cs{gluexpr} for arguments 3--5} % \changes{v3.19}{2015/07/17}{using \cs{sectionlinesformat} and % \cs{sectioncatchphraseformat}} % \changes{v3.27}{2019/07/08}{new optional \opt{nonumber}} % \changes{v3.30}{2020/02/25}{orphan spaces removed} % \begin{macro}{\scr@latex@sect} % \changes{v3.27}{2019/07/24}{added to be used by \pkg*{scrhack}} % Because we want to support the extended optional argument for all commands % defined using \cs{@startsection} we also have to redefine \cs{@sect}. Once % again several security tests are done, before redefining an internal % \LaTeX{} kernel macro. % \begin{description} % \item[ToDo:] It would be better not to redefine an internal \LaTeX{} kernel % macro, but use a own definition in our own \cs{scr@startsection}. But in % this case packages, that use \cs{@sect} would not automatically support % several \KOMAScript{} features. % \item[Note:] \cs{chapter} and \cs{part} do not use \cs{@sect} but % \cs{SecDef}. % \end{description} % \begin{macrocode} %<*body> \def\scr@latex@sect#1#2#3#4#5#6[#7]#8{% \ifnum #2>\c@secnumdepth \let\@svsec\@empty \else \refstepcounter{#1}% \protected@edef\@svsec{\@seccntformat{#1}\relax}% \fi \@tempskipa #5\relax \ifdim \@tempskipa>\z@ \begingroup #6{% \@hangfrom{\hskip #3\relax\@svsec}% \interlinepenalty \@M #8\@@par}% \endgroup \csname #1mark\endcsname{#7}% \addcontentsline{toc}{#1}{% \ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}% \fi #7}% \else \def\@svsechd{% #6{\hskip #3\relax \@svsec #8}% \csname #1mark\endcsname{#7}% \addcontentsline{toc}{#1}{% \ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}% \fi #7}}% \fi \@xsect{#5}} \ifx\@sect\scr@latex@sect\else \let\scr@latex@sect\@sect \ClassWarning{\KOMAClassName}{% Unexpected definition of \string\@sect!\MessageBreak Please send information about this to\MessageBreak the KOMA-Script maintainer!\MessageBreak Maybe LaTeX will be broken by the redefinition\MessageBreak of \string\@sect}% \fi % \end{macrocode} % \end{macro}^^A \scr@latex@sect % \begin{macrocode} %\ClassInfo{\KOMAClassName}{redefining LaTeX kernel macro \string\@sect} \def\@sect#1#2#3#4#5#6[#7]#8{% \ifnum \scr@osectarg=\z@ \@scr@tempswafalse \else \scr@istest#7=\@nil \fi \@currentusenumbertrue \if@scr@tempswa \setkeys{KOMAarg.section}{tocentry={#8},head={#8},reference={#8},#7}% \else \ifcase \scr@osectarg\relax \setkeys{KOMAarg.section}{tocentry={#7},head={#7},reference={#7}}% \or \setkeys{KOMAarg.section}{tocentry={#8},head={#7},reference={#8}}% \or \setkeys{KOMAarg.section}{tocentry={#7},head={#8},reference={#7}}% \or \setkeys{KOMAarg.section}{tocentry={#7},head={#7},reference={#7}}% \fi \fi % \end{macrocode} % \changes{v3.23}{2017/02/04}{support for \pkg{minitoc}} % \changes{v3.23}{2017/03/24}{usage of \cs{ext@figure} and \cs{ext@table} % instead of \texttt{lof} and \texttt{lot}} % Add the \texttt{xsect} entries to \texttt{lof} and \texttt{lot}. Note, that % the original \cs{starsection} tests of \pkg{minitoc} has a bug and so % does not work. And the original code of \pkg{minitoc} has hard coded % \texttt{lot} and \texttt{lof} instead of \cs{ext@figure} and % \cs{ext@table}. This is a fixed one: % \begin{macrocode} \scr@ifundefinedorrelax{scr@mt@saved@sect}{}{% \expandafter\ifx\csname #1\endcsname\section \addcontentsline{\ext@figure}{xsect}{\@currenttocentry}% \addcontentsline{\ext@table}{xsect}{\@currenttocentry}% \fi \expandafter\ifx\csname #1\endcsname\starsection\relax \addcontentsline{\ext@figure}{xsect}{\@currenttocentry}% \addcontentsline{\ext@table}{xsect}{\@currenttocentry}% \fi }% \let\IfUsePrefixLine\@secondoftwo \ifcase \if@currentusenumber \ifnum \numexpr #2\relax>\c@secnumdepth \z@\else \@ne\fi \else \z@ \fi \let\@svsec\@empty % \end{macrocode} % \changes{v3.31}{2020/06/02}{execute counter reset list} % Even for not numbered sections, the reset list für the section counter has % to be executed. % \begin{macrocode} % \expandafter\ifnum\scr@v@is@ge{3.31}\relax \begingroup \let\@elt\@stpelt \csname cl@#1\endcsname \endgroup % \fi % \end{macrocode} % \changes{v3.31}{2020/06/02}{\cs{hy@insteadofrefstepcounter} added} % At this point we have to make sure, that the \pkg{hyperref} code for not % increasing a counter is executed. % \begin{macrocode} \hy@insteadofrefstepcounter{#1}% \else \refstepcounter{#1}% \expandafter\@maybeautodot\csname the#1\endcsname \protected@edef\@svsec{\@seccntformat{#1}\relax}% \fi % \end{macrocode} % \changes{v3.26}{2018/09/18}{support for \cs{scr@sect@runin}} % \changes{v3.27}{2019/02/02}{\cs{IfUseNumber} defined locally} % \begin{macrocode} \ifdim \scr@sect@runin{\z@}{\p@}{\glueexpr #5\relax}>\z@ \begingroup \ifx\@svsec\@empty \let\IfUseNumber\@secondoftwo \else \let\IfUseNumber\@firstoftwo \fi % \end{macrocode} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \changes{v3.27}{2019/02/02}{\cs{scr@do@at} added} % \begin{macrocode} \ExecuteDoHook{heading/begingroup/#1}% #6{\nobreak\interlinepenalty \@M \sectionlinesformat{#1}{\glueexpr #3\relax}\@svsec{#8}\@@par}% \ExecuteDoHook{heading/endgroup/#1}% \endgroup %<*trace> \ClassInfo{\KOMAClassName}{% head=`\detokenize\expandafter{\@currentheadentry}'\MessageBreak tocentry=`\detokenize\expandafter{\@currenttocentry}'\MessageBreak reference=`\detokenize\expandafter{\@currentlabelname}'}% % \expandafter\csname #1mark\expandafter\endcsname\expandafter{\@currentheadentry}% \ifx\@currenttocentry\@empty\else \scr@ifundefinedorrelax{add#1tocentry}{% \expandafter\gdef\csname add#1tocentry\endcsname##1##2{% \addtocentrydefault{#1}{##1}{##2}% }% }{}% \ifcase \if@currentusenumber \ifnum \numexpr #2\relax>\c@secnumdepth \z@\else \@ne\fi \else \z@ \fi \csname add#1tocentry\endcsname{}{\@currenttocentry}% \else % \end{macrocode} % \changes{v3.31}{2020/06/06}{using \cs{\dots tocformat}}% % \begin{description} % \item[ToDo:] Move \cs{autodot} to the definition of \cs{\dots tocformat}. % \end{description} % \begin{macrocode} \@ifundefined{#1tocformat}{% \expandafter\gdef\csname #1tocformat\endcsname {\csname the#1\endcsname}% }{}% \csname add#1tocentry\endcsname{\csname #1tocformat\endcsname}{% \@currenttocentry}% \fi \fi \else % \end{macrocode} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \changes{v3.27}{2019/02/02}{\cs{ExecuteDoHook} added} % \begin{macrocode} \def\@svsechd{% \ifx\@svsec\@empty \let\IfUseNumber\@secondoftwo \else \let\IfUseNumber\@firstoftwo \fi \ExecuteDoHook{heading/begingroup/#1}% #6{\nobreak\sectioncatchphraseformat{#1}{\glueexpr #3\relax}\@svsec{#8}}% %<*trace> \ClassInfo{\KOMAClassName}{% head=`\detokenize\expandafter{\@currentheadentry}'\MessageBreak tocentry=`\detokenize\expandafter{\@currenttocentry}'\MessageBreak reference=`\detokenize\expandafter{\@currentlabelname}'}% % \expandafter\csname #1mark\expandafter\endcsname \expandafter{\@currentheadentry}% \ifx\@currenttocentry\@empty\else \scr@ifundefinedorrelax{add#1tocentry}{% \expandafter\gdef\csname add#1tocentry\endcsname####1####2{% \addtocentrydefault{#1}{####1}{####2}% }% }{}% \ifcase \if@currentusenumber \ifnum \numexpr #2\relax>\c@secnumdepth \z@\else \@ne\fi \else \z@ \fi \csname add#1tocentry\endcsname{}{\@currenttocentry}% \else % \end{macrocode} % \changes{v3.31}{2020/06/06}{using \cs{\dots tocformat}}% % \begin{description} % \item[ToDo:] Move \cs{autodot} to the definition of \cs{\dots tocformat}. % \end{description} % \begin{macrocode} \@ifundefined{#1tocformat}{% \expandafter\gdef\csname #1tocformat\endcsname {\csname the#1\endcsname}% }{}% \csname add#1tocentry\endcsname{\csname #1tocformat\endcsname}{% \@currenttocentry}% \fi \fi \ExecuteDoHook{heading/endgroup/#1}% }% \fi \let\IfUsePrefixLine\scr@IfUsePrefixLineWarning \@xsect{\glueexpr #5\relax}% } % \end{macrocode} % \begin{macro}{\scr@ds@tocentry,\@currenttocentry} % \changes{v3.10}{2011/08/30}{added} % \changes{v3.22}{2016/07/12}{\cs{scr@ds@tocentry} renamed to \cs{@currenttocentry}} % \begin{macro}{\scr@ds@head,\@currentheadentry} % \changes{v3.10}{2011/08/30}{added} % \changes{v3.22}{2016/07/12}{\cs{scr@ds@head} renamed to \cs{@currentheadentry}} % \begin{macro}{\@currentlabelname} % \changes{v3.22}{2016/07/12}{added} % \begin{macro}{\@scr@tempswatrue,\@scr@tempswafalse,\if@scr@tempswa} % \changes{v3.10}{2011/08/30}{added} % \begin{macro}{\@currentusenumbertrue,\@currentusenumberfalse,\if@currentusenumber} % \changes{v3.27}{2019/07/08}{added} % \begin{macro}{\scr@istest} % \changes{v3.10}{2011/08/30}{added} % We are using several \pkg*{scrbase} options to handle the extended % optional argument features. % \begin{description} % \item[ToDo:] Is there a general initialization hook to make additional such % options at package author level possible? % \end{description} % \begin{macrocode} \DefineFamily{KOMAarg} \DefineFamilyMember[.section]{KOMAarg} \providecommand*\@currenttocentry{} \providecommand*\@currentheadentry{} \providecommand*\@currentlabelname{} \FamilyStringKey[.section]{KOMAarg}{tocentry}{\@currenttocentry} \FamilyStringKey[.section]{KOMAarg}{head}{\@currentheadentry} \IfLTXAtLeastTF{2020/10/01}{% \NewHook{\KOMAClassName/option/section/reference/fallback}% }{}% \DefineFamilyKey[.section]{KOMAarg}{reference}{% \scr@ifundefinedorrelax{NR@gettitle}{% \scr@ifundefinedorrelax{GetTitleString}{% % \end{macrocode} % \changes{v3.41}{2023/06/29}{substitute definition of \cs{@currentlabelname} % changed} % This case is complicated. Up to \LaTeX{} 2022/11/01 it was good enough to % use: % \begin{verbatim} % \def\@currentlabelname{#1} % \end{verbatim} % But from \LaTeX{} 2023/06/01 the kernel definition of \cs{label} % additionally writes \cs{@currentlabelname} to the \file{aux}-file. So this % breaks, if \cs{label} is part of the argument, because it results in an % infinite expansion loop. To avoid this, the code has been changed. To % remove \cs{label}, \cs{index}, \cs{glossary}. % \begin{description} % \item[ToDo:] The current \cs{@currentlabelname} code is only a workaround % for \href{https://sourceforge.net/p/koma-script/tickets/55/}{issue 55}. % Maybe using an empty value would be better. But in this case, what to do % with \cs{TG@gettitle} and \cs{ztitlerefsetup}? % \end{description} % \begin{macrocode} \begingroup \let\label\@gobble \let\index\@gobble \let\glossary\@gobble \scr@ifundefinedorrelax{UseHook}{}{% \UseHook{\KOMAClassName/option/section/reference/fallback}% }% \protected@edef\@currentlabelname{#1}% \expandafter\expandafter\expandafter\endgroup \expandafter\def\expandafter\@currentlabelname\expandafter{% \@currentlabelname}% }{% \GetTitleString{#1}% \let\@currentlabelname\GetTitleStringResult }% }{% \NR@gettitle{#1}% }% \scr@ifundefinedorrelax{TR@gettitle}{}{% \expandafter\TR@gettitle\expandafter{\@currentlabelname}% }% \scr@ifundefinedorrelax{ztitlerefsetup}{}{% \ztitlerefsetup{title=\@currentlabelname}% }% \FamilyKeyStateProcessed } \FamilyInverseBoolKey[.section]{KOMAarg}{nonumber}{@currentusenumber} \newcommand*{\scr@istest}{} \def\scr@istest#1=#2\@nil{% \ifx\relax#2\relax\@scr@tempswafalse\else\@scr@tempswatrue\fi } \newif\if@scr@tempswa % \end{macrocode} % \end{macro}^^A \scr@istest % \end{macro}^^A \if@currentusenumber % \end{macro}^^A \if@scr@tempswa % \end{macro}^^A \@currentlabelname % \end{macro}^^A \scr@ds@head,\@currentheadentry % \end{macro}^^A \scr@ds@tocentry,\@currenttocentry % % \begin{command}{\sectionlinesformat,\sectioncatchphraseformat} % \changes{v3.19}{2015/07/17}{added} % Headings with style \texttt{section} can either be free-standing or % in-line. Free-standing headings are printed using: % \begin{quote} % \cs{sectionlinesformat}\marg{level name}\marg{indent}\marg{number}\marg{text} % \end{quote} % The in-line headings are printed using: % \begin{quote} % \cs{sectioncatchphraseformat}\marg{level name}\marg{indent}\marg{number}\marg{text} % \end{quote} % The \meta{level name} can also be interpreted as the section command % name. The \meta{indent} is the horizontal indent of the first line of the % heading. The \meta{number} is either empty for not numbered headings or the % formatted number to be used. \meta{text} is the formatted text to be % used. Formatted text means, the fonts are already set and \cs{@@par} for the % end of paragraph already has been added to the \meta{text} of % \cs{sectionlinesformat}. But if the user uses more paragraphs than this % final one, the user is responsible to prevent page breaks! % \begin{description} % \item[Note:] Argument \meta{indent} is a kind of design mistake. It would % have been better to get the indent by the attributes of the \meta{level % name}. However having an argument makes it easier for users to redefine % the command. % \end{description} % \begin{macrocode} \newcommand{\sectionlinesformat}[4]{% \@hangfrom{\hskip #2#3}{#4}% } \newcommand{\sectioncatchphraseformat}[4]{% \hskip #2#3#4% } % \end{macrocode} % \end{command}^^A \sectionlinesformat,\sectioncatchphraseformat % \end{macro}^^A \@sect % % \begin{macro}{\@ssect} % \changes{v3.19}{2015/07/17}{re-definition because of several new features} % \begin{macro}{\scr@latex@ssect} % \changes{v3.27}{2019/07/24}{added to be used by \pkg*{scrhack})} % \changes{v3.30}{2020/02/25}{orphan space removed} % The star variant of section commands do not use \cs{@sect} but % \cs{@ssect}. Here we have the problem, that the command name argument is % missing. The whole definition is very similar to \cs{@sect} but without a % number, ToC entry or running head. % \begin{description} % \item[Note:] we do not have to support an extended optional argument, % because there isn't an optional argument. % \item[ToDo:] It would be better not to redefine an internal \LaTeX{} kernel % macro, but use a own definition in our own \cs{scr@startsection}. But in % this case packages, that use \cs{@ssect} would not automatically support % several \KOMAScript{} features. % \item[Note:] \cs{chapter} and \cs{part} do not use \cs{@ssect} but % \cs{SecDef}. % \end{description} % \begin{macrocode} \def\scr@latex@ssect#1#2#3#4#5{% \@tempskipa #3\relax \ifdim \@tempskipa>\z@ \begingroup #4{% \@hangfrom{\hskip #1}% \interlinepenalty \@M #5\@@par}% \endgroup \else \def\@svsechd{#4{\hskip #1\relax #5}}% \fi \@xsect{#3}} \ifx\@ssect\scr@latex@ssect \else \let\scr@latex@ssect\@ssect \ClassWarning{\KOMAClassName}{% Unexpected definition of \string\@ssect!\MessageBreak Please send information about this to\MessageBreak the KOMA-Script maintainer!\MessageBreak Maybe LaTeX will be broken by the redefinition\MessageBreak of \string\@ssect}% \fi % \end{macrocode} % \end{macro}^^A \scr@latex@ssect % \begin{macrocode} %\ClassInfo{\KOMAClassName}{redefining LaTeX kernel macro % \string\@ssect} \def\@ssect#1#2#3#4#5{% \scr@ifundefinedorrelax{scr@s@ct@@nn@m@}{% \ClassWarning{\KOMAClassName}{Incompatible usage of \string\@ssect\space detected.\MessageBreak You've used the KOMA-Script implementation of \string\@ssect\MessageBreak from within a non compatible caller, that does not\MessageBreak \string\scr@s@ct@@nn@m@\space locally.\MessageBreak This could result in several error messages}% \def\scr@s@ct@@nn@m@{\string\scr@s@ct@@nn@m@}% }{% % \end{macrocode} % \changes{v3.31}{2020/06/02}{execute counter reset list} % Even for not numbered sections, the reset list für the corresponding section % counter has to be executed. % \begin{macrocode} % \expandafter\ifnum\scr@v@is@ge{3.31}\relax \begingroup \let\@elt\@stpelt \csname cl@\scr@s@ct@@nn@m@\endcsname \endgroup % \fi }% % \end{macrocode} % \changes{v3.26}{2018/09/18}{support for \cs{scr@sect@runin}} % \changes{v3.27}{2019/02/02}{defining \cs{IfUseNumber} locally} % \begin{macrocode} \ifdim \scr@sect@runin{\z@}{\p@}{\glueexpr #3\relax}>\z@ \begingroup \let\IfUseNumber\@secondoftwo % \end{macrocode} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \changes{v3.27}{2019/02/02}{\cs{ExecuteDoHook} added} % \begin{macrocode} \edef\reserved@a{% \noexpand\ExecuteDoHook{heading/begingroup/\scr@s@ct@@nn@m@}% }\reserved@a #4{\nobreak\interlinepenalty \@M \expandafter\sectionlinesformat\expandafter{\scr@s@ct@@nn@m@}% {\glueexpr #1\relax}\@empty{#5}\@@par}% \edef\reserved@a{% \noexpand\ExecuteDoHook{heading/endgroup/\scr@s@ct@@nn@m@}% }\reserved@a \endgroup \else \edef\@svsechd{% \unexpanded{\let\IfUseNumber\@secondoftwo}% \noexpand\ExecuteDoHook{heading/begingroup/\scr@s@ct@@nn@m@}% \unexpanded{#4}{% % \end{macrocode} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \begin{macrocode} \noexpand\nobreak \noexpand\sectioncatchphraseformat{\scr@s@ct@@nn@m@}% \unexpanded{{\glueexpr #1\relax}\@empty{#5}}% }% \noexpand\ExecuteDoHook{heading/endgroup/\scr@s@ct@@nn@m@}% }% \fi \let\scr@s@ct@@nn@m@\relax \@xsect{\glueexpr #3\relax}% } % % \end{macrocode} % \end{macro}^^A \@ssect % \begin{macro}{\@xsect} % \changes{v3.26}{2018/09/18}{re-definition} % \changes{v3.30}{2020/02/25}{orphan space removed} % \begin{macro}{\scr@latex@xsect} % \changes{v3.27}{2019/07/24}{added to be used by \pkg*{scrhack}} % We need a differentiation with \cs{scr@sect@runin} to be initialized in % \cs{@xsect} and also need to reset this internal macro at the end. % \begin{description} % \item[ToDo:] It would be better not to redefine the internal \LaTeX{} kernel % macro, but to define and use our own one. % \end{description} % \begin{macrocode} %<*body> \def\scr@latex@xsect#1{% \@tempskipa #1\relax \ifdim \@tempskipa>\z@ \par \nobreak \vskip \@tempskipa \@afterheading \else \@nobreakfalse \global\@noskipsectrue \everypar{% \if@noskipsec \global\@noskipsecfalse {\setbox\z@\lastbox}% \clubpenalty\@M \begingroup \@svsechd \endgroup \unskip \@tempskipa #1\relax \hskip -\@tempskipa \else \clubpenalty \@clubpenalty \everypar{}% \fi}% \fi \ignorespaces } \ifx\@xsect\scr@latex@xsect\else \let\scr@latex@xsect\@xsect \ClassWarning{\KOMAClassName}{% Unexpected definition of \string\@xsect!\MessageBreak Please send information about this to\MessageBreak the KOMA-Script maintainer!\MessageBreak Maybe LaTeX will be broken by the redefinition\MessageBreak of \string\@xsect}% \fi % \end{macrocode} % \end{macro}^^A \scr@latex@xsect % \begin{macrocode} %\ClassInfo{\KOMAClassName}{redefining LaTeX kernel macro % \string\@xsect} \def\@xsect#1{% \@ifundefined{scr@sect@runin}{% \def\scr@sect@runin##1##2##3{##3}% }% \@tempskipa #1\relax \ifdim \scr@sect@runin{\z@}{\p@}{\@tempskipa}>\z@ \par \nobreak \vskip \@tempskipa \@afterheading \else \@nobreakfalse \global\@noskipsectrue \everypar{% \if@noskipsec \global\@noskipsecfalse {\setbox\z@\lastbox}% \clubpenalty\@M \begingroup \@svsechd \endgroup \unskip \@tempskipa #1\relax \ifdim \@tempskipa<\z@ \hskip -\@tempskipa \else \hskip \@tempskipa \fi \else \clubpenalty \@clubpenalty \everypar{}% \fi}% \fi \def\scr@sect@runin##1##2##3{##3}% \ignorespaces } % % \end{macrocode} % \end{macro}^^A \@xsect % % \begin{command}{\IfUsePrefixLine} % \changes{v3.18}{2015/06/09}{added} % \begin{macro}{\scr@IfUsePrefixLineWarning} % \changes{v3.18}{2015/06/09}{added} % This command makes sense inside the section commands only. But users often % tried to use it outside instead of \cs{ifnumbered}. This mostly has resulted % in a undefined command sequence error users did not understand. So now, we % use an internal definition to be uses outside the section commands, that % results in a warning with more information about the mistake and that does % neither use the first nor the second argument (instead of using both of them). % \begin{macrocode} %<*body> \newcommand*{\scr@IfUsePrefixLineWarning}[2]{% \ClassWarning{\KOMAClassName}{% Usage of \string\IfUsePrefixLine\space outside section command\MessageBreak style makes no sense, because the behaviour not only\MessageBreak depends on class options but also on the run-time\MessageBreak section command style.\MessageBreak Neither the then-code nor the else-code will be\MessageBreak executed.\MessageBreak You may change this and avoid the warning by LOCALLY\MessageBreak setting \string\IfUsePrefixLine\space to either \string\@firstoftwo\space or\MessageBreak \string\@secondoftwo\space before using it% }% } \newcommand*{\IfUsePrefixLine}[2]{} \let\IfUsePrefixLine\scr@IfUsePrefixLineWarning % % \end{macrocode} % \end{macro}^^A \scr@IfUsePrefixLineWarning % \end{command}^^A \IfUsePrefixLine % % % \begin{command}{\raggedsection} % \changes{v2.3h}{1996/01/20}{added} % Should be either \cs{raggedleft}, \cs{raggedright}, \cs{centering} or % empty. Empty means no change, which is usually justified. Users could also % use other alignment/justification commands like the commands of package % \pkg{ragged2e}. The initial value is \cs{raggedright}. % \begin{description} % \item[Note:] We are here in the class. So usually \cs{raggedright} is the % \cs{raggedright} of the \LaTeX{} kernel. This also means: no hyphenation. % \item[Note:] We define is already here, because it is not only used for % style \texttt{section} but also as initial default of the \emph{higher % level} styles. % \end{description} % \begin{macrocode} %<*body> \newcommand*{\raggedsection}{} \let\raggedsection\raggedright % % \end{macrocode} % \end{command}^^A \raggedsection % % % All the options of \cs{DeclareSectionCommand} are options of family % \texttt{KOMAarg} member \texttt{.dsc}. % \begin{macrocode} %<*body> \DefineFamily{KOMAarg} \DefineFamilyMember[.dsc]{KOMAarg} % \end{macrocode} % \begin{command}{\DeclareSectionCommandStyleOption} % \changes{v3.17}{2015/03/23}{added} % \begin{command}{\AddToSectionCommandOptionsDoList,\RelaxSectionCommandOptions} % \changes{v3.20}{2015/11/18}{added} % \begin{macro}{\@AddToSectionCommandOptionsDoList,\scr@dsc@doopts} % \changes{v3.20}{2015/11/18}{added} % The basic command to define a section command style option is: % \begin{quote} % \cs{DeclareSectionCommandStyleOption}\marg{style}\marg{option}\marg{definition} % \end{quote} % Is similar to a corresponding \cs{DefineFamilyKey}. But the option % definition is not done immediately but added to % \cs{scr@dsc@style@\meta{style}@options} which is executed later inside % \cs{DeclareSectionCommand} after detection of the \opt{style} option. The % option is also added to the \emph{section command options do list} of % \cs{scr@dsc@doopts} using % \begin{quote} % \cs{AddToSectionCommandOptionsDoList}\marg{option} % \end{quote} % This is used, e.g., to relax all options inside \cs{DeclareSectionCommand} % using \cs{RelaxSectionCommandOptions} to not have options defined, that are % used by one style, while declaring a command of another style, that does not % support the option. % \begin{description} % \item[Note:] We also could have used another option member for every style % to avoid such problems. With \LaTeX3 also usage of % \pkg[https://www.ctan.org/pkg/l3kernel]{l3keys}, which provides a kind of % hierarchical options, would have been possible. % \end{description} % \begin{macrocode} \newcommand*{\DeclareSectionCommandStyleOption}[3]{% \AddToSectionCommandOptionsDoList{#2}% \expandafter\g@addto@macro\csname scr@dsc@style@#1@options\endcsname{% \DefineFamilyKey[.dsc]{KOMAarg}{#2}{#3}% }% } \newcommand*{\AddToSectionCommandOptionsDoList}[1]{% \kernel@ifnextchar [%] {\@AddToSectionCommandOptionListWithDefault{#1}}% {\l@addto@macro\scr@dsc@doopts{\do{#1}}}% } \newcommand*{\@AddToSectionCommandOptionListWithDefault}{} \def\@AddToSectionCommandOptionListWithDefault#1[#2]{% \l@addto@macro\scr@dsc@doopts{\do[{#2}]{#1}} }% \newcommand*{\scr@dsc@doopts}{} \newcommand*{\RelaxSectionCommandOptions}{% \begingroup \def\do@endgroup{\endgroup}% \def\do{% \kernel@ifnextchar [%] {\@do}% {\@do[]}% }% \def\@do[##1]##2{% \l@addto@macro\do@endgroup{\RelaxFamilyKey[.dsc]{KOMAarg}{##2}}% }% \scr@dsc@doopts \do@endgroup } % \end{macrocode} % \end{macro}^^A \@AddToSectionCommandOptionsListWithDefault,\scr@dsc@dooptions % \end{command}^^A \AddToSectionCommandOptionsDoList,\RelaxSectionCommandOptions % \end{command}^^A \DeclareSectionCommandStyleOption % We provide several kinds of options: % \begin{command}{\DeclareSectionCommandDummyOption} % \changes{v3.17}{2015/03/23}{added} % \changes{v3.20}{2015/11/18}{removed} % \end{command}^^A \DeclareSectionCommandDummyOption % \begin{command}{\DeclareSectionCommandStyleLengthOption, % \DeclareSectionCommandStyleNumberOption, % \DeclareSectionCommandStyleFontOption} % \changes{v3.17}{2015/03/23}{added} % \changes{v3.20}{2016/04/25}{argument expansion} % \changes{v3.38}{2022/09/16}{copy option added} % All these commands have the four arguments: % \begin{quote} % \marg{style}\marg{option}\marg{prefix}\marg{postfix} % \end{quote} % Most of the commands all correspond to \pkg*{scrbase} option declaration % commands: % \begin{center} % \begin{tabular}{lll} % \cs{DeclareSectionCommand} & \pkg*{scrbase} & meaning \\\hline % \cs{DeclareSectionCommandStyleLengthOption} % & \cs{FamilyLengthMacroKey} & length option\\ % \cs{DeclareSectionCommandStyleNumberOption} % & \cs{FamilyCounterMacroKey} & numerical option\\ % \cs{DeclareSectionCommandStyleFontOption} % & & font element option\\ % \end{tabular} % \end{center} % The \meta{macro} of the corresponding \pkg*{scrbase} command is build by % \meta{prefix}\cs{scr@dsc@current}\meta{postfix}. For % \cs{DeclareSectionCommandStyleOption} the build name is the font % element instead. However, before using (setting) the option, % \cs{scr@dsc@current} has to be defined to be \meta{level name} % (aka \emph{section command name}). Depending on \cs{ifscr@dsc@expandtopt} % (see option \opt{expandtopt}) lengths given as argument to the option of % \cs{DeclareSectionCommandStyleLengthOption} is expanded to a \texttt{pt} % value instead of used as it is. % \begin{macrocode} \newcommand*{\DeclareSectionCommandStyleLengthOption}[4]{% \DeclareSectionCommandStyleOption{#1}{#2}{% \protected@edef\reserved@a{% \noexpand\FamilySetLength{KOMAarg}{#2}{\noexpand\@tempskipa}{##1}% }\reserved@a \ifx\FamilyKeyState\FamilyKeyStateProcessed \ifscr@dsc@expandtopt \expandafter\edef\csname #3\scr@dsc@current#4\endcsname{% \the\@tempskipa}% \else \expandafter\edef\csname #3\scr@dsc@current#4\endcsname{##1}% \fi \fi }% \DeclareSectionCommandStyleOption{#1}{#2:}{% \scr@ifundefinedorrelax{#3##1#4}{\FamilyKeyStateUnknownValue}{% \ifscr@dsc@expandtopt \setlength{\@tempskipa}{\@nameuse{#3##1#4}}% \expandafter\edef\csname #3\scr@dsc@current#4\endcsname{\the\@tempskipa}% \else \@namedef{#3\scr@dsc@current#4}{\@nameuse{#3##1#4}}% \fi \FamilyKeyStateProcessed }% }% } \newcommand*{\DeclareSectionCommandStyleNumberOption}[4]{% \DeclareSectionCommandStyleOption{#1}{#2}{% \protected@edef\reserved@a{% \noexpand\FamilySetCounterMacro{KOMAarg}{#2}{\noexpand\reserved@a}{##1} }\reserved@a \ifx\FamilyKeyState\FamilyKeyStateProcessed \expandafter\let\csname #3\scr@dsc@current#4\endcsname\reserved@a \fi }% \DeclareSectionCommandStyleOption{#1}{#2:}{% \scr@ifundefinedorrelax{#3##1#4}{\FamilyKeyStateUnknownValue}{% \ifscr@dsc@expandtopt \@tempcnta=\@nameuse{#3##1#4}% \expandafter\edef\csname #3\scr@dsc@current#4\endcsname{\the\@tempcnta}% \else \@namedef{#3\scr@dsc@current#4}{\@nameuse{#3##1#4}}% \fi \FamilyKeyStateProcessed }% }% } \newcommand*{\DeclareSectionCommandStyleFontOption}[4]{% \DeclareSectionCommandStyleOption{#1}{#2}{% \IfExistskomafont{#3\scr@dsc@current#4}{% \setkomafont }{% \newkomafont }{#3\scr@dsc@current#4}{##1}% \FamilyKeyStateProcessed }% \DeclareSectionCommandStyleOption{#1}{#2:}{% \IfExistskomafont{#3##1#4}{% \IfExistskomafont{#3\scr@dsc@current#4}{% \setkomafont }{% \newkomafont }{#3\scr@dsc@current#4}{\usekomafont{#3##1#4}}% \FamilyKeyStateProcessed }{\FamilyKeyStateUnknownValue}% }% } % \end{macrocode} % \end{command}^^A \DeclareSectionCommandStyleLengthOption … % \begin{command}{\DeclareSectionCommandStyleFuzzyOption} % \changes{v3.26}{2018/09/18}{added} % \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} % \changes{v3.38}{2022/09/16}{copy option added} % We also have a kind of fuzzy option. A fuzzy option defined by % \begin{quote} % \cs{DeclareSectionCommandStyleFuzzyOption}\meta{style}\meta{option}% % \meta{prefix}\meta{postfix}\meta{also} % \end{quote} % is an option, that provides three values: \texttt{true} (and the aliases % \texttt{on} and \texttt{yes}), \texttt{false} (and the aliases \texttt{off} % and \texttt{no}), and a third one \meta{also}. It defines a macro with the % name \meta{prefix}\cs{scr@dsc@current}\meta{postfix} and three arguments. If % the option is true, the macro expands to the first argument. If the option % is false, the macro expands to the second argument. If the option is % \meta{also} the macro expands to the third argument. % \begin{macrocode} \newcommand*{\DeclareSectionCommandStyleFuzzyOption}[5]{% \DeclareSectionCommandStyleOption{#1}{#2}{% \FamilySetBool{KOMAarg}{#2}{@tempswa}{##1}% \ifx\FamilyKeyState\FamilyKeyStateProcessed \if@tempswa \expandafter\def\csname #3\scr@dsc@current#4\endcsname ####1####2####3{####1}% \else \expandafter\def\csname #3\scr@dsc@current#4\endcsname ####1####2####3{####2}% \fi \else \Ifstr{##1}{#5}{% \expandafter\def\csname #3\scr@dsc@current#4\endcsname ####1####2####3{####3}% \FamilyKeyStateProcessed }{}% \fi }% \DeclareSectionCommandStyleOption{#1}{#2:}{% \scr@ifundefinedorrelax{#3##1#4}{\FamilyKeyStateUnknownValue}{% \ifscr@dsc@expandtopt \expandafter\let\csname #3\scr@dsc@current#4\expandafter\endcsname \csname #3##1#4\endcsname \else \expandafter\def\csname #3\scr@dsc@current#4\endcsname{% \@nameuse{#3##1#4}% }% \fi \FamilyKeyStateProcessed }% }% } % \end{macrocode} % \end{command}^^A \DeclareSectionCommandStyleFuzzyOptions % % These types of options are used to define all the options of a style, e.g., % \begin{macro}{\scr@dsc@style@section@options} % \changes{v3.17}{2015/03/23}{added} % the option declarations of style \texttt{section}: % \begin{macrocode} \newcommand*{\scr@dsc@style@section@options}{} % \end{macrocode} % \begin{description} % \item[\opt{indent=\meta{length}}:] % the left indent of the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{section} {indent}{scr@}{@sectionindent} % \end{macrocode} % \begin{description} % \item[\opt{afterindent=\meta{fuzzy}}:] % \changes{v3.26}{2018/09/18}{option \opt{afterindent}} % fuzzy logic. A boolean value states whether to indent the first line % after the heading. With additional \opt{afterindent=bysign} the decision % depends on the sign of \opt{beforeskip}. Negative values of % \opt{beforeskip} result in no paragraph indent. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFuzzyOption{section} {afterindent}{scr@}{@afterindent} {bysign} % \end{macrocode} % \begin{description} % \item[\opt{beforeskip=\meta{length}}:] % The vertical distance before the heading. If \opt{afterindent=bysign}, the % absolute value of \meta{length} is used. Otherwise the \meta{length} can % also be negative to move up the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{section} {beforeskip}{scr@}{@beforeskip} % \end{macrocode} % \begin{description} % \item[\opt{runin=\meta{fuzzy}}:] % \changes{v3.26}{2018/09/18}{option \opt{runin}} % fuzzy logic. A boolean value states whether the heading is run-in (or % free-standing). With additional \opt{runin=bysign} the decision depends on % the sign of \opt{afterskip}. Negative values of \opt{afterskip} result in % a run-in heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFuzzyOption{section} {runin}{scr@}{@runin} {bysign} % \end{macrocode} % \begin{description} % \item[\opt{afterskip=\meta{length}}:] % In case of a run-in heading (see option \opt{runin}) the horizontal % distance after the heading. In case of a free-standing heading the % vertical distance after the heading. If the run-in heading is activated by % a negative \meta{length}, the absolute value is used. Otherwise the % \meta{length} can also be negative, which usually does not make much % sense. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{section} {afterskip}{scr@}{@afterskip} % \end{macrocode} % \begin{description} % \item[\opt{font=\meta{font settings}}:] % The font setting for the font element of the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFontOption{section}{font}{}{} % \end{macrocode} % \end{macro}^^A \scr@dsc@style@section@options % \begin{macro}{\scr@dsc@def@style@section@command} % \changes{v3.18}{2015/05/21}{added} % \changes{v3.20}{2016/01/19}{inline section test fixed} % Macro % \begin{quote} % \cs{scr@dsc@def@style@section@command}\marg{command name} % \end{quote} % defines a section command \cs{\meta{command name}} of style % \texttt{section}. % \begin{description} % \item[Note:] Here we already use our own \cs{scr@startsection} instead of % \cs{@startsection}. So maybe not redefining \cs{@startsection} or % redefining \cs{@startsection} only optionally wouldn't be a big step. % \end{description} % \begin{macrocode} \newcommand*{\scr@dsc@def@style@section@command}[1]{% \@namedef{#1}{% \scr@startsection{#1}% {\csname #1numdepth\endcsname}% {\csname scr@#1@sectionindent\endcsname}% {\csname scr@#1@beforeskip\endcsname}% {\csname scr@#1@afterskip\endcsname}% {% \ifdim\glueexpr\csname scr@#1@afterskip\endcsname >\z@ % \expandafter\ifnum\scr@v@is@gt{2.96}\relax \setlength{\parfillskip}{\z@ plus 1fil}% % \fi \fi \raggedsection\normalfont\sectfont\nobreak \usekomafont{#1}% }% }% } % \end{macrocode} % \end{macro}^^A \scr@dsc@def@style@section@command % % \begin{macro}{\scr@dsc@style@chapter@options} % \changes{v3.17}{2015/03/23}{added} % Now, the option declaration of style \texttt{chapter} (similar, but not the % same): % \begin{macrocode} %<*book|report> \newcommand*{\scr@dsc@style@chapter@options}{} % \end{macrocode} % \begin{description} % \item[\opt{pagestyle=\meta{name}}:] % The page style, that should be used for the starting page of the chapter % like outline level. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleOption{chapter}{pagestyle}{% \@namedef{\scr@dsc@current pagestyle}{#1}% \FamilyKeyStateProcessed }% % \end{macrocode} % \begin{description} % \item[\opt{afterindent=\meta{fuzzy}}:] % \changes{v3.26}{2018/09/18}{option \opt{afterindent}} % fuzzy logic. A boolean value states whether to indent the first line % after the heading. With additional \opt{afterindent=bysign} the decision % depends on the sign of \opt{beforeskip}. Negative values of % \opt{beforeskip} result in no paragraph indent. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFuzzyOption{chapter} {afterindent}{scr@}{@afterindent} {bysign} % \end{macrocode} % \begin{description} % \item[\opt{beforeskip=\meta{length}}:] % The vertical distance before the heading. If \opt{afterindent=bysign}, the % absolute value of \meta{length} is used. Otherwise the \meta{length} can % also be negative to move up the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{chapter} {beforeskip}{scr@}{@beforeskip} % \end{macrocode} % \begin{description} % \item[\opt{innerskip=\meta{length}}:] % The vertical distance between the prefix line and the text (if a prefix % line is used). % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{chapter} {innerskip}{scr@}{@innerskip} % \end{macrocode} % \begin{description} % \item[\opt{afterskip=\meta{length}}:] % The vertical distance after the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{chapter} {afterskip}{scr@}{@afterskip} % \end{macrocode} % \begin{description} % \item[\opt{font=\meta{font settings}}:] % The font setting for the font element of the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFontOption{chapter}{font}{}{} % \end{macrocode} % \begin{description} % \item[\opt{prefixfont=\meta{font settings}}:] % The font setting for the font element of the prefix line of the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFontOption{chapter}{prefixfont}{}{prefix} % \end{macrocode} % \end{macro}^^A \scr@dsc@style@chapter@options % \begin{macro}{\scr@dsc@def@style@chapter@command} % \changes{v3.18}{2015/05/22}{added} % Macro % \begin{quote} % \cs{scr@dsc@def@style@chapter@command}\marg{command name} % \end{quote} % defines a section command \cs{\meta{command name}} of style % \texttt{chapter}. We need some more macros to be initialized than with % \cs{scr@dsc@def@style@section@command}. % \begin{description} % \item[ToDo:] Make a more generic (and general) interface for this. % \end{description} % \begin{macrocode} \newcommand*{\scr@dsc@def@style@chapter@command}[1]{% \@namedef{#1}{\scr@startchapter{#1}}% \@namedef{@#1}{\scr@@startchapter{#1}}% \@namedef{@s#1}{\scr@@startschapter{#1}}% \@namedef{@make#1head}{\scr@makechapterhead{#1}}% \@namedef{@makes#1head}{\scr@makeschapterhead{#1}}% \@namedef{@@make#1head}{\scr@@makechapterhead{#1}}% \@namedef{@@makes#1head}{\scr@@makeschapterhead{#1}}% \@namedef{set#1preamble}{\set@preamble{#1}}% } % % \end{macrocode} % \begin{macro}{\scr@dsc@style@chapter@subcommands} % \changes{v3.30}{2020/04/08}{added} % Internal name list of additional commands to be defined for style % \texttt{chapter} commands. This is used, to decide, if a new section command % declaration is really new or already redefines some commands. This should % help to avoid, e.g., defining a new chapter command \cs{schapter}, if % \cs{chapter} is already defines, because \cs{schapter} would redefine the % \cs{@schapter} of \cs{chapter}. % \begin{macrocode} \newcommand*{\scr@dsc@style@chapter@subcommands}[1]{% @#1,@s#1,@make#1head,@makes#1head,@@make#1head,@@makes#1head,set#1preamble% } % \end{macrocode} % \end{macro}^^A \scr@dsc@style@chapter@subcommands % \end{macro}^^A \scr@dsc@def@style@chapter@command % % \begin{macro}{\scr@dsc@style@part@options} % \changes{v3.17}{2015/03/23}{added} % Now the options for style \texttt{part} (very similar to \texttt{chapter}): % \begin{macrocode} \newcommand*{\scr@dsc@style@part@options}{} % \end{macrocode} % \begin{description} % \item[\opt{pagestyle=\meta{name}}:] % The page style, that should be used for the starting page of the chapter % like outline level. % \end{description} % \begin{macrocode} %<*report|book> \DeclareSectionCommandStyleOption{part}{pagestyle}{% \@namedef{\scr@dsc@current pagestyle}{#1}% \FamilyKeyStateProcessed }% % % \end{macrocode} % \begin{description} % \item[\opt{afterindent=\meta{fuzzy}}:] % \changes{v3.26}{2018/09/18}{option \opt{afterindent}} % fuzzy logic. A boolean value states whether to indent the first line % after the heading. With additional \opt{afterindent=bysign} the decision % depends on the sign of \opt{beforeskip}. Negative values of % \opt{beforeskip} result in no paragraph indent. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFuzzyOption{part} {afterindent}{scr@}{@afterindent} {bysign} % \end{macrocode} % \begin{description} % \item[\opt{beforeskip=\meta{length}}:] % The vertical distance before the heading. If \opt{afterindent=bysign}, the % absolute value of \meta{length} is used. Otherwise the \meta{length} can % also be negative to move up the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{part} {beforeskip}{scr@}{@beforeskip} % \end{macrocode} % \begin{description} % \item[\opt{innerskip=\meta{length}}:] % The vertical distance between the prefix line and the text (if a prefix % line is used). % \end{description} % \begin{macrocode} %<*book|report> \DeclareSectionCommandStyleLengthOption{part} {innerskip}{scr@}{@innerskip} % % \end{macrocode} % \begin{description} % \item[\opt{afterskip=\meta{length}}:] % The vertical distance after the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleLengthOption{part} {afterskip}{scr@}{@afterskip} % \end{macrocode} % \begin{description} % \item[\opt{font=\meta{font settings}}:] % The font setting for the font element of the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFontOption{part}{font}{}{} % \end{macrocode} % \begin{description} % \item[\opt{prefixfont=\meta{font settings}}:] % The font setting for the font element of the prefix line of the heading. % \end{description} % \begin{macrocode} \DeclareSectionCommandStyleFontOption{part}{prefixfont}{}{prefix} % \end{macrocode} % \end{macro}^^A \scr@dsc@style@part@options % \begin{macro}{\scr@dsc@def@style@part@command} % \changes{v3.18}{2015/05/23}{added} % Macro % \begin{quote} % \cs{scr@dsc@def@style@part@command}\marg{command name} % \end{quote} % defines a section command \cs{\meta{command name}} of style % \texttt{part}. This looks like a mixture of % \cs{scr@dsc@def@style@section@command} and % \cs{scr@dsc@def@style@chapter@command}. % \begin{description} % \item[ToDo:] Make a more generic (and general) interface for this. % \end{description} % \begin{macrocode} \newcommand*{\scr@dsc@def@style@part@command}[1]{% \@namedef{#1}{\scr@startpart{#1}}% \@namedef{@#1}{\scr@@startpart{#1}}% \@namedef{@s#1}{\scr@@startspart{#1}}% % \@namedef{@end#1}{\scr@@endpart{#1}}% % \@namedef{set#1preamble}{\set@preamble{#1}}% } % \end{macrocode} % \begin{macro}{\scr@dsc@style@part@subcommands} % \changes{v3.30}{2020/04/08}{added} % Internal name list of additional commands to be defined for style % \texttt{part} commands. % \begin{macrocode} \newcommand*{\scr@dsc@style@part@subcommands}[1]{% @#1,@s#1,@end#1,set#1preamble% } % \end{macrocode} % \end{macro}^^A \scr@dsc@style@part@subcommands % \end{macro}^^A \scr@dsc@def@style@part@command % % \begin{macro}{\scr@dsc@style@section@neededoptionstest} % \changes{v3.17}{2015/03/24}{added} % \changes{v3.24}{2017/04/25}{initial values of \opt{indent} and % \opt{font}} % \changes{v3.26}{2018/09/18}{supporting \opt{runin} and \opt{afterindent}} % This macro checks, that all attributes needed for the definition of a % section command (with style \texttt{section}) are properly setup. If not, an % error is reported and the definition is prevented (using % \cs{aftergroup}\cs{@gobbletwo} inside \cs{scr@declaresectioncommanderror}). % \begin{macrocode} \newcommand*{\scr@dsc@style@section@neededoptionstest}{% \scr@ifundefinedorrelax{scr@\scr@dsc@current @sectionindent}{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {section indent}{indent}{0pt}% {\@namedef{scr@\scr@dsc@current @sectionindent}{0pt}}% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @beforeskip}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {before section skip}{beforeskip}% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @afterskip}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {after section skip}{afterskip}% }{}% \IfExistskomafont{\scr@dsc@current}{}{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {font}{font}{\normalsize}% {\newkomafont{\scr@dsc@current}{\normalsize}}% }% \scr@ifundefinedorrelax{scr@\scr@dsc@current @runin}{% \l@addto@macro\local@endgroup{% \ClassInfo{\KOMAClassName} {using compatibility default `runin=bysign'\MessageBreak for `\expandafter\string\csname \scr@dsc@current\endcsname}% \expandafter\gdef\csname scr@\scr@dsc@current @runin\endcsname ##1##2##3{##3}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @afterindent}{% \l@addto@macro\local@endgroup{% \ClassInfo{\KOMAClassName} {using compatibility default `afterindent=bysign'\MessageBreak for `\expandafter\string\csname \scr@dsc@current\endcsname}% \expandafter\gdef\csname scr@\scr@dsc@current @afterindent\endcsname ##1##2##3{##3}% }% }{}% } % \end{macrocode} % \end{macro}^^A \scr@dsc@style@section@neededoptionstest % % \begin{macro}{\scr@dsc@style@chapter@neededoptionstest} % \changes{v3.17}{2015/03/24}{added} % \changes{v3.24}{2017/04/25}{initial values for all but level % \texttt{chapter}} % \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} % This macro checks, that all attributes needed for the definition of a % chapter command (with style \texttt{chapter}) are properly setup. If not, an % error is reported and the definition is prevented (using % \cs{aftergroup}\cs{@gobbletwo} inside \cs{scr@declaresectioncommanderror}). % \begin{macrocode} %<*book|report> \newcommand*{\scr@dsc@style@chapter@neededoptionstest}{% \scr@ifundefinedorrelax{\scr@dsc@current pagestyle}{% \Ifstr{\scr@dsc@current}{chapter}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {initial page style}{pagestyle}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {initial page style}{pagestyle}% {\chapterpagestyle}% {\@namedef{\scr@dsc@current pagestyle}{\chapterpagestyle}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @innerskip}{% \Ifstr{\scr@dsc@current}{chapter}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {inner chapter skip}{innerskip}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {inner chapter skip}{innerskip}% {\scr@chapter@innerskip}% {\@namedef{scr@\scr@dsc@current @innerskip}{\scr@chapter@innerskip}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @beforeskip}{% \Ifstr{\scr@dsc@current}{chapter}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {before chapter skip}{beforeskip}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {before chapter skip}{beforeskip}% {\scr@chapter@beforeskip}% {\@namedef{scr@\scr@dsc@current @beforeskip}{\scr@chapter@beforeskip}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @afterskip}{% \Ifstr{\scr@dsc@current}{chapter}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {after chaper skip}{afterskip}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {after chaper skip}{afterskip}% {\scr@chapter@afterskip}% {\@namedef{scr@\scr@dsc@current @afterskip}{\scr@chapter@afterskip}}% }% }{}% \IfExistskomafont{\scr@dsc@current}{}{% \Ifstr{\scr@dsc@current}{chapter}{% \scr@declaresectioncommanderror{\scr@dsc@current}{font}{font}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {font}{font}% {\usekomafont{chapter}}% {\newkomafont{\scr@dsc@current}{\usekomafont{chapter}}}% }% }% \IfExistskomafont{\scr@dsc@current prefix}{}{% \Ifstr{\scr@dsc@current}{chapter}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {prefix line font}{prefixfont}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {prefix line font}{prefixfont}% {\usekomafont{chapterprefix}}% {\newkomafont{\scr@dsc@current prefix}{\usekomafont{chapterprefix}}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @afterindent}{% \l@addto@macro\local@endgroup{% \ClassInfo{\KOMAClassName} {using compatibility default `afterindent=bysign'\MessageBreak for `\expandafter\string\csname \scr@dsc@current\endcsname}% \expandafter\gdef\csname scr@\scr@dsc@current @afterindent\endcsname ##1##2##3{##3}% }% }{}% } % % \end{macrocode} % \end{macro}^^A \scr@dsc@style@chapter@neededoptionstest % % \begin{macro}{\scr@dsc@style@part@neededoptionstest} % \changes{v3.17}{2015/03/24}{added} % \changes{v3.24}{2017/04/25}{initial values for all but level \texttt{part}} % \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} % This macro checks, that all attributes needed for the definition of a % part command (with style \texttt{part}) are properly setup. If not, an % error is reported and the definition is prevented (using % \cs{aftergroup}\cs{@gobbletwo} inside \cs{scr@declaresectioncommanderror}). % \begin{macrocode} \newcommand*{\scr@dsc@style@part@neededoptionstest}{% %<*book|report> \scr@ifundefinedorrelax{\scr@dsc@current pagestyle}{% \Ifstr{\scr@dsc@current}{part}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {initial page style}{pagestyle}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {initial page style}{pagestyle}% {\partpagestyle}% {\@namedef{\scr@dsc@current pagestyle}{\partpagestyle}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @innerskip}{% \Ifstr{\scr@dsc@current}{part}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {inner part skip}{innerskip}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {inner part skip}{innerskip}% {\scr@part@innerskip}% {\@namedef{scr@\scr@dsc@current @innerskip}{\scr@part@innerskip}}% }% }{}% % \scr@ifundefinedorrelax{scr@\scr@dsc@current @beforeskip}{% \Ifstr{\scr@dsc@current}{part}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {before part skip}{beforeskip}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {before part skip}{beforeskip}% {\scr@part@beforeskip}% {\@namedef{scr@\scr@dsc@current @beforeskip}{\scr@part@beforeskip}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @afterskip}{% \Ifstr{\scr@dsc@current}{part}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {after part skip}{afterskip}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {after part skip}{afterskip}% {\scr@part@afterskip}% {\@namedef{scr@\scr@dsc@current @afterskip}{\scr@part@afterskip}}% }% }{}% \IfExistskomafont{\scr@dsc@current}{}{% \Ifstr{\scr@dsc@current}{part}{% \scr@declaresectioncommanderror{\scr@dsc@current}{font}{font}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}{font}{font}% {\usekomafont{part}}% {\newkomafont{\scr@dsc@current}{\usekomafont{part}}}% }% }{}% \IfExistskomafont{\scr@dsc@current prefix}{}{% \Ifstr{\scr@dsc@current}{part}{% \scr@declaresectioncommanderror{\scr@dsc@current}% {number font}{prefixfont}% }{% \scr@declaresectioncommandwarning{\scr@dsc@current}% {number font}{prefixfont}% {\usekomafont{partprefix}}% {\newkomafont{\scr@dsc@current prefix}{\usekomafont{partprefix}}}% }% }{}% \scr@ifundefinedorrelax{scr@\scr@dsc@current @afterindent}{% \l@addto@macro\local@endgroup{% \ClassInfo{\KOMAClassName}{% using compatibility default %

`afterindent=false'\MessageBreak % `afterindent=true'\MessageBreak for `\expandafter\string\csname \scr@dsc@current\endcsname}% \expandafter\gdef\csname scr@\scr@dsc@current @afterindent\endcsname ##1##2##3% %

{##2}% % {##1}% }% }{}% } % \end{macrocode} % \end{macro}^^A \scr@dsc@style@part@neededoptionstest % % \begin{macro}{\scr@dsc@parametersonlytrue,\scr@dsc@parametersonlyfalse, % \ifscr@dsc@parametersonly} % \changes{v3.17}{2015/03/24}{added} % \changes{v3.20}{2015/11/18}{dummy options removed} % In the first option pass of \cs{DeclareSectionCommand} this is set to true, % if the \opt{style} option is used without value, to change the settings of a % command without running \cs{scr@dsc@def@style@\meta{style}@command} and % therefore without defining the command itself. % \begin{description} % \item[ToDo:] Is this a not documented feature? What's the sense? % \end{description} % \begin{macrocode} \newif\ifscr@dsc@parametersonly % \end{macrocode} % \end{macro}^^A \ifscr@dsc@parametersonly % % \begin{command}{\DeclareSectionCommand} % \changes{v3.15}{2014/11/21}{added} % \changes{v3.17}{2015/03/23}{re-implemented because of style depending % options} % \changes{v3.18}{2015/05/22}{\cs{scr@dsc@def@style@\dots @command} % defines style depending macros} % \changes{v3.20}{2015/10/03}{using \cs{DeclareTOCStyleEntry}} % The main command to define new section commands or redefine existing section % commands. Incidentally it also defines the corresponding ToC entry command. % \begin{quote} % \cs{DeclareSectionCommand}\oarg{options}\marg{command name} % \end{quote} % is used to define \cs{\meta{command name}}. The \meta{options} are used to % specify the behave of the command. It is declared as optional % argument. However for new commands not all the options are really optional. % \begin{description} % \item[Note:] Don't forget to declare all options, that are defined for % \cs{DeclareSectionCommand} also for \cs{ProvideSectionCommands}! % \end{description} % \begin{macrocode} \newcommand*{\DeclareSectionCommand}[2][]{% \edef\scr@dsc@current{#2}% % \end{macrocode} % The first pass to get the: % \begin{description} % \item[\opt{style=\meta{name}}:] % style of the section command. % \end{description} % \begin{macrocode} \scr@dsc@parametersonlyfalse \DefineFamilyKey[.dsc]{KOMAarg}{style}{% \IfArgIsEmpty{##1}{% \scr@dsc@parametersonlytrue \FamilyKeyStateProcessed }{% \scr@ifundefinedorrelax{scr@dsc@def@style@##1@command}{% \FamilyKeyStateUnknownValue }{% \@namedef{scr@\scr@dsc@current @style}{##1}% \FamilyKeyStateProcessed }% }% }% % \end{macrocode} % \begin{description} % \item[\opt{tocstyle=\meta{name}}:] \changes{v3.20}{2015/11/12}{early % evaluation of option \opt{tocstyle}} \changes{v3.27}{2019/10/02}{prefix % for storing directory style changed} style of the ToC entry. From % \pkg*{tocbasic} 3.27 the style name macro has been changed from % \cs{scr@dte@\meta{level name}@style} to \cs{scr@tso@\meta{level % name}@style}. % \begin{description} % \item[ToDo:] Don't support deprecated \cs{scr@dte@\meta{level name}@style} % any longer. % \end{description} % \end{description} % \begin{macrocode} \DefineFamilyKey[.dsc]{KOMAarg}{tocstyle}{% \IfArgIsEmpty{##1}{% \@ifundefined{scr@dte@\scr@dsc@current @style}{}{% \expandafter\let\csname scr@dte@\scr@dsc@current @style\endcsname \relax }% \expandafter\let\csname scr@tso@\scr@dsc@current @style\endcsname \relax \FamilyKeyStateProcessed }{% % \typeout{TRACE: option tocstyle=##1}% % \typeout{TRACE: command=\scr@dsc@current}% \scr@ifundefinedorrelax{scr@dte@def@l@##1}{% % \typeout{TRACE: style not defined}% \FamilyKeyStateUnknownValue }{% % \typeout{TRACE: style defined}% \@namedef{scr@dte@\scr@dsc@current @style}{##1}% \@namedef{scr@tso@\scr@dsc@current @style}{##1}% \FamilyKeyStateProcessed }% }% }% % \end{macrocode} % \begin{description} % \item[\texttt{@else@=\meta{value}}:] % \changes{v3.20}{2015/11/18}{early evaluation of option \opt{tocstyle}} % All other options are ignored using the \opt{@else@} option, which simply % accepts every option. So the first pass does not report any unknown % options. % \end{description} % \begin{macrocode} \DefineFamilyKey[.dsc]{KOMAarg}{@else@}{% %<*trace> \typeout{TRACE: ignoring option `@else@=\detokenize{##1}'}% \typeout{TRACE: \string\scr@key@atlist=`\detokenize\expandafter{\scr@key@atlist}'}% \typeout{TRACE: \string\scr@key@name=`\detokenize\expandafter{\scr@key@name}'}% \typeout{TRACE: \string\scr@key@value=`\detokenize\expandafter{\scr@key@value}'}% % \FamilyKeyStateProcessed }% \FamilyExecuteOptions[.dsc]{KOMAarg}{#1}% % \end{macrocode} % \changes{v3.20}{2015/11/18}{Resetting options after first pass} % After the first pass we have to reset these options. % \begin{macrocode} \RelaxFamilyKey[.dsc]{KOMAarg}{@else@}% \RelaxFamilyKey[.dsc]{KOMAarg}{tocstyle}% \RelaxFamilyKey[.dsc]{KOMAarg}{style}% \begingroup \scr@ifundefinedorrelax{scr@\scr@dsc@current @style}{% \scr@declaresectioncommanderror{\scr@dsc@current} {section command style}{style}% }{}% \endgroup \@firstofone{% % \end{macrocode} % \changes{v3.20}{2015/11/12}{dummy options for main pass removed} % Now, we know the style and can activate all the options of the style. % \begin{macrocode} % \typeout{TRACE: style=\@nameuse{scr@\scr@dsc@current @style}}% \@nameuse{scr@dsc@style@\@nameuse{scr@\scr@dsc@current @style}@options}% % \end{macrocode} % And initialize the ToC style. % \begin{macrocode} % \typeout{TRACE: tocstyle=% % \@nameuse{scr@tso@\scr@dsc@current @style}}% \scr@ifundefinedorrelax{scr@tso@\scr@dsc@current @style}{% \scr@ifundefinedorrelax{l@\scr@dsc@current}{% \@namedef{scr@tso@\scr@dsc@current @style}{default}% }{}% }{}% % \end{macrocode} % \changes{v3.20}{2016/04/12}{\cs{@ifnextchar} replaced by % \cs{kernel@ifnextchar}} % \changes{v3.21}{2016/06/12}{support for prefix \opt{tocentry} instead of % \opt{toc}} % We also have to define options for all the ToC style options by adding the % prefix \opt{toc} to the names of these options. This also means a ToC style % option \opt{style} must not exist (because we already have an option % \opt{tocstyle}). This is the main reason, \cs{DeclareTOCStyleEntry} has not % such an option but a corresponding argument. Additionally ToC style options % should never start with \opt{toc} (because of the ugly resulting % \opt{toctoc\dots}). % \begin{macrocode} \let\scr@dsc@tocstyle@options\@empty \let\scr@dsc@extra@relax@opts\@empty \scr@ifundefinedorrelax{scr@tso@\scr@dsc@current @style}{% \expandafter\let \csname scr@tso@\scr@dsc@current @style\expandafter\endcsname \csname scr@dte@\scr@dsc@current @style\endcsname }{}% \scr@ifundefinedorrelax{scr@tso@\scr@dsc@current @style}{}{% \begingroup \def\scr@dte@current{#2}% \edef\reserved@a{% \noexpand\@ExecuteTOCEntryStyleInitCode{% \@nameuse{scr@tso@\scr@dsc@current @style}% }{\scr@dsc@current}% }\reserved@a \def\do@endgroup{\endgroup}% \def\do##1{% \l@addto@macro\do@endgroup{% \l@addto@macro\scr@dsc@extra@relax@opts{% \RelaxFamilyKey[.dsc]{KOMAarg}{toc##1}% \RelaxFamilyKey[.dsc]{KOMAarg}{tocentry##1}% }% }% \kernel@ifnextchar[%] {\@dodefault{##1}}% {\@donodefault{##1}}% }% \def\@donodefault##1{% \l@addto@macro\do@endgroup{% \DefineFamilyKey[.dsc]{KOMAarg}{toc##1}{% \l@addto@macro{\scr@dsc@tocstyle@options}{##1={####1},}% \FamilyKeyStateProcessed }% \DefineFamilyKey[.dsc]{KOMAarg}{tocentry##1}{% \l@addto@macro{\scr@dsc@tocstyle@options}{##1={####1},}% \FamilyKeyStateProcessed }% }% }% \def\@dodefault##1[##2]{% \l@addto@macro\do@endgroup{% \DefineFamilyKey[.dsc]{KOMAarg}{toc##1}[##2]{% \l@addto@macro{\scr@dsc@tocstyle@options}{##1={####1},}% \FamilyKeyStateProcessed }% \DefineFamilyKey[.dsc]{KOMAarg}{tocentry##1}[##2]{% \l@addto@macro{\scr@dsc@tocstyle@options}{##1={####1},}% \FamilyKeyStateProcessed }% }% }% \scr@dte@doopts \do@endgroup }% % \end{macrocode} % Make option \opt{style} and \opt{tocstyle} (fast) dummies, because they % already have been handled completely. % \begin{macrocode} \DefineFamilyKey[.dsc]{KOMAarg}{style}{\FamilyKeyStateProcessed}% \DefineFamilyKey[.dsc]{KOMAarg}{tocstyle}{\FamilyKeyStateProcessed}% % \end{macrocode} % Some options exist for all section command styles and therefore are defined % here and not a part of the style options: % \begin{description} % \item[\opt{expandtopt=\meta{boolean}}:] % If \texttt{true} all lengths are expanded at setting time to unit pt % instead of used unchanged. With this, the lengths are not depending on the % font size of usage time but on the current font size. % \end{description} % \begin{macrocode} \FamilyBoolKey[.dsc]{KOMAarg}{expandtopt}{scr@dsc@expandtopt}% \scr@dsc@expandtoptfalse % \end{macrocode} % \begin{description} % \item[\opt{increaselevel=\meta{number}}:] % Automatically increase \opt{level} by \meta{number} (with default 1). This % is needed for \cs{DeclareSectionCommands} and therefore only defined if % \cs{scr@local@levelincrease} is defined. % \end{description} % \begin{macrocode} \scr@ifundefinedorrelax{scr@local@levelincrease}{% \RelaxFamilyKey[.dsc]{KOMAarg}{increaselevel}% }{% \FamilyCounterMacroKey[.dsc]{KOMAarg}{increaselevel}[1]% {\scr@local@levelincrease}% }% % \end{macrocode} % \begin{description} % \item[\opt{level=\meta{number}}:] % The numerical outline level of the command. % \end{description} % \begin{macrocode} \scr@ifundefinedorrelax{scr@local@leveloffset}{% \edef\reserved@a{% \noexpand\FamilyCounterMacroKey[.dsc]{KOMAarg}{level}{% \expandafter\noexpand\csname \scr@dsc@current numdepth\endcsname}% }\reserved@a }{% \edef\reserved@a{% \noexpand\DefineFamilyKey[.dsc]{KOMAarg}{level}{% \noexpand\FamilySetCounterMacro{KOMAarg}{level}{% \expandafter\noexpand\csname \scr@dsc@current numdepth\endcsname }% \unexpanded{% {\numexpr ##1+\scr@local@leveloffset\relax}% \edef\scr@local@leveloffset{% \the\numexpr\scr@local@leveloffset+\scr@local@levelincrease\relax }% }% }% }\reserved@a }% % \end{macrocode} % \begin{description} % \item[\opt{counterwithout=\meta{name}}:] % \changes{v3.19}{2015/09/09}{option \opt{counterwithout}} % The counter of this command should not depend on the counter % \cnt{name} any longer. % \end{description} % \begin{macrocode} \FamilyStringKey[.dsc]{KOMAarg}{counterwithout}{\scr@local@counterwithout}% \let\scr@local@counterwithout\relax % \end{macrocode} % \begin{description} % \item[\opt{counterwithin=\meta{name}}:] % The counter of this command depends on the counter \cnt{name}. % \end{description} % \begin{macrocode} \FamilyStringKey[.dsc]{KOMAarg}{counterwithin}{\scr@local@counterwithin}% \let\scr@local@counterwithin\relax % \end{macrocode} % \begin{description} % \item[\opt{toclevel=\meta{number}}:] % The numerical ToC entry level. Default is \opt{level}. This option exists % only, if the ToC style supports it. But because with % \cs{DeclareSectionCommands} we need an offset for this (similar to the % increase of \opt{level}). So we have to redefine it in case of existing % \cs{scr@local@tocleveloffset}. % \end{description} % \begin{macrocode} \scr@ifundefinedorrelax{scr@local@tocleveloffset}{}{% \scr@ifundefinedorrelax{KV@KOMAarg.dsc@toclevel}{% }{% \DefineFamilyKey[.dsc]{KOMAarg}{toclevel}{% \edef\reserved@a{% \noexpand\l@addto@macro{\noexpand\scr@dsc@tocstyle@options}{% level=\the\numexpr ##1+\scr@local@tocleveloffset\relax,% }% }\reserved@a \edef\scr@local@tocleveloffset{% \the\numexpr\scr@local@tocleveloffset+\scr@local@levelincrease\relax }% \FamilyKeyStateProcessed }% }% }% % \end{macrocode} % \changes{v3.20}{2015/11/12}{only temporary definition of options} % The main pass of options execution. Afterwards reset all the options. % \begin{macrocode} \FamilyExecuteOptions[.dsc]{KOMAarg}{#1}% \scr@dsc@extra@relax@opts \let\scr@dsc@extra@relax@opts\relax \RelaxSectionCommandOptions \RelaxFamilyKey[.dsc]{KOMAarg}{style}% \RelaxFamilyKey[.dsc]{KOMAarg}{tocstyle}% \RelaxFamilyKey[.dsc]{KOMAarg}{expandtopt}% \scr@ifundefinedorrelax{scr@local@levelincrease}{}{% \RelaxFamilyKey[.dsc]{KOMAarg}{increaselevel}% }% \RelaxFamilyKey[.dsc]{KOMAarg}{level}% \RelaxFamilyKey[.dsc]{KOMAarg}{counterwithin}% % \end{macrocode} % Now, we can test, if all needed options has been defined. % \changes{v3.27}{2019/02/07}{\opt{level} must no be -\cs{maxdimen}} % Also test, that \opt{level} is not -\len{maxdimen}, because this value is % used internally to switch of numbering locally. % \begin{macrocode} \begingroup \def\local@endgroup{\endgroup}% \scr@ifundefinedorrelax{\scr@dsc@current numdepth}{% \scr@declaresectioncommanderror{\scr@dsc@current}{section level}{level}% }{% \expandafter\ifnum \csname #2numdepth\endcsname>-\maxdimen \@nameuse{scr@dsc@style@% \@nameuse{scr@\scr@dsc@current @style}% @neededoptionstest}% \else \ClassError{\KOMAClassName}{% `level' must be > -\the\numexpr\maxdimen\relax }{% KOMA-Script internally sets `secnumdepth' to -\the\numexpr\maxdimen\relax\space to locally switch of\MessageBreak the numbering, i.e., inside running heads.\MessageBreak Because of this, you can define section commands with\MessageBreak `level' greater than -\the\numexpr\maxdimen\relax\space only.% }% \let\local@endgroup\endgroup \aftergroup\@gobbletwo \fi }% \local@endgroup % \end{macrocode} % If the configuration is compete, we are ready for the (re-)definition of the % command. % \begin{macrocode} \@firstofone{% % \end{macrocode} % \changes{v3.20}{2015/10/15}{missing \cs{expandafter} added} % First of all we need a counter: % \begin{macrocode} \@ifundefined{c@#2}{\newcounter{#2}}{}% \ifx\scr@local@counterwithout\relax \else\ifx\scr@local@counterwithout\@empty \else \@removefromreset{#2}{\scr@local@counterwithout}% \fi \@namedef{the#2}{\arabic{#2}}% \fi \ifx\scr@local@counterwithin\relax \else\ifx\scr@local@counterwithin\@empty \@namedef{the#2}{\arabic{#2}}% \else \@removefromreset{#2}{\scr@local@counterwithin}% \@addtoreset{#2}{\scr@local@counterwithin}% \expandafter\def\csname the#2\expandafter\endcsname\expandafter{% \csname the\scr@local@counterwithin\endcsname.\arabic{#2}}% \fi \fi \@ifundefined{#2format}{% \@namedef{#2format}{\csname the#2\endcsname\autodot\enskip}% }{}% % \end{macrocode} % Then the command itself (but only, if the \opt{style} was not empty): % \begin{macrocode} \ifscr@dsc@parametersonly \ClassInfo{\KOMAClassName}{% not defining `\expandafter\string\csname #2\endcsname' due to\MessageBreak empty section style option% }% \else \scr@ifundefinedorrelax{% scr@dsc@def@style@\@nameuse{scr@#2@style}@command% }{% \ClassWarning{\KOMAClassName}{% not defining `\expandafter\string\csname #2\endcsname' due\MessageBreak to not yet defined section style\MessageBreak `\@nameuse{scr@#2@style}'% }% }{% \@nameuse{scr@dsc@def@style@\@nameuse{scr@#2@style}@command}{#2}% }% \fi % \end{macrocode} % We also need commands for the running head and a corresponding number % formatting. With \pkg*{scrlayer} this can and should be done using % \cs{DeclareSectionNumberDepth}. Otherwise we do it step by step. % \changes{v3.15a}{2015/01/21}{\cs{endskip} instead of \cs{enskip}} % \begin{macrocode} \@ifundefined{DeclareSectionNumberDepth}{% \@ifundefined{#2markformat}{% \@namedef{#2markformat}{\csname the#2\endcsname\autodot\enskip}% }{}% \@ifundefined{#2mark}{% \expandafter\let\csname #2mark\endcsname\@gobble }{}% }{% \DeclareSectionNumberDepth{#2}{\csname #2numdepth\endcsname}% }% % \end{macrocode} % We also need macros to generate and print the ToC entry. % \begin{macrocode} \expandafter\providecommand\expandafter*% \csname add#2tocentry\endcsname[2]{% \addtocentrydefault{#2}{##1}{##2}% }% \scr@ifundefinedorrelax{scr@tso@#2@style}{% \expandafter\let\csname scr@tso@#2@style\expandafter\endcsname \csname scr@dte@#2@style\endcsname }{}% \scr@ifundefinedorrelax{scr@tso@#2@style}{% }{% \DeclareTOCStyleEntry[\scr@dsc@tocstyle@options]{% \@nameuse{scr@tso@#2@style}% }{#2}% }% \scr@ifundefinedorrelax{l@#2}{% \DeclareTOCStyleEntry[\scr@dsc@tocstyle@options]{default}{#2}% }{}% % \end{macrocode} % \changes{v3.20}{2015/0/07}{support for ToC levels with \pkg{hyperref}} % \changes{v3.26}{2018/06/27}{overwrite ToC levels of \pkg{hyperref}} % \changes{v3.26}{2018/06/27}{fallback handling of gaps in the bookmark % levels} % And we need extra code for \pkg{hyperref} and the bookmarks. % \begin{macrocode} \if@atdocument \let\reserved@a\@firstofone \else \@ifpackageloaded{hyperref}{% \let\reserved@a\@firstofone }{% \def\reserved@a##1{% \AfterAtEndOfPackage{hyperref}{\AtBeginDocument{##1}}% }% }% \fi \reserved@a{% \expandafter\let\csname toclevel@#2\expandafter\endcsname \csname #2tocdepth\endcsname \scr@ifundefinedorrelax{bookmarksetup}{% \scr@ifundefinedorrelax{scr@min@toclevel}{% \expandafter\let\expandafter\scr@min@toclevel \csname toclevel@#2\endcsname }{% \expandafter\ifnum \csname toclevel@#2\endcsname < \numexpr \scr@min@toclevel-1\relax \ClassWarning{\KOMAClassName}{% Trying emergency fix for bookmark level gap,\MessageBreak because toclevel of `#2' (\csname toclevel@#2\endcsname)\MessageBreak is more than 1 lower than currently lowest\MessageBreak known level (\scr@min@toclevel).\MessageBreak Note: This fix can fail and you should load\MessageBreak package `bookmark' to avoid usage of this\MessageBreak fix% }% \expandafter\edef\csname toclevel@#2\endcsname{% \the\numexpr \scr@min@toclevel-1\relax }% \fi \expandafter\ifnum \csname toclevel@#2\endcsname < \scr@min@toclevel\relax \expandafter\let\expandafter\scr@min@toclevel \csname toclevel@#2\endcsname \fi }% \scr@ifundefinedorrelax{scr@max@toclevel}{% \expandafter\let\expandafter\scr@max@toclevel \csname toclevel@#2\endcsname }{% \expandafter\ifnum \csname toclevel@#2\endcsname > \numexpr \scr@max@toclevel+1\relax \ClassWarning{\KOMAClassName}{% Trying emergency fix for bookmark level gap,\MessageBreak because toclevel of `#2' (\csname toclevel@#2\endcsname)\MessageBreak is more than 1 greater than currently highest\MessageBreak known level (\scr@max@toclevel).\MessageBreak Note: This fix can fail and you should load\MessageBreak package `bookmark' to avoid usage of this\MessageBreak fix% }% \expandafter\edef\csname toclevel@#2\endcsname{% \the\numexpr \scr@max@toclevel+1\relax }% \fi \expandafter\ifnum \csname toclevel@#2\endcsname > \scr@max@toclevel\relax \expandafter\let\expandafter\scr@max@toclevel \csname toclevel@#2\endcsname \fi }% }{}% }% }% }% \let\scr@dsc@current\relax } % \end{macrocode} % \begin{macro}{\scr@declaresectioncommanderror} % \changes{v3.15}{2014/11/21}{added} % It there were not enough options to \cs{DeclareSectionCommand} to define the % command, we report an error and also execute % \cs{aftergroup}\cs{@gobbletwo}. So the |\@firstofone{…}| code after % |\endgroup| resp. |\local@endgroup| inside \cs{DeclareSectionCommand} that % defines the new section command etc. will never be used in such a case. % \begin{macrocode} \newcommand*{\scr@declaresectioncommanderror}[3]{% \ClassError{\KOMAClassName}{% #2 of \expandafter\string\csname #1\endcsname\space unknown% }{% Please use option `#3' to declare the #2.\MessageBreak If you'll continue, declaration will be ignored% }% \let\local@endgroup\endgroup \aftergroup\@gobbletwo } % \end{macrocode} % \end{macro}^^A \scr@declaresectioncommanderror % \begin{macro}{\scr@declaresectioncommandwarning} % \changes{v3.24}{2017/04/25}{added} % Sometimes a warning and extension of \cs{local@endgroup} is enough. % \begin{macrocode} \newcommand*{\scr@declaresectioncommandwarning}[5]{% \ClassInfo{\KOMAClassName}{% #2 of \expandafter\string\csname #1\endcsname\space unknown.\MessageBreak You should use option `#3' if you\MessageBreak do not want to use the default value\MessageBreak `\detokenize{#4}'% }% \l@addto@macro\local@endgroup{#5}% } % \end{macrocode} % \end{macro}^^A \scr@declaresectioncommandwarning % \end{command}^^A \DeclareSectionCommand % % % \begin{command}{\DeclareNewSectionCommand} % \changes{v3.15}{2014/11/21}{added} % \changes{v3.25}{2018/03/10}{additional tests and errors about % \cs{the\dots}, \cs{\dots mark}, \cs{\dots format}, % \cs{\dots markformat}} % \changes{v3.30}{2020/04/08}{orphan spaces removed} % This is similar to \cs{DeclareSectionCommand} but reports an error, if the % command or a main helper already exist. So it can be used for new commands % only. % \begin{macrocode} \newcommand*{\DeclareNewSectionCommand}[2][]{% \@ifundefined{#2}{% \@tempswatrue \let\reserved@b\@empty \@for \reserved@a:=the#2,#2mark,#2format,#2markformat\do{% \expandafter\scr@ifundefinedorrelax\expandafter{\reserved@a}{}{% \@tempswafalse \edef\reserved@b{\expandafter\string\csname \reserved@a\endcsname}% }% }% \if@tempswa % \end{macrocode} % \changes{v3.30}{2020/04/08}{extended test for really new} % After the general user commands, we just have to detect the style \dots % \begin{macrocode} \expandafter\let\expandafter\scr@dsc@current \csname scr@tso@##2@style\endcsname \DefineFamilyKey[.dsc]{KOMAarg}{style}{% \edef\scr@dsc@current{##1}% \FamilyKeyStateProcessed }% \DefineFamilyKey[.dsc]{KOMAarg}{@else@}{\FamilyKeyStateProcessed}% \FamilyExecuteOptions[.dsc]{KOMAarg}{#1}% \RelaxFamilyKey[.dsc]{KOMAarg}{@else@}% \RelaxFamilyKey[.dsc]{KOMAarg}{style}% \@tempswatrue % \end{macrocode} % \dots{} to gut through the \cs{scr@dsc@style@\meta{style}@subcommands} and % test, if one of them exists. % \begin{macrocode} \@ifundefined{scr@dsc@current}{}{% \scr@ifundefinedorrelax{scr@dsc@style@\scr@dsc@current @subcommands}{% }{% \edef\reserved@b{% \csname scr@dsc@style@\scr@dsc@current @subcommands\endcsname{#2}% }% \expandafter\@for\expandafter\reserved@a\expandafter:\expandafter=% \reserved@b\do{% \expandafter\scr@ifundefinedorrelax\expandafter{\reserved@a}{}{% \@tempswafalse \edef\reserved@b{% \expandafter\string\csname \reserved@a\endcsname}% }% }% } }% \let\scr@dsc@current\relax \fi \if@tempswa % \end{macrocode} % If not, we can use \cs{DeclareSectionCommand}. Otherwise just report an % error. % \begin{macrocode} \DeclareSectionCommand[{#1}]{#2}% \else \ClassError{\KOMAClassName}{% command `\reserved@b' already defined% }{% You've tried to define the section command `\expandafter\string\csname #2\endcsname' newly.\MessageBreak Such a section command needs an additional new command `\reserved@b',\MessageBreak but this already exists. So you cannot define `\expandafter\string\csname #2\endcsname' newly.\MessageBreak Maybe you should use one of \string\DeclareSectionCommand, \string\RedeclareSectionCommand,\MessageBreak or \string\ProvideSectionCommand.\MessageBreak If you'll continue, the command will be ignored.% }% \fi }{% \ClassError{\KOMAClassName}{% command `\expandafter\string\csname #2\endcsname' already defined% }{% You've tried to define the section command `\expandafter\string\csname #2\endcsname' newly,\MessageBreak but a command or something else with this name already exists.\MessageBreak Maybe you should use one of \string\DeclareSectionCommand, \string\RedeclareSectionCommand,\MessageBreak or \string\ProvideSectionCommand.\MessageBreak If you'll continue, the command will be ignored.% }% }% } % \end{macrocode} % \end{command}^^A \DeclareNewSectionCommand % % \begin{command}{\RedeclareSectionCommand} % \changes{v3.15}{2014/11/21}{added} % This is much easier than \cs{DeclareNewSectionCommand} because it tests only % for the main command and uses \cs{DeclareSectionCommand} if the main command % already exists. So all the additional commands and main helpers do not need % to exist. % \begin{macrocode} \newcommand*{\RedeclareSectionCommand}[2][]{% \@ifundefined{#2}{% \ClassError{\KOMAClassName}{% command `\expandafter\string\csname #2\endcsname' not defined% }{% You've tried to re-define the section command `\expandafter\string\csname #2\endcsname',\MessageBreak but a command with this name does not exists.\MessageBreak Maybe you should use one of \string\DeclareSectionCommand, \string\DeclareNewSectionCommand,\MessageBreak or \string\ProvideSectionCommand.\MessageBreak If you'll continue, the command will be irgnored.% }% }{% \DeclareSectionCommand[{#1}]{#2}% }% } % \end{macrocode} % \end{command}^^A \RedeclareSectionCommand % % \begin{command}{\ProvideSectionCommand} % \changes{v3.15}{2014/11/21}{added} % This is much easier than \cs{DeclareNewSectionCommand} because currently it % tests only for the command itself but nor for the helpers. % \begin{description} % \item[ToDo:] This is dangerous, because % e.g. |\ProvideSectionCommand{schapter}| would break \cs{chapter} (because % of \cs{@schapter}). So maybe it should do the same tests as % \cs{DeclareNewSectionCommand} and at least warn. % \end{description} % Basierend auf |\DeclareSectionCommand| wird eine Gliederungsanweisung % definiert, wenn sie zuvor noch nicht existierte. Wichtig zu bemerken ist, % dass die ganzen Hilfsanweisungen bereits existieren dürfen. % \begin{macrocode} \newcommand*{\ProvideSectionCommand}[2][]{% \@ifundefined{#2}{% \DeclareSectionCommand[{#1}]{#2}% }{% \ClassInfo{\KOMAClassName}{% \string\ProvideSectionCommand{#1} ignored% }% }% } % \end{macrocode} % \end{command}^^A \ProvideSectionCommand % % \begin{command}{\DeclareSectionCommands} % \changes{v3.15}{2014/12/03}{added} % \changes{v3.26}{2018/08/29}{using \cs{scr@trim@spaces}} % Based on \cs{DeclareSectionCommand} this one can be used to define several % commands at once. The commands are given as a comma-separated list of % commands. There is one additional option \opt{increaselevel=\meta{number}} % to add \meta{number} to the \opt{level} at each call of % \cs{DeclareSectionCommand} but the first one. The definition of this option % is done inside \cs{DeclareSectionCommand} if \cs{scr@local@levelincrease} is % defined. Because of the first run, we initialize it with 0. The same has to % be done for \cs{scr@local@leveloffset} and \cs{scr@local@tocleveloffset}. % At the end we also have to un-define these local commands. Otherwise later % usage of \cs{DeclareSectionCommand} would be detected as part of % \cs{DeclareSectionCommands}. % \begin{macrocode} \newcommand*{\DeclareSectionCommands}[2][]{% \edef\reserved@a{#2}% \def\scr@local@levelincrease{\z@}% \def\scr@local@leveloffset{\z@}% \def\scr@local@tocleveloffset{\z@}% \@for\reserved@a:=\reserved@a\do{% \scr@trim@spaces\reserved@a \edef\reserved@a{% \unexpanded{\DeclareSectionCommand[{#1}]}{\reserved@a}% }% \reserved@a }% \let\scr@local@levelincrease\relax \let\scr@local@leveloffset\relax \let\scr@local@tocleveloffset\relax } % \end{macrocode} % \end{command}^^A \DeclareSectionCommands % % \begin{command}{\DeclareNewSectionCommands} % \changes{v3.15}{2014/12/03}{added} % \changes{v3.26}{2018/08/29}{using \cs{scr@trim@spaces}} % Because of \opt{increaselevel} we cannot simply use % \cs{DeclareNewSectionCommand} inside, but have to use % \cs{DeclareSectionCommand} even for already defined commands (but % nevertheless report an error). % \begin{description} % \item[ToDo:] Is this really the correct error action? Does it really matter, % if \opt{increaselevel} would be wrong after already reporting an error? % \end{description} % \begin{macrocode} \newcommand*{\DeclareNewSectionCommands}[2][]{% \edef\reserved@a{#2}% \def\scr@local@levelincrease{\z@}% \def\scr@local@leveloffset{\z@}% \def\scr@local@tocleveloffset{\z@}% \@for\reserved@a:=\reserved@a\do{% \scr@trim@spaces\reserved@a \@ifundefined{\reserved@a}{}{% \ClassError{\KOMAClassName}{% command `\expandafter\string\csname\reserved@a\endcsname' already defined% }{% You've tried to define the section command `\expandafter\string\csname\reserved@a\endcsname' newly,\MessageBreak but a command, token, box or length with this name already exists.\MessageBreak Maybe you should use one of \string\DeclareSectionCommand, \string\RedeclareSectionCommand,\MessageBreak or \string\ProvideSectionCommand.\MessageBreak Nevertheless, if you'll continue, the command will be defined.% }% }% \edef\reserved@a{% \unexpanded{\DeclareSectionCommand[{#1}]}{\reserved@a}% }% \reserved@a }% \let\scr@local@levelincrease\relax \let\scr@local@leveloffset\relax \let\scr@local@tocleveloffset\relax } % \end{macrocode} % \end{command}^^A \DeclareNewSectionCommands % % \begin{command}{\RedeclareSectionCommands} % \changes{v3.15}{2014/12/03}{added} % \changes{v3.26}{2018/08/29}{using \cs{scr@trim@spaces}} % Because of \opt{increaselevel} we cannot simply use % \cs{RedeclareSectionCommand} inside, but have to use % \cs{DeclareSectionCommand} even for not yet defined commands (but % nevertheless report an error). % \begin{description} % \item[ToDo:] Is this really the correct error action? Does it really matter, % if \opt{increaselevel} would be wrong after already reporting an error? % \end{description} % \begin{macrocode} \newcommand*{\RedeclareSectionCommands}[2][]{% \edef\reserved@a{#2}% \def\scr@local@levelincrease{\z@}% \def\scr@local@leveloffset{\z@}% \def\scr@local@tocleveloffset{\z@}% \@for\reserved@a:=\reserved@a\do{% \scr@trim@spaces\reserved@a \@ifundefined{\reserved@a}{% \ClassError{\KOMAClassName}{% command `\expandafter\string\csname\reserved@a\endcsname' not defined% }{% You've tried to re-define the section command `\expandafter\string\csname\reserved@a\endcsname',\MessageBreak but a command with this name does not exists.\MessageBreak Maybe you should use one of \string\DeclareSectionCommand, \string\DeclareNewSectionCommand,\MessageBreak or \string\ProvideSectionCommand.\MessageBreak Nevertheless, if you'll continue, the command will be defined.% }% }{}% \edef\reserved@a{% \unexpanded{\DeclareSectionCommand[{#1}]}{\reserved@a}% }% \reserved@a }% \let\scr@local@levelincrease\relax \let\scr@local@leveloffset\relax \let\scr@local@tocleveloffset\relax } % \end{macrocode} % \end{command}^^A \RedeclareSectionCommands % % \begin{command}{\ProvideSectionCommands} % \changes{v3.15}{2014/12/03}{added} % \changes{v3.17}{2015/03/23}{re-implemented because of style depending % options} % \changes{v3.26}{2018/08/29}{using \cs{scr@trim@spaces}} % This is the real problematic case, because \opt{increaselevel} should be % used even for commands, that must not be defined. However, maybe a solution % like this should be used for the two previous commands too. % \begin{macrocode} \newcommand*{\ProvideSectionCommands}[2][]{% \edef\reserved@a{#2}% \def\scr@local@levelincrease{\z@}% \def\scr@local@leveloffset{\z@}% \def\scr@local@tocleveloffset{\z@}% \@for\reserved@a:=\reserved@a\do{% \scr@trim@spaces\reserved@a \@ifundefined{\reserved@a}{% \edef\reserved@a{% \unexpanded{\DeclareSectionCommand[{#1}]}{\reserved@a}% }% \reserved@a }{% % \end{macrocode} % If the command already exists, process options \opt{level}, \opt{toclevel} % and \opt{increaselevel} and ignore all others using an \opt{@else@} option. % \begin{macrocode} \DefineFamilyKey[.dsc]{KOMAarg}{@else@}{\FamilyKeyStateProcessed}% \FamilyCounterMacroKey[.dsc]{KOMAarg}{increaselevel}[1]% {\scr@local@levelincrease}% \DefineFamilyKey[.dsc]{KOMAarg}{level}{% \FamilySetCounterMacro{KOMAarg}{level}{\reserved@b}{##1}% \edef\scr@local@leveloffset{% \the\numexpr\scr@local@leveloffset+\scr@local@levelincrease\relax }% }% \DefineFamilyKey[.dsc]{KOMAarg}{toclevel}{% \FamilySetCounterMacro{KOMAarg}{toclevel}{\reserved@b}{##1}% \edef\scr@local@tocleveloffset{% \the\numexpr\scr@local@tocleveloffset+\scr@local@levelincrease\relax }% }% \FamilyExecuteOptions[.dsc]{KOMAarg}{#1}% \RelaxFamilyKey[.dsc]{KOMAarg}{toclevel}% \RelaxFamilyKey[.dsc]{KOMAarg}{level}% \RelaxFamilyKey[.dsc]{KOMAarg}{increaselevel}% \RelaxFamilyKey[.dsc]{KOMAarg}{@else@}% }% }% \let\scr@local@levelincrease\relax \let\scr@local@leveloffset\relax \let\scr@local@tocleveloffset\relax } % % \end{macrocode} % \end{command}^^A \ProvideSectionCommands % % \begin{command}{\IfSectionCommandStyleIs} % \changes{v3.27}{2019/02/04}{added} % Test whether ot not the section command of argument 1 has the style of % argument 2. If so: use argument 3, of not: use argument 4. % \begin{macrocode} %<*body> \newcommand*{\IfSectionCommandStyleIs}[2]{% \scr@ifundefinedorrelax{#1}{% \ClassError{\KOMAClassName}{% \expandafter\string\csname #1\endcsname\space not defined}{% You cannot compare the section command style of an undefined command.}% }{% \scr@ifundefinedorrelax{scr@#1@style}{% \ClassError{\KOMAClassName}{% \expandafter\string\csname #1\endcsname\space not a valid section command% }{% You cannot detect the section command style of a command, that has\MessageBreak never been defined as a section command by KOMA-Script.% }% }% }% \scr@ifundefinedorrelax{scr@dsc@def@style@#2@command}{% \ClassError{\KOMAClassName}{% unknown section command style `#2'% }{}% }% \Ifstr{\@nameuse{scr@#1@style}}{#2}% } % % \end{macrocode} % \end{command} % % \begin{option}{bookmarkpackage} % \changes{v3.26}{2018/06/27}{added} % \changes{v3.39}{2022/11/11}{initial dot removed from member argument of % option storage commands} % Package \pkg{hyperref} has problems with bookmark level gaps. So if % either the users omits a heading level or defines a heading with a level % that distinguish more than one from the previous or following level, there % would be a problem. One recommended solution for this would be to use % package \pkg{bookmark}. So if we load this package, we can use the same % value for bookmark levels and TOC levels even within % \cls*{scrartcl}. Nevertheless we allow the user to decide not to use % \pkg{bookmark}, but then it is not my fault, if something strange % happens. % \begin{macrocode} %<*option> \KOMA@ifkey{bookmarkpackage}{@scr@autoloadbookmarkpackage} \@scr@autoloadbookmarkpackagetrue \KOMA@kav@add{\KOMAClassFileName}{bookmarkpackage}{true} \AfterAtEndOfPackage{hyperref}{% \AtBeginDocument{% \@ifpackageloaded{bookmark}{}{% \if@scr@autoloadbookmarkpackage % \end{macrocode} % \changes{v3.27}{2019/06/26}{try to translate \pkg{hyperref} driver to % \pkg{bookmark} driver option} % The name of the \pkg{hyperref} driver is in \cs{Hy@driver}. But % \pkg{bookmark} does not provide the same drivers, so we try to translate % the curreny known \pkg{hyperref} drivers to \pkg{bookmark} % drivers. Also we do not load \pkg{bookmark} with a driver option but % define \pkg{bookmark}'s \cs{BookmarkDriverDefault}. % \begin{macrocode} \scr@ifundefinedorrelax{Hy@driver}{% \ClassWarning{\KOMAClassName}{% `hyperref' loaded but `\string\Hy@driver' undefined.\MessageBreak This should not happen!\MessageBreak Maybe `hyperref' not loaded or unknown version?% }% }{% % \end{macrocode} % \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} % Note: \texttt{hpdftex}, \texttt{hluatex}, \texttt{hxetex} and \texttt{hvtex} % do not need to be translated, because they are autodetected by % \pkg{bookmark} as well. \texttt{hypertex}, \texttt{hdviwindo}, % \texttt{htex4ht} and \texttt{latex2html} are not known by \pkg{bookmark}, % so we stay with the default (usually \texttt{dvips}). % \begin{macrocode} \Ifstr{\Hy@driver}{hdvips}{% \providecommand*{\BookmarkDriverDefault}{dvips}% }{% \Ifstr{\Hy@driver}{hdvipdfm}{% \providecommand*{\BookmarkDriverDefault}{dvipdfm}% }{% \Ifstr{\Hy@driver}{hdvipson}{% \providecommand*{\BookmarkDriverDefault}{dvipsone}% }{% \Ifstr{\Hy@driver}{htexture}{% \providecommand*{\BookmarkDriverDefault}{textures}% }{% }% }% }% }% }% \ClassInfo{\KOMAClassName}{% loading recommended package `bookmark'.\MessageBreak Using `bookmark' together with `hyperref' is recommended,\MessageBreak because of handling of possible bookmark level gaps.\MessageBreak You can avoid loading `bookmark' with KOMA-Script option\MessageBreak `bookmarkpackage=false' before \string\begin{document} and\MessageBreak you can avoid this message adding:\MessageBreak \space\space\string\usepackage \scr@ifundefinedorrelax{BookmarkDriverDefault}{}{% [\BookmarkDriverDefault]% }{bookmark}\MessageBreak before \string\begin{document}% }% % \end{macrocode} % \changes{v3.33}{2021/02/17}{workaround for catcode changes of % \pkg{babel-spanish}} % For \pkg{babel-spanish} we need to deactivate quoting before loading % \pkg{bookmark}. % \begin{macrocode} \@ifundefined{es@quoting}{% \RequirePackage{bookmark}% }{% \ifx\es@quoting\activatequoting \ClassInfo{\KOMAClassName}{% temporary deactivation of babel-spanish quoting }% \deactivatequoting \RequirePackage{bookmark}% \ClassInfo{\KOMAClassName}{% reactivation of babel-spanish quoting }% \activatequoting \else \RequirePackage{bookmark}% \fi }% % \end{macrocode} % \changes{v3.26b}{2019/01/17}{workaround for \cs{@beginmainauxhook} added} % \changes{v3.38}{2022/10/04}{\pkg{auxhook} not needed with newer \pkg{hyperref}} % Sometimes \pkg{auxhook} is not able to recognize that it cannot use a % patch of \cs{document} to execute \cs{@beginmainauxhook} if it is loaded via % \cs{AtBeginDocument}. In this case we do it here. % \begin{macrocode} \@ifpackagelater{hyperref}{2022/09/22}{}{% \ifx\@beginmainauxhook\relax \else \if@filesw \ClassWarning{\KOMAClassName}{% seems someone has broken package `auxhook'.\MessageBreak Usually this happens, if `auxhook' is loaded or used\MessageBreak implicitly or explicitly by patching \string\document% \scr@ifundefinedorrelax{AtEndPreamble}{}{% \MessageBreak or via etoolbox command \string\AtEndPreamble% }.\MessageBreak Trying an emergency workaround.\MessageBreak You can avoid this warning adding:\MessageBreak \space\space\string\usepackage{auxhook}\MessageBreak before \string\begin{document}% }% \@beginmainauxhook \fi \fi }% \fi }% }% } % % \end{macrocode} % \end{option}^^A bookmarkpackage % % % \subsection{Preambles of parts or chapters} % % The \KOMAScript{} classes \cls*{scrbook} and \cls*{scrreprt} provide % preambles above and below the headings of parts and chapters. The preamble % above is printed into the usual distance above the headings. It does not % increase this distance to avoid \emph{jumping headings}. However here we % have only the generic code for preambles. The user commands are defined by % \cs{scr@dsc@style@chapter@command} and \cs{scr@dsc@style@part@command}. % % \begin{macro}{\use@preamble} % \changes{v2.8p}{2001/09/25}{added} % Used as a general macro to print the stored preamble code and clean the % storage. Preambles are only printed, if the storage is defined. But an empty % defined storage would be printed. The argument is the name of the storage, % e.g., \texttt{chapter@o}, \texttt{chapter@u}, \texttt{part@o}, % \texttt{part@u}. % \begin{macrocode} %<*book|report> %<*body> \newcommand*{\use@preamble}[1]{% \@ifundefined{#1@preamble}{}{% \@nameuse{#1@preamble}% \global\expandafter\let\csname#1@preamble\endcsname=\relax }% } % \end{macrocode} % \end{macro} % \begin{macro}{\set@preamble} % \changes{v2.8p}{2001/09/25}{added} % \changes{v3.20}{2016/04/12}{\cs{@ifnextchar} replaced by % \cs{kernel@ifnextchar}} % Macro % \begin{quote} % \cs{set@preamble}\marg{level name}\oarg{position}\oarg{width}\marg{text} % \end{quote} % defines a preamble code stored into \cs{\meta{preamble name}@preamble}. The % \meta{preamble name} is build depending on the \meta{level name} and the % \meta{position}. The \meta{position} is a combination of vertical and % horizontal position and used to generate not only the \meta{preamble name} % but also options for the \cs{parbox} used to encapsulate the \meta{text} % into a preamble code. The \meta{width} is also used for the \cs{parbox}. % \begin{description} % \item[Note:] The definition of a preamble is global and the definition of a % new preamble of the same \meta{preamble name} overwrite an existing one. % \end{description} % \begin{macro}{\set@@preamble} % \changes{v2.8p}{2001/09/25}{added} % \changes{v3.20}{2016/04/12}{\cs{@ifnextchar} replaced by % \cs{kernel@ifnextchar}} % \begin{macro}{\set@@@preamble} % \changes{v2.8p}{2001/09/25}{added} % \begin{macro}{\set@@@@preamble} % \changes{v2.8p}{2001/09/25}{added} % \changes{v2.8q}{2001/11/27}{missing brace added} % \changes{v3.12}{2012/10/16}{allow \texttt{o} as alias for \texttt{b}} % \changes{v3.12a}{2014/02/14}{\texttt{b} fixed} % We need a lot of helpers because of not using \pkg*{xparse} but having % several optional arguments. At least one optional argument? If not use an % empty default for the first one and \len{hsize} for the second one. % \begin{macrocode} \newcommand*{\set@preamble}[1]{% \kernel@ifnextchar [%] {\set@@preamble{#1}}{\set@@@preamble{#1}[][\hsize]}% } % \end{macrocode} % Or even two optional argument? If not use default \len{hsize}. % \begin{macrocode} \newcommand*{\set@@preamble}{} \def\set@@preamble#1[#2]{% \kernel@ifnextchar [%] {\set@@@preamble{#1}[{#2}]}{\set@@@preamble{#1}[{#2}][\hsize]}% } % \end{macrocode} % From here we know all optional arguments and have to process the composite % \meta{position}. % \begin{macrocode} \newcommand{\set@@@preamble}{} \long\def\set@@@preamble#1[#2][#3]#4{% \begingroup \def\prmbl@pos{#2}\let\prmbl@hpos\relax\let\prmbl@vpos\relax \expandafter \@tfor \expandafter \@tempa \expandafter :\expandafter =\prmbl@pos \do{% \if \@tempa l% \set@preamble@hpos{0}{#2}% \fi% \if \@tempa c% \set@preamble@hpos{1}{#2}% \fi% \if \@tempa r% \set@preamble@hpos{2}{#2}% \fi% \if \@tempa u% \set@preamble@vpos{0}{#2}% \fi% \if \@tempa b% \set@preamble@vpos{0}{#2}% \fi \if \@tempa o% \set@preamble@vpos{1}{#2}% \fi% \if \@tempa t% \set@preamble@vpos{1}{#2}% \fi }% % \end{macrocode} % If the horizontal or vertical position is still unclear use defaults. % \begin{macrocode} \@ifundefined{prmbl@hpos}{\def\prmbl@hpos{0}}{}% \@ifundefined{prmbl@vpos}{\def\prmbl@vpos{0}}{}% % \end{macrocode} % From the vertical position we can build the \meta{preamble name} and the % vertical position of the \cs{parbox} the horizontal is used for the % horizontal skip before and after the \cs{parbox}. % \begin{macrocode} \ifcase\prmbl@hpos \ifcase\prmbl@vpos \set@@@@preamble{#1@u}{t}{#3}{}{\hfil}{#4}% \else \set@@@@preamble{#1@o}{b}{#3}{}{\hfil}{#4}% \fi \or \ifcase\prmbl@vpos \set@@@@preamble{#1@u}{t}{#3}{\hfil}{\hfil}{#4}% \else \set@@@@preamble{#1@o}{b}{#3}{\hfil}{\hfil}{#4}% \fi \else \ifcase\prmbl@vpos \set@@@@preamble{#1@u}{t}{#3}{\hfil}{}{#4}% \else \set@@@@preamble{#1@o}{b}{#3}{\hfil}{}{#4}% \fi \fi \endgroup } % \end{macrocode} % Last but not least add the horizontal aligned \cs{parbox} to the preamble % storage. % \begin{macrocode} \newcommand{\set@@@@preamble}[6]{% \expandafter\gdef\csname #1@preamble\endcsname{% \hbox to\hsize{#4\parbox[{#2}]{#3}{#6\par}#5\par}% }% } % \end{macrocode} % \begin{macro}{\set@preamble@hpos} % \changes{v2.8q}{2001/09/25}{added} % Either store the horizontal preamble position if not yet defined or if % already defined but illegal report it as an error. % \begin{macrocode} \newcommand*{\set@preamble@hpos}[2]{% \@ifundefined{prbml@hpos}{% \def\prmbl@hpos{#1}% }{% \ifnum \prmbl@hpos=0\relax\else% \ClassError{\KOMAClassName}{% inconsistent hpos options% }{% You've said `#2' as position option. But you have to\MessageBreak use only one of `l', `r', or `c' not two of these.\MessageBreak If you'll continue only first hpos option will be used% }% \fi }% } % \end{macrocode} % \end{macro}^^A \set@preamble@hpos % \begin{macro}{\set@preamble@vpos} % \changes{v2.8q}{2001/09/25}{added} % Either store the vertical position if not yet defined or if already defined % but illegal report it as an error. % \begin{macrocode} \newcommand*{\set@preamble@vpos}[2]{% \@ifundefined{prbml@vpos}{% \def\prmbl@vpos{#1}% }{% \ifnum \prmbl@vpos=0\relax\else% \ClassError{\KOMAClassName}{% inconsistent vpos options% }{% You've said `#2' as position option. But you have to\MessageBreak use only one of `t', `o', `b', or `u' not two of these.\MessageBreak If you'll continue only first vpos option will be used% }% \fi }% } % % % \end{macrocode} % \end{macro}^^A \set@preamble@vpos % \end{macro}^^A \set@@@@preamble % \end{macro}^^A \set@@@preamble % \end{macro}^^A \set@@preamble % \end{macro}^^A \set@preamble % % % \subsection{Deprecated code for the ToC} % % Before using \pkg*{tocbasic} we needed additional code for our extended % version of \cs{@dottedtocline}. However this has been removed in % \KOMAScript~v3.36. % % \begin{macro}{\bprot@dottedtocline} % \changes{v2.96a}{2006/11/30}{added} % \changes{v3.27}{2019/02/25}{deprecated} % \changes{v3.36}{2022/03/15}{removed} % \end{macro} % % % \subsection{Rough structuring of books} % % Some books have a kind of rough structuring into front matter, main matter % and back matter. This has consequences for the page numbering and the % numbering of headings and other elements. % % \begin{macro}{\@mainmattertrue,\@mainmatterfalse,\if@mainmatter} % For the numbering of headings and other elements we only need to know % whether we are in the main matter or not, because chapters outside the main % matter do not provide a number. A boolean switch is best for this. By % default we already start with the main matter. % \begin{macrocode} %<*book> %<*body> \newif\if@mainmatter\@mainmattertrue % \end{macrocode} % \end{macro}^^A \@mainmattertrue,\if@mainmatter % % \begin{command}{\frontmatter} % \changes{v2.4e}{1996/07/02}{support for \opt{open\quotechar=any}} % \changes{v2.5h}{1999/12/29}{support for \opt{twoside}} % \changes{v3.00}{2008/09/27}{\cs{cleardoublepage} replaced by % \cs{cleardoubleoddpage}} % Switching to the front matter always needs a new odd page, because we change % the page numbering to lowercase Roman numbers. % \begin{macrocode} \newcommand*\frontmatter{% \if@twoside\cleardoubleoddpage\else\clearpage\fi \@mainmatterfalse\pagenumbering{roman}% } % \end{macrocode} % \end{command}^^A \frontmatter % \begin{command}{\mainmatter} % \changes{v2.4e}{1996/07/02}{support for \opt{open\quotechar=any}} % \changes{v2.5h}{1999/12/29}{support for \opt{twoside}} % \changes{v3.00}{2008/09/27}{\cs{cleardoublepage} replaced by % \cs{cleardoubleoddpage}} % Switching back to main matter always needs a new odd page, because we change % the page numbering to Arabic numbers. % \begin{macrocode} \newcommand*\mainmatter{% \if@twoside\cleardoubleoddpage\else\clearpage\fi \@mainmattertrue\pagenumbering{arabic}% } % \end{macrocode} % \end{command}^^A \mainmatter % \begin{command}{\backmatter} % \changes{v3.00}{2008/09/27}{\cs{cleardoublepage} replaced by % \cs{cleardoubleoddpage}} % Only with \opt{open=right} we start a new odd page when starting the back % matter. % \begin{description} % \item[ToDo:] This does not make any sense, because the page numbering is not % changed. And it seems to be even wrong for \opt{open=left}! So why does % \cls*{book} use this and why shall we do so too? % \end{description} % \begin{macrocode} \newcommand*\backmatter{% \if@openright\cleardoubleoddpage\else\clearpage\fi\@mainmatterfalse } % % % \end{macrocode} % \end{command} % % % \subsection{Appendix} % % The classes (except \cls*{scrlttr2}) does provide an appendix switch, % similar but not identical to the standard classes. % % \begin{command}{\appendix} % Activation of the appendix switch over to numbering of chapters % resp. sections with uppercase letters. % \changes{v2.2d}{1995/05/28}{\cls*{scrartcl} doesn't have a chapter % counter} % \changes{v2.3c}{1995/08/06}{alternative section numbering in appendix} % \changes{v2.8}{2001/06/15}{new \cs{appendixmore}} % \changes{v2.8e}{2001/07/10}{\cs{@altsecnumformattrue} removed} % \changes{v2.8o}{2001/09/19}{initial \cs{par} added} % \changes{v2.95}{2006/07/04}{\cs{newcommand*} replaced by \cs{gdef}} % \changes{v2.95}{2006/07/04}{simplified usage of \cs{appendixmore}} % \changes{v3.20}{2016/12/05}{improved warning} % \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} % \changes{v3.34}{2021/04/30}{\LaTeX{} hook added} % \begin{command}{\appendixmore} % \changes{v2.8}{2001/06/15}{added} % \cs{appendixmore} is deprecated with \LaTeX{} 2020/10/01 (or newer) but % still executed as a kind of hook. % \begin{macrocode} %<*body> \newcommand*\appendix{% \Ifstr{\@currenvir}{appendix}{% \ClassWarning{\KOMAClassName}{% You are using `\string\begin{appendix}...\string\end{appendix}'.\MessageBreak You should note, that `\string\appendix' is a mostly globally\MessageBreak working command not an enviroment with only local\MessageBreak effects. Therefore `\string\end{appendix}' will neither\MessageBreak switch back to normal section numbering nor finish\MessageBreak every other effect of `\string\begin{appendix}'.\MessageBreak Nevertheless, some effects may end with\MessageBreak `\string\end{appendix}' and the document may become\MessageBreak inconsistent.\MessageBreak Because of this, you should remove `\string\end{appendix}'\MessageBreak and replace `\string\begin{appendix}' by command\MessageBreak `\string\appendix'% }% }{}% \par %<*article> \setcounter{section}{0}% \setcounter{subsection}{0}% \gdef\thesection{\@Alph\c@section}% %

%<*report|book> \setcounter{chapter}{0}% \setcounter{section}{0}% \gdef\@chapapp{\appendixname}% \gdef\thechapter{\@Alph\c@chapter}% % } \IfLTXAtLeastTF{2020/10/01}{% \g@addto@macro{\appendix}{\UseOneTimeHook{\KOMAClassName/appendix}}% }{} \g@addto@macro{\appendix}{\csname appendixmore\endcsname} % %<*prepare> \IfLTXAtLeastTF{2020/10/01}{\NewHook{\KOMAClassName/appendix}}{} % % \end{macrocode} % \end{command} % \end{command} % % % \subsection{Parts} % % \begin{macro}{\@thepart} % \changes{v2.8e}{2001/07/10}{removed} % \end{macro} % % The definition of parts depends on the class. % % \begin{fontelement}{partnumber,part} % \changes{v2.8o}{2001/09/14}{pre-added as macro} % \changes{v2.8p}{2001/09/23}{added} % \changes{v2.96a}{2006/12/02}{undocumented support for last macro expects an % argument} % \begin{fontelement}{partprefix} % \changes{v3.18}{2015/06/10}{alias added} % Definition of the font elements used by \cs{part}. The settings are done by % option \texttt{headings} later. Everything is prepared before this option is % used the first time. The elements are defined manually because of % compatibility with \KOMAScript~v2.8o before font elements has been % implemented in \KOMAScript~v2.8p. % \begin{macrocode} %<*prepare> \newcommand*{\size@part}{} \newcommand*{\scr@fnt@part}{\size@part} \newcommand*{\size@partnumber}{} \newcommand*{\scr@fnt@partnumber}{\size@partnumber} \aliaskomafont{partprefix}{partnumber} % % \end{macrocode} % \end{fontelement}^^A partprefix % \end{fontelement}^^A partnumber,part % % % \begin{command}{\partheadstartvskip,\partheadendvskip} % \changes{v2.95a}{2006/07/10}{added} % \changes{v3.15}{2014/11/24}{\cls*{scrartcl} defines and uses % \cs{scr@part@beforeskip} resp. \cs{scr@part@afterskip}} % \begin{command}{\partheadmidvskip} % \changes{v2.95a}{2006/07/10}{added} % \begin{command}{\parheademptypage} % \changes{v3.02}{2009/01/01}{added} % These commands are the distance before and after a part heading, between the % prefix line and the text line of the heading and also the empty retro page % of a part. % % \begin{macro}{\scr@part@sectionbeforeskip,\scr@part@beforeskip} % \changes{v3.15}{2014/11/24}{added} % \changes{v3.17}{2015/03/25}{\cs{scr@part@sectionbeforeskip} renamed to % \cs{scr@part@beforeskip}} % \begin{macro}{\scr@part@sectionafterskip,\scr@part@sectionbeforeskip} % \changes{v3.15}{2014/11/24}{added} % \changes{v3.17}{2015/03/25}{\cs{scr@part@sectionafterskip} renamed to % \cs{scr@part@afterskip}} % \begin{macro}{\scr@part@sectionindent} % \changes{v3.15}{2014/11/24}{added} % \changes{v3.17}{2015/03/24}{removed} % \end{macro}^^A \scr@part@sectionindent % \begin{macro}{\scr@part@innerskip} % \changes{v3.17}{2015/03/24}{added} % \begin{macro}{\scr@part@style} % \changes{v3.15}{2014/11/24}{added} % All the skips and the page style are used by \cs{DeclareSectionCommand} % resp. the style \texttt{part}. We define it as early as possible. Even the % style of \cs{part} is already defined here. % \begin{description} % \item[ToDo:] Do we need them in the \texttt{prepare} run or can we move then % even to the \texttt{body} run? % \item[ToDo:] Do we really need to define \cs{scr@part@style}? % \end{description} % \begin{macrocode} %<*prepare> \newcommand*{\scr@part@beforeskip}{% %

4ex % \end{macrocode} % \begin{description} % \item[Note:] The |+\baselineskip| is needed, to stay as compatible as % possible with prior definitions of \cs{chapterheadstartvskip}. % \end{description} % \begin{macrocode} % \z@ \@plus 1fil + \baselineskip } %\newcommand*{\scr@part@innerskip}{20\p@} \newcommand*{\scr@part@afterskip}{% %

3ex % \z@ \@plus 1fil } \newcommand*{\scr@part@style}{part} % \end{macrocode} % \end{macro}^^A \scr@part@style % \end{macro}^^A \scr@part@afterskip % \end{macro}^^A \scr@part@innerskip % \end{macro}^^A \scr@part@beforeskip % \begin{macrocode} \newcommand*{\partheadstartvskip}{% %

\addvspace{\@tempskipa}% % \null\vskip-\baselineskip\vskip\@tempskipa } \newcommand*{\partheadmidvskip}{% \par\nobreak % \vskip\@tempskipa } \newcommand*{\partheadendvskip}{% %

\vskip\@tempskipa % \vskip\@tempskipa\newpage } %<*report|book> \newcommand*{\partheademptypage}{% \if@twoside\if@openright \null% \thispagestyle{empty}% \newpage \fi\fi } % % % \end{macrocode} % \end{command}^^A \partheademptypage % \end{command}^^A \partheadmidvskip % \end{command}^^A \partheadstartvskip,\partheadendvskip % % % \begin{macro}{\scr@startpart} % \changes{v2.8d}{2001/07/05}{using \cs{partpagestyle}} % \changes{v2.8p}{2001/09/27}{preamble above heading} % \changes{v3.13a}{2014/09/11}{using \cs{SecDef}} % \changes{v3.18}{2015/05/23}{added} % \changes{v3.19}{2015/08/25}{ignoring empty \cs{partpagestyle}} % \changes{v3.26}{2018/10/14}{supporting option \opt{afterindent}} % \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} % The macro % \begin{quote} % \cs{scr@startpart}\marg{part command name} % \end{quote} % is now part of the style \texttt{part}. However, the main parts % of the code are from the original definition of \cs{part}. It has only one % argument: The name of the part command, i.e., \texttt{part}. All arguments % to the part command will be processed later. % \begin{macrocode} %<*body> \newcommand*{\scr@startpart}[1]{% \ExecuteDoHook{heading/preinit/#1}% %

\par %<*book|report> \if@openright\cleardoublepage\else\clearpage\fi \scr@ifundefinedorrelax{#1pagestyle}{}{% \Ifstr{#1pagestyle}{}{}{% \thispagestyle{\@nameuse{#1pagestyle}}% }% }% \if@twocolumn \onecolumn \@tempswatrue \else \@tempswafalse \fi % \@tempskipa=\glueexpr\@nameuse{scr@#1@beforeskip}\relax \@ifundefined{scr@#1@afterindent}{\@afterindentfalse}{% \csname scr@#1@afterindent\endcsname {\@afterindenttrue}{\@afterindentfalse}{% \@afterindenttrue \ifdim\@tempskipa<\z@ \@tempskipa=-\@tempskipa \@afterindentfalse \fi }% }% \ExecuteDoHook{heading/postinit/#1}% \partheadstartvskip %<*book|report> \vbox to\z@{\vss\use@preamble{#1@o}\strut\par}% \vskip-\baselineskip\nobreak % \expandafter\SecDef\csname @#1\expandafter\endcsname\csname @s#1\endcsname } % \end{macrocode} % % \begin{macro}{\scr@@startpart} % \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}\cs{@parskip@indent}} % \changes{v2.95}{2002/08/13}{\cs{centering} and \cs{@parskipfalse}% % \cs{@parskip@indent} switched} % \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} and \cs{@parskip@indent} % replaced} % \changes{v3.18}{2015/05/23}{added} % \changes{v3.27}{2019/07/08}{support for option \opt{nonumber}} % The macro % \begin{quote} % \cs{scr@@startpart}\marg{part command name}\oarg{extended optional % argument}\marg{part heading} % \end{quote} % is now part of the style \texttt{part}. However, the main parts % of the code are from the original definition of \cs{@part}. Therefore it has % the mandatory and optional arguments of a non-star variant of, i.e., % \cs{part} but an additional first argument. % \begin{description} % \item[Note:] \meta{extended optional argument} is named as optional, however % here it is already mandatory, because it is a delimited argument. % \end{description} % \begin{macrocode} \newcommand{\scr@@startpart}{} \long\def\scr@@startpart#1[#2]#3{% \ExecuteDoHook{heading/branch/nostar/#1}% % \end{macrocode} % \changes{v3.10}{2011/08/30}{extended optional argument} % First of all, depending in \opt{headings=optionto\dots} we have different % defaults for the options. % \begin{macrocode} \ifnum \scr@osectarg=\z@ \@scr@tempswafalse \else \scr@istest#2=\@nil \fi \@currentusenumbertrue \if@scr@tempswa \setkeys{KOMAarg.section}{tocentry={#3},head={#3},reference={#3},#2}% \else \ifcase \scr@osectarg\relax \setkeys{KOMAarg.section}{tocentry={#2},head={#2},reference={#2}}% \or \setkeys{KOMAarg.section}{tocentry={#3},head={#2},reference={#3}}% \or \setkeys{KOMAarg.section}{tocentry={#2},head={#3},reference={#2}}% \or \setkeys{KOMAarg.section}{tocentry={#2},head={#2},reference={#2}}% \fi \fi % \end{macrocode} % \changes{v2.8e}{2001/07/10}{using \cs{@maybeautodot}} % \changes{v3.28}{2019/11/19}{\cs{ifnumbered} renamed to % \cs{Ifnumbered}} % \changes{v3.31}{2020/06/02}{\cs{@maybeautodot}\cs{thepart} removed} % For numbered headings we have to increase the counter and write a process % information to the \file{log} and the terminal. % \begin{macrocode} \Ifnumbered{#1}{% \refstepcounter{#1}% \expandafter\@maybeautodot\csname the#1\endcsname \typeout{#1 \csname the#1\endcsname.}% % \end{macrocode} % \changes{v3.08}{2010/11/01}{using \cs{addparttocentry}} % \changes{v3.18}{2015/05/20}{using \cs{add\meta{Name}tocentry} for % \cs{typeout}} % \changes{v3.31}{2020/06/06}{using \cs{\dots tocformat}} % And if the ToC entry is not empty add a numbered entry to the table of % contents. % \begin{description} % \item[ToDo:] Move \cs{autodot} to the definition of \cs{\dots tocformat}. % \end{description} % \begin{macrocode} \ifx\@currenttocentry\@empty\else \@ifundefined{#1tocformat}{% \expandafter\gdef\csname #1tocformat\endcsname {\csname the#1\endcsname}% }{}% \scr@ifundefinedorrelax{add#1tocentry}{% \addtocentrydefault{#1}% }{% \@nameuse{add#1tocentry}% }{\csname\@ifundefined{#1tocformat}{the#1}{#1tocformat}\endcsname}% {\@currenttocentry}% \fi }{% % \end{macrocode} % \changes{v3.18}{2015/05/23}{execute counter reset list for not numbered % headings} % For not numbered headings we still have to process the reset list of the % counter and write a process information to the \file{log} and the terminal. % \begin{macrocode} % \expandafter\ifnum\scr@v@is@ge{3.18}\relax \begingroup \let\@elt\@stpelt \csname cl@#1\endcsname \endgroup % \fi \typeout{#1 without number}% % \end{macrocode} % \changes{v3.08}{2010/11/01}{using \cs{addparttocentry}} % \changes{v3.18}{2015/05/23}{generalized \cs{addparttocentry}} % And before writing a not numbered entry to the table of contents we have to % execute also the \pkg{hyperref} hook \cs{hy@insteadofrefstepcounter}. % \begin{description} % \item[Note:] \pkg*{scrhack} uses the existence of this command to detect a % \KOMAScript{} class. Shouldn't this be changed using, e.g., % \cs{KOMAClassName}? % \end{description} % \begin{macrocode} \ifx\@currenttocentry\@empty\else \hy@insteadofrefstepcounter{#1}% \scr@ifundefinedorrelax{add#1tocentry}{% \addtocentrydefault{#1}% }{% \@nameuse{add#1tocentry}% }{}{\@currenttocentry}% \fi }% % \end{macrocode} % \changes{v2.2c}{1995/05/25}{support for CJK} % \changes{v2.4b}{1996/03/29}{\cs{size@partnumer} replaced by % \cs{size@partnumber}} % \changes{v2.8p}{2001/09/22}{\cs{sectfont} used before \cs{size@part} or % \cs{size@partnumber}} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} after \cs{sectfont}} % \changes{v3.18}{2015/05/23}{\cs{size@\dots} replaced by \cs{usekomafont}} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \changes{v3.25}{2017/09/07}{defining \cs{IfUseNumber} locally} % \changes{v3.25}{2017/09/07}{\cs{sectfont} replaced by \cs{usekomafont}} % \changes{v3.25}{2017/09/07}{using \cs{partlineswithprefixformat}} % \changes{v3.25}{2018/02/12}{using correct fontelement} % \changes{v3.28}{2019/11/19}{\cs{ifnumbered} renamed to % \cs{Ifnumbered}} % Now the main printing code. % \begin{description} % \item[ToDo:] This code is almost the same as \cs{scr@@startchapter}. Only % the procession of the reset list was there already with % \KOMAScript~v3.15. And in \cs{scr@@startchapter} we are using % \cs{@make\meta{name}head} here. So maybe we should do the same here and % really use the same definition instead of having it twice. % \end{description} % \begin{macrocode} \begingroup \def\IfUseNumber{\Ifnumbered{#1}}% \ExecuteDoHook{heading/begingroup/#1}% \setparsizes{\z@}{\z@}{\z@\@plus 1fil}\par@updaterelative \raggedpart \normalfont\usekomafont{disposition}{\nobreak \IfUseNumber{% \partlineswithprefixformat{#1}{% \usekomafont{#1prefix}{\nobreak\@nameuse{#1format}}% % \setlength{\@tempskipa}{\@nameuse{scr@#1@innerskip}}% \partheadmidvskip }{% \usekomafont{#1}{\nobreak\interlinepenalty \@M#3\strut\@@par}% }% }{% \partlineswithprefixformat{#1}{}{% \usekomafont{#1}{\nobreak\interlinepenalty \@M#3\strut\@@par}% } }% % \end{macrocode} % \changes{v3.10}{2011/08/30}{using\cs{@mkboth{}{}} if \cs{partmark} is % \cs{@gobble}} % The running head. % \begin{macrocode} \expandafter\ifx\csname #1mark\endcsname\@gobble \@mkboth{}{}% \else \csname #1mark\expandafter\endcsname\expandafter{\@currentheadentry}% \fi }% \ExecuteDoHook{heading/endgroup/#1}% \endgroup % \end{macrocode} % The final distance. % \begin{macrocode} %<*article> \nobreak \@tempskipa=\glueexpr\@nameuse{scr@#1@afterskip}\relax\relax \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\fi \partheadendvskip %

% \@nameuse{@end#1}% % \end{macrocode} % \changes{v3.26}{2018/10/14}{using \@cs{@afterheading} with % \cls*{scrbook} or \cls*{scrreprt}} % And \cs{@afterheading} for all classes. % \begin{macrocode} \@afterheading } % \end{macrocode} % \end{macro}^^A \scr@@startpart % % \begin{macro}{\scr@@startspart} % \changes{v2.4n}{1997/05/28}{added \cs{chaptermark} resp. % \cs{sectionmark} to star variant} % \changes{v2.6a}{2000/01/20}{using \cs{@mkboth} to delete the running head} % \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}\cs{@parskip@indent}} % \changes{v2.95}{2002/08/13}{\cs{centering} and % \cs{@parskipfalse}\cs{@parskip@indent} swapped} % \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} and\cs{@parskip@indent} % replaced} % \changes{v3.18}{2015/05/23}{added} % The macro % \begin{quote} % \cs{scr@@startspart}\marg{part command name}\marg{part heading} % \end{quote} % is now part of the style \texttt{part}. However, the main parts % of the code are from the original definition of \cs{@spart}. Therefore it has % the mandatory argument of a star variant of, i.e., \cs{part} but an % additional first argument. % \begin{macrocode} \newcommand{\scr@@startspart}[2]{% \ExecuteDoHook{heading/branch/star/#1}% % \end{macrocode} % Some users don't learn to use \cs{addpart} for not numbered parts with entry % to the table of contents but insist in using \cs{addcontentsline}. Despite % this should not be used, because at least \cs{addparttocentry} should be % used, we tolerate this by using our \pkg{hyperref} hook. % \begin{description} % \item[ToDo:] I don't understand why \pkg{hyperref} uses a group here and % locally sets \cs{@mkboth} to \cs{@gobbletwo}. However, I've copied this. % \end{description} % \begin{macrocode} \begingroup \let\@mkboth\@gobbletwo \hy@insteadofrefstepcounter{#1}% \endgroup % \end{macrocode} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \changes{v3.25}{2017/09/07}{difining \cs{IfUseNumber} locally} % \changes{v3.25}{2017/09/07}{\cs{sectfont} replaced by \cs{usekomafont}} % \changes{v3.25}{2017/09/07}{using \cs{partlineswithprefixformat}} % Now the printing similar to \cs{scr@@startpart}. % \begin{macrocode} \begingroup \let\IfUseNumber\@secondoftwo \ExecuteDoHook{heading/begingroup/#1}% \setparsizes{\z@}{\z@}{\z@\@plus 1fil}\par@updaterelative \raggedpart \normalfont\usekomafont{disposition}{% \nobreak \partlineswithprefixformat{#1}{}{% \usekomafont{#1}{\nobreak\interlinepenalty \@M#2\strut\@@par}% }% \@mkboth{}{}% }% \ExecuteDoHook{heading/endgroup/#1}% \endgroup %<*article> \nobreak \@tempskipa=\glueexpr\csname scr@#1@afterskip\endcsname\relax\relax \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\fi \partheadendvskip \@afterheading %

% \@nameuse{@end#1}% } % \end{macrocode} % \end{macro}^^A \scr@@startspart % % \begin{command}{\partlineswithprefixformat} % \changes{v3.25}{2017/09/07}{added} % Command % \begin{quote} % \cs{partlineswithprefixformat}\marg{command name}\marg{number}\marg{text} % \end{quote} % is used to print a part heading with a prefix line. \meta{number} is the % completely formatted prefix line inclusive the vertical distance below. The % \meta{text} is the text of the heading also formatted and with final % \cs{@@par}. But if the user uses more paragraphs than this final one, the % user is responsible to prevent page breaks! % \begin{macrocode} \newcommand{\partlineswithprefixformat}[3]{% #2#3% } % \end{macrocode} % \end{command}^^A \partlineswithprefixformat % % \begin{macro}{\scr@@endpart} % \changes{v2.3g}{1996/01/14}{\cs{@endpart} not defined for \cls*{scrartcl}} % \changes{v2.4e}{1996/07/02}{supporting option \opt{openany}} % \changes{v2.6c}{2000/06/10}{\cs{@endpart} respects \opt{open\quotechar=right}} % \changes{v2.8p}{2001/09/27}{\cs{vbox} added} % \changes{v2.8p}{2001/09/27}{\cs{@part@preamble} replaced by \cs{use@preamble}} % \changes{v3.02}{2009/01/01}{using \cs{partheademptypage}} % \changes{v3.18}{2015/05/23}{added} % Before \KOMAScript~v3.18 this code was part of \cs{part}. \cls*{scrbook} and % \cls*{scrreprt} use this macro to finalize the heading, e.g., print a % preamble, to the final distance or new page and add an empty retro % page. \cls*{scrartcl} does not have such a command, because with % \cls*{scrartcl} parts are simple headings not pages. As usual the argument % is the name of the part command, e.g., \texttt{part}. % \begin{macrocode} %<*book|report> \newcommand*{\scr@@endpart}[1]{% \vbox to\z@{\use@preamble{#1@u}\vss}% \@tempskipa=\glueexpr\csname scr@#1@afterskip\endcsname\relax\relax \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\fi \partheadendvskip \partheademptypage \if@tempswa \twocolumn \fi } % % \end{macrocode} % \end{macro}^^A \scr@@endpart % \end{macro}^^A \scr@startpart % % % \begin{macro}{\hy@insteadofrefstepcounter} % \changes{v3.18}{2015/05/22}{added to be used by \pkg{hyperref}} % \begin{macro}{\scr@chapter@before@hyperref@patch} % \changes{v3.27}{2019/07/24}{added to be used by \pkg*{scrhack}} % \begin{macro}{\scr@chapter@after@hyperref@patch} % \changes{v3.27}{2019/07/24}{added to be used by \pkg*{scrhack}} % \changes{v3.32}{2020/09/11}{\cs{AfterPackage!} replaced by % \cs{AfterAtEndOfPackage}} % Usually \pkg{hyperref} uses \cs{refstepcounter} to process extra codes for % anchors and bookmarks. However, if a not numbered heading is used, % \pkg{hyperref} cannot use \cs{refstepcounter} but still has to add % code. Usually \pkg{hyperref} patchs several commands like \cs{@chapter}, % \cs{@schapter}, \cs{@part}, \cs{@spart} etc. to do so. But I think, it would % be better to provide a hook for this, \pkg*{hyperref} can change. So we've % designed \cs{hy@insteadofrefstepcounter}. Unfortunately \pkg{hyperref} % currently does not care for this, but still does its patches. So we need to % prevent \pkg{hyperref} from doing so and additionally define % \cs{hy@insteadofrefstepcounter} ourselves. But because \cs{autoref} is % nonsense for not numbered headings, I do not use \cs{Hy@chapapp} for % \cs{Hy@MakeCurrentHrefAuto}. % \begin{description} % \item[ToDo:] Explain the Oberdiek support team, what we are doing here and % what they should do. % \end{description} % \begin{macrocode} \newcommand*{\hy@insteadofrefstepcounter}[1]{} \let\hy@insteadofrefstepcounter\@gobble \newcommand*{\scr@chapter@before@hyperref@patch}{% \let\scr@orig@chapter\@chapter \let\scr@orig@schapter\@schapter \let\scr@orig@addchap\@addchap } \BeforePackage{hyperref}{\scr@chapter@before@hyperref@patch} \newcommand*{\scr@chapter@after@hyperref@patch}{% \let\@chapter\scr@orig@chapter \let\@schapter\scr@orig@schapter \let\@addchap\scr@orig@addchap \ifx\hy@insteadofrefstepcounter\@gobble \renewcommand*{\hy@insteadofrefstepcounter}[1]{% \Hy@MakeCurrentHrefAuto{##1*}% \Hy@raisedlink{% \hyper@anchorstart{\@currentHref}\hyper@anchorend }% }% \fi } \AfterAtEndOfPackage{hyperref}{\scr@chapter@after@hyperref@patch} % \end{macrocode} % \end{macro}^^A \scr@after@hyperref@patch % \end{macro}^^A \scr@before@hyperref@patch % \end{macro}^^A \hy@insteadofrefstepcounter % % \begin{command}{\addparttocentry} % \changes{v3.08}{2010/11/01}{added} % We do not use \cs{addcontentsline} directly for the entries to the table of % contents. Using % \begin{quote} % \cs{addparttocentry}\marg{number}\marg{text} % \end{quote} % allows easy manipulation of such entries and additional actions. If the % \meta{number} is completely empty no number should be used. Internally the % generic \cs{addtocentrydefault} it used, which uses \cs{nonumberline} % instead of \cs{numberline} in this case. See \file{scrkernel-listsof.dtx} % for more information. % \begin{macrocode} \newcommand*{\addparttocentry}[2]{% \addtocentrydefault{part}{#1}{#2}% } % \end{macrocode} % \end{command}^^A \addparttocentry % % % \begin{command}{\part} % \changes{v3.18}{2015/05/23}{indirect definition} % \begin{macro}{\@part,\@spart,\@endpart} % \changes{v3.18}{2015/05/23}{indirect definition} % \begin{command}{\setpartpreamble} % \changes{v2.8f}{2001/07/12}{added} % \changes{v2.8p}{2001/09/27}{using \cs{use@preamble}} % \changes{v3.18}{2015/05/23}{indirect definition} % \begin{macro}{\part@preamble,\part@u@preamble} % \changes{v2.8p}{2001/09/27}{added} % \changes{v2.8p}{2001/09/27}{\cs{part@preamble} renamed to \cs{part@u@preamble}} % \changes{v3.12a}{2014/02/14}{name fixed} % \changes{v3.18}{2015/05/23}{indirect definition} % \begin{macro}{\part@o@preamble} % \changes{v2.8p}{2001/09/27}{added} % \changes{v3.12a}{2014/02/14}{name fixed} % \changes{v3.18}{2015/05/23}{indirect definition} % All these commands and macros are not defined explicitly but by using % \cs{DeclareSectionCommand} later. See also % \cs{scr@dsc@def@style@part@command} and \cs{setpartpreamble}. % \end{macro}^^A \part@o@preamble % \end{macro}^^A \part@u@preamble % \end{command}^^A \setpartpreamble % \end{macro}^^A \@part,\@spart,\@endpart % \end{command}^^A \part % % \begin{command}{\addpart} % \changes{v2.8c}{2001/06/29}{added} % \changes{v2.8d}{2001/07/05}{using \cs{partpagestyle}} % \changes{v2.95a}{2006/07/10}{support of preamble added} % \changes{v3.11b}{2012/07/29}{missing negativ \cs{vskip} added} % \changes{v3.13a}{2014/09/11}{using \cs{SecDef}} % \changes{v3.15a}{2015/01/22}{distance adaption} % \changes{v3.18}{2015/05/25}{redefinition} % \begin{macro}{\@addpart} % \changes{v2.8c}{2001/06/29}{added} % \changes{v2.8l}{2001/08/17}{first ToC then output} % \changes{v2.95}{2004/07/20}{support for running head} % \changes{v3.00}{2008/07/01}{\pkg{hyperref} workaround} % \changes{v3.08}{2010/11/02}{using \cs{addparttocentry}} % \changes{v3.10}{2011/08/30}{extended optional argument} % \changes{v3.10}{2011/08/30}{using \cs{@mkboth{}{}} if \cs{partmark} is % \cs{@gobble}} % \changes{v3.17}{2015/04/20}{using \cs{addpartmark} but never \cs{@mkboth}} % \changes{v3.18}{2015/05/25}{redefinition} % \begin{macro}{\@saddpart} % \changes{v2.8c}{2001/06/29}{added} % \changes{v3.18}{2015/05/25}{redefinition} % The improved not numbered version of \cs{part}. Note: This could also be % done using the extended optional argument of \cs{part} and option % \opt{nonumber=true}. So this command becomes more and more deprecated. % \begin{macrocode} \newcommand\addpart{% \SecDef\@addpart\@saddpart } \newcommand*{\@addpart}{} \long\def\@addpart[#1]#2{% \edef\reserved@a{% \unexpanded{% \part[{#1}]{#2}% \c@secnumdepth= }\the\c@secnumdepth\relax }% \c@secnumdepth=\numexpr \partnumdepth-1\relax \reserved@a } \newcommand{\@saddpart}[1]{% \part*{#1}% \addpartmark{}% } % \end{macrocode} % \end{macro}^^A \@saddpart % \end{macro}^^A \@addpart % \end{command}^^A \addpart % % % \begin{macro}{\l@part} % \changes{v2.97c}{2007/06/21}{\cs{sectfont}\cs{large} replaced by font % element \fnt{partentry}} % \changes{v2.97c}{2007/06/21}{using font element \fnt{partentrypagenumber}} % \changes{v3.15}{2014/12/23}{using \cs{parttocdepth} and % \cs{scr@part@numwidth}} % \changes{v3.20}{2015/10/06}{replaced by usage of ToC style} % \begin{macro}{\scr@part@tocindent} % \changes{v3.15}{2014/12/02}{added} % \changes{v3.18}{2015/06/09}{indirect by \cs{DeclareSectionCommand}} % \end{macro}^^A \scr@part@tocindent % \begin{macro}{\scr@part@tocnumwidth} % \changes{v3.15}{2014/12/02}{added} % \changes{v3.18}{2015/06/09}{indirect by\cs{DeclareSectionCommand}} % These macros are not longer defined explicitly but by % \cs{DeclareTOCEntryStyle} and indirectly by \cs{DeclareSectionCommand}. % \end{macro} % \end{macro}^^A \l@part % % % \begin{counter}{part} % \begin{command}{\thepart} % \begin{command}{\partformat} % \changes{v2.3c}{1995/08/06}{auto dot feature} % \changes{v2.5f}{1999/02/14}{orphan spaces removed} % \changes{v2.7h}{2001/04/22}{missing backslash of \cs{autodot} fixed} % Because we don't use the default Arabic numbering, we still define the % counter for \cs{part}, it's printing and the formatting explicitly. % \begin{macrocode} \newcounter{part} \renewcommand*{\thepart}{\@Roman\c@part} \newcommand*{\partformat}{\partname~\thepart\autodot} % \end{macrocode} % \end{command}^^A \partformat % \end{command}^^A \thepart % \end{counter}{part} % % % \begin{command}{\partname} % \changes{v3.36}{2022/03/15}{explicit definition for English languages} % The name of a part used for the prefix line and maybe for the ToC entry. % \begin{macrocode} \newcommand*\partname{Part} \providecaptionname{american,australian,british,canadian,english,newzealand,% UKenglish,ukenglish,USenglish,usenglish}\partname{Part} % \end{macrocode} % \end{command}^^A \partname % % % \begin{command}{\partmark} % \changes{v2.9r}{2004/07/20}{added} % \changes{v3.18}{2015/05/24}{default changed from \cs{@gobble} to % \cs{@mkboth{}{}}} % Initially \cs{part} should simply empty the left and right mark if an % automatic running head is used. This is independent from the page style. % \begin{macrocode} \newcommand*{\partmark}[1]{\@mkboth{}{}} % \end{macrocode} % \end{command}^^A \partmark % % \begin{command}{\addpartmark} % \changes{v3.17}{2015/04/20}{added} % \changes{v3.18}{2015/05/24}{depends on \cs{partnumdepth}} % To be used to add the marks with \cs{addpart}. Locally we define % \cs{if@mainmatter}, because it makes life easier for users or package % authors, who (re-)define \cs{partmark}. % \begin{macrocode} \newcommand*\addpartmark[1]{% \begingroup \expandafter\let\csname if@mainmatter\expandafter\endcsname \csname iffalse\endcsname \c@secnumdepth=\numexpr \partnumdepth-1\relax \partmark{#1}% \endgroup } % \end{macrocode} % \end{command}^^A \addpartmark % % % \begin{command}{\raggedpart} % \changes{v2.95a}{2006/07/10}{added} % Style \texttt{part} does not use \cs{raggedsection} but % \cs{raggedpart}. However for \cls*{scrartcl} the default is the same. But % \cls*{scrbook} and \cls*{scrreprt} use \cs{centering} as default. % \begin{description} % \item[Note:] Because of using \cs{let} inside a class, \cs{raggedright} % should be without hyphenation when we define \cs{raggedpart}. % \end{description} % \begin{macrocode} \newcommand*{\raggedpart}{} %

\let\raggedpart\raggedsection %\let\raggedpart\centering % \end{macrocode} % \end{command} % % \begin{fontelement}{partentry} % \changes{v2.97c}{2007/06/21}{added} % \changes{v3.06}{2010/06/09}{\fnt{sectioning} replaced by \fnt{disposition}} % \cs{part} entries to the table of contents are \cs{large}. % \begin{macrocode} \newkomafont{partentry}{\usekomafont{disposition}\large} % \end{macrocode} % \end{fontelement} % % \begin{fontelement}{partentrypagenumber} % \changes{v2.97c}{2007/06/21}{added} % The page number of the ToC entry should be unchanged. % \begin{macrocode} \newkomafont{partentrypagenumber}{} % % \end{macrocode} % \end{fontelement} % % % \subsection{Chapters} % % Classes \cls*{scrbook} and \cls*{scrreprt} provide chapters. These are % realized by \cs{DeclareSectionCommand} and the \texttt{chapter} style. The % style is represented by \cs{scr@dsc@def@style@chapter@command} and several % helpers. % \begin{description} % \item[Note:] Package \pkg{hyperref} is not really compatible with % \KOMAScript{} classes, because it redefines \cs{@schapter} and % \cs{@chapter} incompatible. However, currently \KOMAScript{} has a build % in workaround for this. But this workaround itself depends on internal % code of \pkg{hyperref}. It would be better, if \pkg{hyperref} would % provide an interface for class authors and would redefine internal macros % of classes only as fallback if classes do not use this % interface. \KOMAScript{} also provides an alternative. \pkg*{hyperref} % could redefine a single command \cs{hy@insteadofrefstepcounter}. % \item[Note:] Any package, that changes internal macros like \cs{@chapter}, % \cs{@schapter}, \cs{@makechapterhead}, \cs{@makeschapterhead} is % incompatible with \KOMAScript{} classes. Neither \KOMAScript{} nor the % \KOMAScript{} author is responsible for this. Package authors are welcome % to ask for interfaces they need, e.g., a good idea would be to define a % own headings style. % \end{description} % % \begin{option}{chapterprefix} % \changes{v2.8}{2001/06/15}{added} % \changes{v2.95c}{2006/08/21}{changed to \pkg{keyval} option} % \changes{v3.18}{2015/05/22}{option correlates with style not level} % \changes{v3.39}{2022/11/11}{initial dot removed from member argument of % option storage commands} % \begin{macro}{\@chapterprefixtrue,\@chapterprefixfalse,\if@chapterprefix} % Initially \KOMAScript{} does not use the enormous chapter headings with % prefix line ``Chapter \meta{number}'' but a more subtle one. However, either % \opt{chapterprefix} or \opt{headings=twolinechapter} can be used to % reactivate the prefix line. The current setting is available via the boolean % switch \cs{if@chapterprefix}. % \begin{macrocode} %<*book|report> %\newif\if@chapterprefix %<*option> \KOMA@key{chapterprefix}[true]{% \KOMA@set@ifkey{chapterprefix}{@chapterprefix}{#1}% \ifx\FamilyKeyState\FamilyKeyStateProcessed \KOMA@kav@replacebool{\KOMAClassFileName}% {chapterprefix}{@chapterprefix}% \KOMA@kav@remove{\KOMAClassFileName}% {headings}{twolinechapter}% \KOMA@kav@remove{\KOMAClassFileName}% {headings}{onelinechapter}% \KOMA@kav@xadd{\KOMAClassFileName}% {headings}{% \if@chapterprefix twolinechapter\else onelinechapter\fi }% \fi } \KOMA@kav@add{\KOMAClassFileName}{headings}{onelinechapter}% % \end{macrocode} % \begin{option}{nochapterprefix} % \changes{v2.8}{2001/06/15}{added} % \changes{v2.95c}{2006/08/21}{obsolete} % \changes{v3.01a}{2008/11/20}{deprecated} % \changes{v3.99}{2022/11/16}{removed from \KOMAScript~4} % Deprecated option for compatibility with \KOMAScript~2.9u only. % \begin{macrocode} %\KOMA@DeclareDeprecatedOption{nochapterprefix}{chapterprefix=false} % % \end{macrocode} % \end{option}^^A nochapterprefix % \end{macro}^^A \if@chapterprefix % \end{option}^^A chapterprefix % % % \begin{option}{appendixprefix} % \changes{v2.8}{2001/06/15}{added} % \changes{v2.95c}{2006/08/21}{re-implementation as \pkg{keyval} option} % \changes{v3.12}{2013/03/05}{usage of \cs{FamilyKeyState}} % \changes{v3.17}{2015/03/09}{internal value storage} % \changes{v3.34}{2021/04/30}{usage of \LaTeX{} hook, if available} % \changes{v3.34}{2021/04/30}{new value \opt{\quotechar=default} with \LaTeX{} % hooks} % \changes{v3.39}{2022/11/11}{initial dot removed from member argument of % option storage commands} % If the appendix chapters should be with or without prefix line independent % from the chapters of the main part, option \opt{appendixprefix} can be % used. This does not set up a new boolean but just activates or deactivates % the boolean for chapters inside \cs{appendix}. From \KOMAScript{} v3.34 and % \LaTeX{} 2020/10/01 this is done using a new \LaTeX{} hook. Otherwise still % \cs{appendixmore} is used. Default is, using the settings for chapters. % \begin{macrocode} %<*option> \IfLTXAtLeastTF{2020/10/01}{% \KOMA@key{appendixprefix}[true]{% \Ifstr{#1}{default}{% \KOMA@kav@removekey{\KOMAClassFileName}{appendixprefix}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{twolineappendix}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{onelineappendix}% \IfHookEmptyTF{\KOMAClassName/appendix}{}{% \RemoveFromHook{\KOMAClassName/appendix}[appendixprefix]% }% \FamilyKeyStateProcessed }{% \KOMA@set@ifkey{appendixprefix}{@tempswa}{#1}% \ifx\FamilyKeyState\FamilyKeyStateProcessed \KOMA@kav@xreplacevalue{\KOMAClassFileName}{appendixprefix}{#1}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{twolineappendix}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{onelineappendix}% \IfHookEmptyTF{\KOMAClassName/appendix}{}{% \RemoveFromHook{\KOMAClassName/appendix}[appendixprefix]% }% \if@tempswa \KOMA@kav@add{\KOMAClassFileName}{headings}{twolineappendix}% \AddToHook{\KOMAClassName/appendix}[appendixprefix]% {\@chapterprefixtrue}% \else \KOMA@kav@add{\KOMAClassFileName}{headings}{onelineappendix}% \AddToHook{\KOMAClassName/appendix}[appendixprefix]% {\@chapterprefixfalse}% \fi \fi }% }% }{% \KOMA@key{appendixprefix}[true]{% \KOMA@set@ifkey{appendixprefix}{@tempswa}{#1}% \ifx\FamilyKeyState\FamilyKeyStateProcessed \KOMA@kav@xreplacevalue{\KOMAClassFileName}{appendixprefix}{#1}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{twolineappendix}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{onelineappendix}% \if@tempswa \KOMA@kav@add{\KOMAClassFileName}{headings}{twolineappendix}% \@ifundefined{appendixmore}{% \def\appendixmore{\@chapterprefixtrue}% }{% \l@addto@macro\appendixmore{\@chapterprefixtrue}% }% \else \KOMA@kav@add{\KOMAClassFileName}{headings}{onelineappendix}% \@ifundefined{appendixmore}{% \def\appendixmore{\@chapterprefixfalse}% }{% \l@addto@macro\appendixmore{\@chapterprefixfalse}% }% \fi \fi }% } % \end{macrocode} % \begin{option}{noappendixprefix} % \changes{v2.8}{2001/06/15}{added} % \changes{v2.95c}{2006/08/21}{obsolete} % \changes{v3.01a}{2008/11/20}{deprecated} % \changes{v3.99}{2022/11/16}{removed from \KOMAScript~4} % \begin{macrocode} %\KOMA@DeclareDeprecatedOption{noappendixprefix}{appendixprefix=false} % % \end{macrocode} % \end{option}^^A noappendixprefix % \end{option}^^A appendixprefix % % % \begin{fontelement}{chapter} % \changes{v2.8o}{2001/09/14}{added} % \changes{v2.96a}{2006/12/02}{undocumented support for last macro expects an % argument} % \begin{fontelement}{chapterprefix} % \changes{v2.8o}{2001/09/14}{added by macro} % \changes{v2.96a}{2006/12/02}{added} % Definition of the font elements used by \cs{chapter}. The settings are done % by option \opt{headings} later. Everything is prepared before this option % is used the first time. The manual definition is used, because of % compatibility with \KOMAScript{} 2.9u. However, using the old macros is % deprecated and not supported any longer. % \begin{macrocode} %<*prepare> \newcommand*{\size@chapter}{} \newcommand*{\scr@fnt@chapter}{\size@chapter} \newcommand*{\size@chapterprefix}{\size@chapter} \newcommand*{\scr@fnt@chapterprefix}{\size@chapterprefix} % % \end{macrocode} % \end{fontelement}^^A chapterprefix % \end{fontelement}^^A chapter % % % \begin{command}{\chapterheadstartvskip} % \changes{v3.15}{2014/11/24}{defining and using \cs{scr@chapter@beforeskip}} % \begin{command}{\chapterheadmidvskip} % \changes{v3.15}{2014/11/20}{added} % \changes{v3.17}{2015/03/25}{defining and using \cs{scr@chapter@innerskip}} % \begin{command}{\chapterheadendvskip} % \changes{v3.11c}{2013/02/13}{\cs{chapterheadstartvskip} and % \cs{chapterheadendvskip} removed from \cls*{scrartcl}} % \changes{v3.15}{2014/11/24}{defining and using \cs{scr@chapter@afterskip}} % \changes{v3.15}{2014/12/10}{\cs{vspace} replaced by \cs{vskip} because of % \cs{lastskip}} % These commands are the distance before a chapter heading, between the % prefix line and the text line of the heading and after the chapter heading. % \cs{chapterheadmidvskip} is only used with option \opt{chapterprefix} % resp. \opt{headings=twolinechapter}. % % \begin{macro}{\scr@chapter@sectionbeforeskip,\scr@chapter@beforeskip} % \changes{v3.15}{2014/11/24}{added} % \changes{v3.17}{2015/03/25}{\cs{scr@chapter@sectionbeforeskip} renamed to % \cs{scr@chapter@beforeskip}} % \begin{macro}{\scr@chapter@innerskip} % \changes{v3.17}{2015/03/25}{added} % \begin{macro}{\scr@chapter@sectionafterskip,\scr@chapter@afterskip} % \changes{v3.15}{2014/11/24}{added} % \changes{v3.17}{2015/03/25}{\cs{scr@chapter@sectionafterskip} renamed to % \cs{scr@chapter@afterskip}} % \begin{macro}{\scr@chapter@sectionindent} % \changes{v3.15}{2014/11/24}{added} % \changes{v3.17}{2015/04/24}{removed} % \end{macro}^^A \scr@chapter@sectionindent % \begin{macro}{\scr@chapter@style} % \changes{v3.15}{2014/11/24}{added} % All the skips and the page style are used by \cs{DeclareSectionCommand} % resp. the style \texttt{chapter}. We define it as early as possible. Even the % style of \cs{chapter} is already defined here. % \begin{description} % \item[ToDo:] Do we need them in the \texttt{prepare} run or can we move then % even to the \texttt{body} run? % \item[ToDo:] Do we really need to define \cs{scr@chapter@style}? % \end{description} % \begin{macrocode} %<*prepare> \newcommand*{\scr@chapter@beforeskip}{\z@} \let\scr@chapter@beforeskip\z@ \newcommand*{\scr@chapter@afterskip}{\z@} \let\scr@chapter@afterskip\z@ \newcommand*{\scr@chapter@innerskip}{\z@} \let\scr@chapter@innerskip\z@ \newcommand*{\scr@chapter@style}{chapter} % \end{macrocode} % \end{macro}^^A \scr@chapter@style % \end{macro}^^A \scr@chapter@afterskip % \end{macro}^^A \scr@chapter@innerskip % \end{macro}^^A \scr@chapter@beforeskip % \begin{macrocode} \newcommand*{\chapterheadstartvskip}{\vspace{\@tempskipa}} \newcommand*{\chapterheadendvskip}{\vskip\@tempskipa} \newcommand*{\chapterheadmidvskip}{\par\nobreak\vskip\@tempskipa} % % \end{macrocode} % \end{command}^^A \chapterheadendvskip % \end{command}^^A \chapterheadmidvskip % \end{command}^^A \chapterheadstartvskip % % % \begin{macro}{\scr@startchapter} % \changes{v3.18}{2015/05/22}{added} % \changes{v3.19}{2015/08/25}{ignore empty page styles} % The macro % \begin{quote} % \cs{scr@startchapter}\marg{chapter command name} % \end{quote} % is now part of the style \texttt{chapter}. However, the main parts % of the code are from the original definition of \cs{chapter}. It has only one % argument: The name of the chapter command, i.e., \texttt{chapter}. All % arguments to the part command will be processed later. % \begin{macrocode} %<*body> \newcommand*{\scr@startchapter}[1]{% \ExecuteDoHook{heading/preinit/#1}% \if@openright\cleardoublepage\else\clearpage\fi \scr@ifundefinedorrelax{#1pagestyle}{}{% \Ifstr{#1pagestyle}{}{}{% \thispagestyle{\@nameuse{#1pagestyle}}% }% }% \global\@topnum\z@ \@ifundefined{scr@#1@afterindent}{\@afterindentfalse}{% \csname scr@#1@afterindent\endcsname {\@afterindenttrue}{\@afterindentfalse}{% \@afterindenttrue \@ifundefined{scr@#1@beforeskip}{\@afterindentfalse}{% \ifdim\glueexpr\@nameuse{scr@#1@beforeskip}\relax<\z@ \@afterindentfalse \fi }% }% }% \ExecuteDoHook{heading/postinit/#1}% \expandafter\SecDef\csname @#1\expandafter\endcsname\csname @s#1\endcsname } % \end{macrocode} % % \begin{macro}{\scr@@startchapter} % \changes{v3.18}{2015/05/22}{added} % The macro % \begin{quote} % \cs{scr@@startchapter}\marg{chapter command name}\oarg{extended optional % argument}\marg{chapter heading} % \end{quote} % is now part of the style \texttt{chapter}. However, the main parts % of the code are from the original definition of \cs{@chapter}. Therefore it % has the mandatory and optional arguments of a non-star variant of, i.e., % \cs{chapter} but an additional first argument. % \begin{description} % \item[Note:] \meta{extended optional argument} is named as optional, however % here it is already mandatory, because it is a delimited argument. % \end{description} % \begin{macrocode} \newcommand*{\scr@@startchapter}{} \def\scr@@startchapter#1[#2]#3{% \ExecuteDoHook{heading/branch/nostar/#1}% % \end{macrocode} % \changes{v3.10}{2011/08/30}{extended optional argument} % \changes{v3.27}{2019/07/08}{option \opt{nonumber} added} % First of all, depending in \opt{headings=optionto\dots} we have different % defaults for the options. % \begin{macrocode} \ifnum \scr@osectarg=\z@ \@scr@tempswafalse \else \scr@istest#2=\@nil \fi \@currentusenumbertrue \if@scr@tempswa \setkeys{KOMAarg.section}{tocentry={#3},head={#3},reference={#3},#2}% \else \ifcase \scr@osectarg\relax \setkeys{KOMAarg.section}{tocentry={#2},head={#2},reference={#2}}% \or \setkeys{KOMAarg.section}{tocentry={#3},head={#2},reference={#3}}% \or \setkeys{KOMAarg.section}{tocentry={#2},head={#3},reference={#2}}% \or \setkeys{KOMAarg.section}{tocentry={#2},head={#2},reference={#2}}% \fi \fi % \end{macrocode} % \changes{v2.8e}{2001/07/10}{using \cs{@maybeautodot}} % \changes{v3.08}{2010/11/01}{using \cs{addchaptertocentry}} % \changes{v3.18}{2015/05/20}{using \cs{add\meta{name}tocentry}} % \changes{v3.18}{2015/05/22}{using \meta{name} instead of \cs{@chapapp} % in \cs{typeout}} % \changes{v3.28}{2019/11/19}{\cs{ifnumbered} renamed to % \cs{Ifnumbered}} % For numbered headings we have to increase the counter and write a process % information to the \file{log} and the terminal. % \begin{macrocode} \Ifnumbered{#1}{% % \if@mainmatter \@tempswatrue % \else\@tempswafalse\fi }{\@tempswafalse}% \if@tempswa \refstepcounter{#1}% \expandafter\@maybeautodot\csname the#1\endcsname \typeout{#1 \csname the#1\endcsname.}% \ifx\@currenttocentry\@empty\else % \end{macrocode} % \changes{v3.31}{2020/06/06}{using \cs{\dots tocformat}}% % \begin{description} % \item[ToDo]: Move \cs{autodot} to the definition of \cs{\dots tocformat}. % \end{description} % \begin{macrocode} \@ifundefined{#1tocformat}{% \expandafter\gdef\csname #1tocformat\endcsname {\csname the#1\endcsname}% }{}% \scr@ifundefinedorrelax{add#1tocentry}{% \addtocentrydefault{#1}% }{% \@nameuse{add#1tocentry}% }{\csname\@ifundefined{#1tocformat}{the#1}{#1tocformat}\endcsname}% {\@currenttocentry}% \fi \else % \end{macrocode} % For not numbered headings we still have to process the reset list of the % counter and write a process information to the \file{log} and the terminal. % \begin{macrocode} % \expandafter\ifnum\scr@v@is@ge{3.15}\relax \begingroup \let\@elt\@stpelt \csname cl@#1\endcsname \endgroup % \fi \typeout{#1 without number}% \ifx\@currenttocentry\@empty\else % \end{macrocode} % And before writing a not numbered entry to the table of contents we have to % execute also the \pkg{hyperref} hook \cs{hy@insteadofrefstepcounter}. % \begin{description} % \item[Note:] \pkg*{scrhack} uses the existence of this command to detect a % \KOMAScript{} class. Shouldn't this be changed using, e.g., % \cs{KOMAClassName}? % \end{description} % \begin{macrocode} \hy@insteadofrefstepcounter{#1}% \scr@ifundefinedorrelax{add#1tocentry}{% \addtocentrydefault{#1}% }{% \@nameuse{add#1tocentry}% }{}{\@currenttocentry}% \fi \fi % \end{macrocode} % Set the mark for the running head. Here we have to do a one step expansion % of \cs{@currentheadentry}, because otherwise it would change with every % \cs{section}, \cs{subsection} \dots % \begin{macrocode} \csname #1mark\expandafter\endcsname\expandafter{\@currentheadentry}% % \end{macrocode} % \changes{v2.8g}{2001/07/18}{support for \cs{float@addtolists}} % \changes{v3.28}{2019/11/19}{\cs{iftocfeature} replaced by \cs{Iftocfeature}} % Depending on feature \texttt{chapteratlist} we have to add a vertical space % to other directories. And for compatibility we also support the deprecated % \cs{float@addtolists} but not without warning. % \begin{description} % \item[ToDo:] Why do we add the gap here but also use \cs{addctontentsline} % in \cs{addchaptertocentry}? Is this a bug? Should this be standardized? % \end{description} % \begin{macrocode} \ifdim \@chapterlistsgap>\z@ \doforeachtocfile{% \Iftocfeature{\@currext}{chapteratlist}{% \addtocontents{\@currext}{\protect\addvspace{\@chapterlistsgap}}% }{}% }% \@ifundefined{float@addtolists}{}{% \scr@float@addtolists@warning \float@addtolists{\protect\addvspace{\@chapterlistsgap}}% }% \fi % \end{macrocode} % \changes{v3.18}{2015/05/22}{\cs{@makechapterhead} replaced by % \cs{@make\meta{Name}head}} % \changes{v3.36}{2022/03/16}{warning about deprecated \cs{@makechapterhead}} % Setting the heading itself is more or less a call of \cs{@make\meta{command % name}head}. % \begin{description} % \item[ToDo:] Using \cs{scr@makechapterhead}\marg{command name} would be the % better solution. However in this case, every redefinition of % \cs{@makechapterhead} would be ignored. So currently we support such % deprecated redefinition of internal macro \cs{@makechapterhead} for % \cs{chapter}. But this will be changed in future. % \end{description} % \begin{macrocode} \scr@t@st@nd@w@rn@m@k@ch@pt@rh@@d{#1}% \if@twocolumn \if@at@twocolumn \@nameuse{@make#1head}{#3}% \else \@topnewpage[\@nameuse{@make#1head}{#3}]% \fi \else \@nameuse{@make#1head}{#3}% \fi % \end{macrocode} % \changes{v3.18}{2015/05/21}{always using \cs{@afterheading}} % And finally the end of every outline command. % \begin{macrocode} \@afterheading } % \end{macrocode} % \begin{macro}{\scr@t@st@nd@w@rn@m@k@ch@pt@rh@@d} % \changes{v3.36}{2022/03/16}{added} % The test and warning used inside \cs{scr@@startchapter}. % \begin{macrocode} %\expandafter\ifnum\scr@v@is@ge{3.36}% \newcommand*{\scr@t@st@nd@w@rn@m@k@ch@pt@rh@@d}[1]{% \Ifstr{#1}{chapter}{% \begingroup \def\reserved@a{\scr@makechapterhead{chapter}}% \ifx\@makechapterhead\reserved@a\else \ClassWarningNoLine{\KOMAClassName}{% Redefinition of \string\@makechapterhead\space detected.\MessageBreak Note: KOMA-Script does use styles for commands like\MessageBreak \string\chapter. Currently it internally still provides and\MessageBreak uses \string\@makechapterhead, but a completely different\MessageBreak definition compared to the standard classes.\MessageBreak So redefining or using internal \string\@makechapterhead\MessageBreak by users or package authors may already break\MessageBreak KOMA-Script and will not work with a coming version,\MessageBreak that will remove this deprecated code}% \let\scr@t@st@nd@w@rn@m@k@ch@pt@rh@@d\@gobbble \fi \endgroup }{}% } %\else % \let\scr@t@st@nd@w@rn@m@k@ch@pt@rh@@d\@gobble %\fi % \end{macrocode} % \end{macro}^^A \scr@t@st@nd@w@rn@m@k@ch@pt@rh@@d % \end{macro}^^A \scr@@startchapter % % \begin{macro}{\scr@@startschapter} % \changes{v3.18}{2015/05/22}{added} % The macro % \begin{quote} % \cs{scr@@startschapter}\marg{chapter command name}\marg{chapter heading} % \end{quote} % is now part of the style \texttt{chapter}. However, the main parts % of the code are from the original definition of \cs{@schapter}. Therefore it % has the mandatory argument of a star variant of, i.e., \cs{chapter} but an % additional first argument. % \begin{macrocode} \newcommand*{\scr@@startschapter}[2]{% \ExecuteDoHook{heading/branch/star/#1}% % \end{macrocode} % Some users don't learn to use \cs{addchapter} for not numbered parts with % entry to the table of contents but insist in using % \cs{addcontentsline}. Despite this should not be used, because at least % \cs{addchaptertocentry} should be used, we tolerate this by using our % \pkg{hyperref} hook. % \begin{description} % \item[ToDo:] I don't understand why \pkg{hyperref} uses a group here and % locally sets \cs{@mkboth} to \cs{@gobbletwo}. However, I've copied this. % \end{description} % \begin{macrocode} \begingroup \let\@mkboth\@gobbletwo \hy@insteadofrefstepcounter{#1}% \endgroup % \end{macrocode} % Setting the heading itself is more or less a call of \cs{@makes\meta{command % name}head}. % \begin{description} % \item[ToDo:] Using \cs{scr@makeschapterhead}\marg{command name} would be the % better solution. However in this case, every redefinition of % \cs{@makeschapterhead} would be ignored. So currently we support such % deprecated redefinition of internal macro \cs{@makeschapterhead} for % \cs{chapter}. But this will be changed in future. % \end{description} % \begin{macrocode} \scr@t@st@nd@w@rn@m@ks@ch@pt@rh@@d{#1}% \if@twocolumn \if@at@twocolumn \@nameuse{@makes#1head}{#2}% \else \@topnewpage[\@nameuse{@makes#1head}{#2}]% \fi \else \@nameuse{@makes#1head}{#2}% \fi % \end{macrocode} % \changes{v3.18}{2015/05/21}{always using \cs{@afterheading}} % And finally the end of every outline command. % \begin{macrocode} \@afterheading } % \end{macrocode} % \begin{macro}{\scr@t@st@nd@w@rn@m@ks@ch@pt@rh@@d} % \changes{v3.36}{2022/03/16}{added} % The test and warning used inside \cs{scr@@startschapter}. % \begin{macrocode} %\expandafter\ifnum\scr@v@is@ge{3.36}% \newcommand*{\scr@t@st@nd@w@rn@m@ks@ch@pt@rh@@d}[1]{% \Ifstr{#1}{chapter}{% \begingroup \def\reserved@a{\scr@makeschapterhead{chapter}}% \ifx\@makeschapterhead\reserved@a\else \ClassWarningNoLine{\KOMAClassName}{% Redefinition of \string\@makeschapterhead\space detected.\MessageBreak Note: KOMA-Script does use styles for commands like\MessageBreak \string\chapter. Currently it internally still provides and\MessageBreak uses \string\@makeschapterhead, but a completely different\MessageBreak definition compared to the standard classes.\MessageBreak So redefining or using internal \string\@makeschapterhead\MessageBreak by users or package authors may already break\MessageBreak KOMA-Script and will not work with a coming version,\MessageBreak that will remove this deprecated code}% \let\scr@t@st@nd@w@rn@m@ks@ch@pt@rh@@d\@gobble \fi \endgroup }{}% } %\else % \let\scr@t@st@nd@w@rn@m@ks@ch@pt@rh@@d\@gobble %\fi % \end{macrocode} % \end{macro}^^A \scr@t@st@nd@w@rn@m@ks@ch@pt@rh@@d % \end{macro}^^A \scr@@startschapter % %% \begin{macro}{\@at@twocolumntrue,\@at@twocolumnfalse,\if@at@twocolumn} % \changes{v2.7b}{2001/01/05}{added} % \begin{macro}{\scr@topnewpage} % \changes{v2.7b}{2001/01/05}{added} % \changes{v2.8q}{2001/11/27}{braces fixed} % \begin{macro}{\@topnewpage} % \changes{v2.7b}{2001/01/05}{added} % \changes{v2.7g}{2001/04/17}{missing \cs{long} added} % In the code above we use \cs{if@at@twocolumn} to detect, if we already % inside the optional argument of \cs{twocolumn}. A clean definition of this % feature would redefine \LaTeX{} command \cs{twocolumn}. Here we use the ugly % hack to redefine the internal macro \cs{@topnewpage} of the \LaTeX{} kernel % instead. This macro is used to print the optional argument. So we can add % switching on and of the boolean switch before and after it. With this, % packages can simply use chapter commands also inside the optional argument % of \cs{twocolumn} instead of need to use an internal command like % \cs{@makechapterhead}. % \begin{macrocode} \newif\if@at@twocolumn \newcommand*\scr@topnewpage{} \let\scr@topnewpage\@topnewpage \long\def\@topnewpage[#1]{% \@at@twocolumntrue\scr@topnewpage[{#1}]\@at@twocolumnfalse } % \end{macrocode} % \end{macro}^^A \@topnewpage % \end{macro}^^A \scr@topnewpage % \end{macro}^^A \if@at@twocolumn % % \begin{macro}{\scr@makechapterhead} % \changes{v2.7b}{2001/01/05}{support for chapter preamble} % \changes{v2.8p}{2001/09/25}{support for different kinds of preambles} % \changes{v3.15}{2014/12/10}{\cs{nobreak} removed} % \changes{v3.18}{2015/05/22}{added} % \begin{macro}{\scr@@makechapterhead} % \changes{v3.18}{2015/05/22}{added} % \changes{v2.8q}{2002/04/18}{\cs{raggedsection} also for the prefix} % \changes{v2.9p}{2003/06/28}{setting \cs{parfillskip} to \cs{fill}} % \changes{v2.96a}{2006/12/02}{distance after the prefix line only if prefix line} % \changes{v2.97b}{2007/03/09}{\cs{endgraf} fixed} % \changes{v3.15}{2014/11/20}{re-implementation} % \changes{v3.15}{2014/12/09}{\cs{raggedchapter} replaced by \cs{raggedsection}} % \changes{v3.17}{2015/04/03}{using \cs{usefontofkomafont} for initial font % changed} % Macros % \begin{quote}\raggedright % \cs{scr@makechapterhead}\marg{chapter command name}\marg{heading}\\ % \cs{scr@@makechapterhead}\marg{chapter command name}\marg{heading} % \end{quote} % are used inside the definition of style \texttt{chapter} and replace % \cs{@makechapterhead} resp. \cs{@@makechapterhead} there. So they have one % more argument than \cs{@makechapterhead} of the standard classes. % \begin{macrocode} \newcommand*{\scr@makechapterhead}[2]{% \use@chapter@o@preamble{#1}% \@nameuse{@@make#1head}{#2}% \use@preamble{#1@u}% } \newcommand*{\scr@@makechapterhead}[2]{% % \end{macrocode} % \changes{v3.22}{2016/12/21}{\cs{@afterindentrue} if \opt{beforeskip} is % positive} % \changes{v3.26}{2018/09/18}{using \opt{afterindent}} % Depending on \opt{afterindent} we set \cs{if@afterindent} and set the % initial vertical skip using \cs{@tempskipa} and \cs{chapterheadstartvskip}. % \begin{macrocode} \@tempskipa=\glueexpr \csname scr@#1@beforeskip\endcsname\relax\relax \csname scr@#1@afterindent\endcsname {\@afterindenttrue}{\@afterindentfalse}{% \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\else % \expandafter\ifnum\scr@v@is@ge{3.22} \@afterindenttrue % \fi \fi }% \chapterheadstartvskip % \end{macrocode} % \changes{v3.19}{2015/08/02}{using \cs{chapterlinesformat} and % \cs{chapterlineswithprefixformat}} % \changes{v3.19}{2015/08/02}{using font element \fnt{disposition} instead of % \cs{sectfont}} % \changes{v3.19a}{2015/10/03}{missing local definition of \cs{IfUseNumber} % added} % \changes{v3.20}{2015/12/23}{setting \cs{parfillskip} to \texttt{\cs{z@} plus % 1fil}} % \changes{v3.27}{2019/02/02}{setting of \cs{parindent} and \cs{parfillskip} % moved} % \changes{v3.27}{2019/02/02}{\cs{ExecuteDoHook} added} % \changes{v3.28}{2019/11/19}{\cs{ifnumbered} renamed to % \cs{Ifnumbered}} % For the heading itself a group is used. Using group braces instead of % \cs{begingroup} makes it possible to do a very ugly hack inside a % redefinition of \cs{chapterheadstartvskip}. Nevertheless, such hacks are not % recommended. % \begin{macrocode} {% \def\IfUseNumber{\Ifnumbered{#1}}% % \if@mainmatter\else\let\IfUseNumber\@secondoftwo\fi \ExecuteDoHook{heading/begingroup/#1}% \if@chapterprefix \let\IfUsePrefixLine\@firstoftwo \else \let\IfUsePrefixLine\@secondoftwo \fi \setlength{\parindent}{\z@}\setlength{\parfillskip}{\z@ plus 1fil}% \normalfont\usekomafont{disposition}{% \usekomafont{#1}{% \settoheight{\@tempskipa}{% {\usekomafont{#1prefix}{% \vrule \@width\z@ \@height\csname scr@#1@innerskip\endcsname}}% }% \raggedchapter \IfUseNumber{% \IfUsePrefixLine{% \chapterlineswithprefixformat{#1}% {{\usekomafont{#1prefix}{\csname #1format\endcsname% \setlength{\@tempskipa}{\csname scr@#1@innerskip\endcsname}% \chapterheadmidvskip}}}% {\interlinepenalty \@M#2\@@par}% }{% \chapterlinesformat{#1}% {\csname #1format\endcsname}% {\interlinepenalty \@M#2\@@par}% }% }{% \IfUsePrefixLine{% \chapterlineswithprefixformat{#1}% {}% {\interlinepenalty \@M#2\@@par}% }{% \chapterlinesformat{#1}% {}% {\interlinepenalty \@M#2\@@par}% }% }% }% }% \ExecuteDoHook{heading/endgroup/#1}% }% \nobreak\par\nobreak % \end{macrocode} % \changes{v3.26}{2018/09/20}{no absolute value} % Last but not least the final skip. % \begin{description} % \item[Note:] \cs{@afterheading} will be added by \cs{scr@@startchapter}. % \end{description} % \begin{macrocode} \@tempskipa=\glueexpr \csname scr@#1@afterskip\endcsname\relax\relax \chapterheadendvskip } % \end{macrocode} % \end{macro}^^A \scr@makechapterhead % \end{macro}^^A \scr@@makechapterhead % % \begin{macro}{\scr@makeschapterhead} % \changes{v3.18}{2015/05/22}{added} % \begin{macro}{\scr@@makeschapterhead} % \changes{v2.9p}{2003/06/28}{to \cs{parfillskip} to \cs{fill}} % \changes{v2.9q}{2004/03/24}{same braces like \cs{@@makechapterhead}} % \changes{v3.15}{2014/12/09}{\cs{raggedchapter} replaced by % \cs{raggedsection}} % \changes{v3.18}{2015/05/22}{added} % \changes{v3.19}{2015/08/02}{same changes like \cs{scr@@makechapterhead}} % \changes{v3.20}{2015/12/23}{setting \cs{parfillskip} to \texttt{\cs{z@} plus % 1fil}} % \changes{v3.25}{2017/09/07}{\cs{IfUseNumber} fixed} % \changes{v3.26}{2018/09/20}{no absolute of \opt{afterskip}} % Macros % \begin{quote}\raggedright % \cs{scr@makeschapterhead}\marg{chapter command name}\marg{heading}\\ % \cs{scr@@makeschapterhead}\marg{chapter command name}\marg{heading} % \end{quote} % are used inside the definition of style \texttt{chapter} and replace % \cs{@makeschapterhead} resp. \cs{@@makeschapterhead} there. So they have one % more argument than \cs{@makeschapterhead} of the standard classes. % \begin{macrocode} \newcommand*{\scr@makeschapterhead}[2]{% \use@chapter@o@preamble{#1}% \@nameuse{@@makes#1head}{#2}% \use@preamble{#1@u}% } \newcommand*{\scr@@makeschapterhead}[2]{% % \end{macrocode} % \changes{v3.22}{2016/12/21}{\cs{@afterindentrue} if positive % \opt{beforeskip}} % \changes{v3.26}{2018/09/18}{supporting \opt{afterindent}} % This is a simplified version of \cs{scr@@makechapterhead}. % \begin{macrocode} \@tempskipa=\glueexpr \csname scr@#1@beforeskip\endcsname\relax\relax \csname scr@#1@afterindent\endcsname {\@afterindenttrue}{\@afterindentfalse}{% \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\else % \expandafter\ifnum\scr@v@is@ge{3.22} \@afterindenttrue % \fi \fi }% \chapterheadstartvskip {% \let\IfUseNumber\@secondoftwo \ExecuteDoHook{heading/begingroup/#1}% \if@chapterprefix \let\IfUsePrefixLine\@firstoftwo \else \let\IfUsePrefixLine\@secondoftwo \fi \setlength{\parindent}{\z@}\setlength{\parfillskip}{\z@ plus 1fil}% \normalfont\usekomafont{disposition}{% \usekomafont{#1}{% \raggedchapter \IfUsePrefixLine{% \chapterlineswithprefixformat{#1}% {}% {\interlinepenalty \@M#2\@@par}% }{% \chapterlinesformat{#1}% {}% {\interlinepenalty \@M#2\@@par}% }% }% }% \ExecuteDoHook{heading/endgroup/#1}% }% \nobreak\par\nobreak \@tempskipa=\glueexpr \csname scr@#1@afterskip\endcsname\relax\relax \chapterheadendvskip } % \end{macrocode} % \end{macro}^^A \scr@@makeschapterhead % \end{macro}^^A \scr@makeschapterhead % % \begin{command}{\chapterlinesformat,\chapterlineswithprefixformat} % \changes{v3.19}{2015/08/02}{added} % Commands % \begin{quote}\raggedright % \cs{chapterlinesformat}\marg{command name}\marg{number}\marg{text}\\ % \cs{chapterlineswithprefixformat}\marg{command name}\marg{number}\marg{text} % \end{quote} % are used to print a chapter heading either a free standing one or a free % stranding one with prefix line. \meta{number} is the completely formatted % prefix line inclusive the vertical distance below. The \meta{text} is the % text of the heading also formatted and with final \cs{@@par}. But if the % user used more paragraphs than this is final one, the user is responsible to % prevent page breaks! % \begin{macrocode} \newcommand{\chapterlinesformat}[3]{% \@hangfrom{#2}{#3}% } \newcommand{\chapterlineswithprefixformat}[3]{% #2#3% } % \end{macrocode} % \end{command}^^A \chapterlinesformat,\chapterlineswithprefixformat % % \begin{macro}{\use@chapter@o@preamble} % \changes{v3.15}{2014/12/08}{distances adapted} % \changes{v3.15a}{2015/02/02}{avoiding \texttt{overfull \cs{vbox}}} % \changes{v3.18}{2015/05/20}{using command depending distances and warnings} % \changes{v3.18}{2015/05/22}{has an argument and prints the preamble of the % command instead of the style} % Used by \cs{scr@makechapterhead} and \cs{scr@makeschapterhead} to set the % preamble above chapter headings. % \begin{macrocode} \newcommand*{\use@chapter@o@preamble}[1]{% {% \settoheight{\@tempdima}{% \@tempskipa=\glueexpr \csname scr@#1@beforeskip\endcsname\relax\relax \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\fi \vbox{\chapterheadstartvskip}% }% \settodepth{\@tempdimb}{% \@tempskipa=\glueexpr \csname scr@#1@beforeskip\endcsname\relax\relax \ifdim\@tempskipa<\z@\@tempskipa-\@tempskipa\fi \vbox{\chapterheadstartvskip}% }% \addtolength{\@tempdima}{\@tempdimb}% \setbox\z@\vbox{% \use@preamble{#1@o}% }% \setlength{\@tempdimb}{\ht0}% \addtolength{\@tempdimb}{\dp0}% \vbox to \z@{% \vskip-\baselineskip \vbox to \@tempdima{% \vfill \box\z@ }% \vss }\vskip-\parskip\vskip-\baselineskip \ifdim \@tempdimb>\@tempdima% \addtolength{\@tempdimb}{-\@tempdima}% \ifdim\@tempdimb<\vfuzz \ClassInfo{\KOMAClassName}{% preamble before #1 is \the\@tempdimb\space to high.\MessageBreak Tolerated without warning because of\MessageBreak \string\vfuzz\space = \the\vfuzz\space >= \the\@tempdimb }% \else \ClassWarning{\KOMAClassName}{% preamble before #1 is \the\@tempdimb\space to high.\MessageBreak To avoid the overfull \string\vbox\space you may change\MessageBreak the `beforeskip' value using \string\RedeclareSectionCommand\MessageBreak at the preamble of your document.\MessageBreak You may also change \string\setchapterpreamble\MessageBreak before the command, which generates the message about\MessageBreak an overfull \string\vbox }% \fi \fi% }% } % \end{macrocode} % \end{macro}^^A \use@chapter@o@preamble % \end{macro}^^A \scr@startchapter % % \begin{command}{\addchaptertocentry} % \changes{v3.08}{2010/11/01}{added} % \changes{v3.12}{2013/09/24}{support for \cs{if@chaptertolists}} % \changes{v3.12}{2013/09/24}{using\cs{addxcontentsline}} % \changes{v3.28}{2019/11/19}{\cs{iftocfeature} replaced by % \cs{Iftocfeature}} % We do not use \cs{addcontentsline} directly for the entries to the table of % contents. Using % \begin{quote} % \cs{addchaptertocentry}\marg{number}\marg{text} % \end{quote} % allows easy manipulation of such entries and additional actions. If the % \meta{number} is completely empty no number should be used. Internally the % generic \cs{addtocentrydefault} it used, which uses \cs{nonumberline} % instead of \cs{numberline} in this case. See \file{scrkernel-listsof.dtx} % for more information. % \begin{description} % \item[ToDo:] Here we also do the entries to other directories. But we have % also code for this in \cs{scr@@startchapter} at least for the vertical % space. Shouldn't we combine both places to one place? And shouldn't this % be done here only, because of handling of user calls of % \cs{addchaptertocentry}? % \end{description} % \begin{macrocode} \newcommand*{\addchaptertocentry}[2]{% \addtocentrydefault{chapter}{#1}{#2}% \if@chaptertolists \doforeachtocfile{% \Iftocfeature{\@currext}{chapteratlist}{% \addxcontentsline{\@currext}{chapteratlist}[{#1}]{#2}% }{}% }% \@ifundefined{float@addtolists}{}{\scr@float@addtolists@warning}% \fi } % \end{macrocode} % \end{command}^^A \addchaptertocentry % % \begin{macro}{\@chapter,\@makechapterhead,\@@makechapterhead, % \@schapter,\@makeschapterhead,\@@makeschapterhead} % \changes{v3.18}{2015/05/22}{indirect by \cs{DeclareSectionCommand}} % \begin{command}{\setchapterpreamble} % \changes{v2.7b}{2001/01/05}{added} % \changes{v3.18}{2015/05/22}{indirect by \cs{DeclareSectionCommand}} % \begin{macro}{\chapter@u@preamble,\chapter@o@preamble} % \changes{v2.8p}{2001/09/25}{added} % \changes{v3.18}{2015/05/22}{indirect by \cs{DeclareSectionCommand}} % All these commands and macros are not defined explicitly but by using % \cs{DeclareSectionCommand} later. See also % \cs{scr@dsc@def@style@chapter@command} and \cs{setchapterpreamble}. % \end{macro}^^A \chapter@u@preamble,\chapter@o@preamble % \end{command}^^A \setchapterpreamble % \end{macro}^^A \@chapter … \@@makeschapterhead % % \begin{command}{\addchap} % \changes{v2.0e}{1994/08/10}{\cs{sectdef} replaced by h \cs{secdef}} % \changes{v2.0e}{1994/08/10}{\cs{addcontensline} replaced by % \cs{addcontentsline}} % \changes{v2.0e}{1994/08/10}{\cs{@makechapterhead} replaced by % \cs{@makeschapterhead}} % \changes{v2.0e}{1994/08/10}{\cs{afterheadings} replaced by % \cs{@afterheading}} % \changes{v2.1a}{1994/10/29}{argument of \cs{chaptermark} removed from % \cls*{scrbook}} % \changes{v2.0e}{1994/10/12}{several \cs{markboth} replaced by % \cs{sectionmark}} % \changes{v2.2b}{1995/03/20}{several \cs{chaptermark} replaced by % \cs{@mkboth}} % \changes{v2.8d}{2001/07/05}{using \cs{chapterpagestyle}} % \changes{v3.08}{2010/11/01}{using \cs{addchaptertocentry}} % \changes{v3.10}{2011/08/30}{extended optional argument} % \changes{v3.13a}{2014/09/11}{using \cs{SecDef}} % \changes{v3.18}{2015/05/22}{redefinition} % \begin{macro}{\@addchap} % \changes{v3.12}{2013/02/26}{using \cs{addchapmark}} % \changes{v3.17}{2015/04/20}{expanding \cs{scr@ds@head} in \cs{addchapmark}} % \changes{v3.18}{2015/05/22}{redefinition} % \begin{macro}{\@saddchap} % \changes{v3.12}{2013/02/26}{using \cs{addchapmark}} % \changes{v3.18}{2015/05/22}{redefinition} % Since \KOMAScript{} 3.18 using % \begin{quote} % \cs{addchap}\oarg{head or ToC entry}\marg{heading} % \end{quote} % is very similar to % |\chapter[nonumber=true,…]{…}| but also works if the extended optional % argument is not activated. And % \begin{quote} % \cs{addchap*}\marg{heading} % \end{quote} % is just a \cs{chapter*}\marg{heading} with additional |\addchapmark{}| to % empty the running head. % \begin{description} % \item[Note:] Because of simply manipulating \cnt{secnumdepth} this should % also work with packages like \pkg{hyperref} as long as they support % chapters without numbering. % \end{description} % \begin{macrocode} \newcommand\addchap{% \SecDef\@addchap\@saddchap }% \newcommand*{\@addchap}{}% \long\def\@addchap[#1]#2{% \edef\reserved@a{% \unexpanded{% \chapter[{#1}]{#2}% \c@secnumdepth= }\the\c@secnumdepth\relax }% \c@secnumdepth=\numexpr \chapternumdepth-1\relax \reserved@a } \newcommand{\@saddchap}[1]{% \chapter*{#1}% \addchapmark{}% }% % \end{macrocode} % \changes{v2.7e}{2001/04/16}{braces fixed} % \changes{v2.7f}{2001/04/17}{braces fixed} % \changes{v2.8q}{2001/11/17}{using \cs{AfterPackage} to test for % \pkg{hyperref} version} % \changes{v3.27a}{2019/11/11}{warning fixed} % \begin{description} % \item[ToDo:] Unfortunately \pkg{hyperref} until version 6.71a has a big fat % bug. It redefines the internal \KOMAScript{} macro \cs{@addchap} without % testing the definition. From version 6.71b this is done only, if a very % old \KOMAScript{} is used. However, I would prefer removing all such code % from \pkg{hyperref}. Currently we warn, if such an old \pkg{hyperref} is % used. But this will be removed in future. % \end{description} % \begin{macrocode} %<*book> \AfterPackage{hyperref}{% \@ifpackagelater{hyperref}{2001/02/19}{}{% \ClassWarningNoLine{\KOMAClassName}{% You are using an old version of the hyperref package!\MessageBreak% This version has a buggy hack in many drivers,\MessageBreak% causing \string\addchap\space to behave strangely.\MessageBreak% Please update hyperref to at least version 6.71b% }% }% } % % % \end{macrocode} % \end{macro}^^A \@saddchap % \end{macro}^^A \@addchap % \end{command}^^A \addchap % % % \begin{macro}{\l@chapter} % \changes{v2.9k}{2003/01/02}{supporting option \opt{tocleft}} % \changes{v2.96b}{2006/11/30}{prevent page break between chapter entry and % parent} % \changes{v2.96b}{2006/11/30}{prevent page break between chapter entry and % child} % \changes{v2.97c}{2007/06/21}{\cs{sectfont} replaced by font element % \fnt{chapterentry}} % \changes{v2.97c}{2007/06/21}{using font element % \fnt{chapterentrypagenumber}} % \changes{v2.97c}{2007/06/21}{re-implemented to support left aligned entries} % \changes{v3.15}{2014/12/22}{using \cs{chaptertocdepth} and % \cs{scr@chapter@tocnumwidth}} % \changes{v3.15}{2014/12/10}{initial skip with \cs{addvspace} instead of % \cs{vskip}} % \changes{v3.20}{2015/10/06}{re-implemented using ToC styles} % \begin{macro}{\scr@chapter@tocindent} % \changes{v3.15}{2014/12/02}{added} % \changes{v3.18}{2015/05/20}{indirect definition by \cs{DeclareSectionCommand}} % \changes{v3.20}{2015/11/06}{really used} % \end{macro}^^A \scr@chapter@tocindent % \begin{macro}{\scr@chapter@tocnumwidth} % \changes{v3.15}{2014/12/02}{added} % \changes{v3.18}{2015/05/20}{indirect definition by \cs{DeclareSectionCommand}} % \end{macro} % \begin{option}{chapterentrydots} % \changes{v3.15}{2014/12/10}{added} % Option % \begin{quote} % \opt{chapterentrydots=\meta{boolean}} % \end{quote} % is the main difference of ToC entry style \texttt{chapter} to ToC entry % style \texttt{tocline}. It activates the dots between the entry text and the % page number. % \begin{description} % \item[ToDo:] This should be moved to \file{scrkernel-tocstyle.dtx}. % \end{description} % \begin{macrocode} %<*option> \KOMA@ifkey{chapterentrydots}{@chapterentrywithdots} % % \end{macrocode} % \end{option}^^A chapterentrydots % \begin{command}{\raggedchapterentry} % \changes{v2.97c}{2007/06/21}{added} % \changes{v3.20}{2016/02/23}{removed} % \changes{v3.21}{2016/06/06}{see \file{scrkernel-tocstyle.dtx}, % style \texttt{tocline}, option \opt{raggedentrytext}} % The initial setting of option \opt{raggedtext} of chapter ToC entry style % \texttt{tocline} resp. \texttt{chapter}. % \begin{description} % \item[ToDo:] Do we really need this definition? Every definition but % \cs{raggedright} results in justified text. So not defining it would be % almost the same. It just would not reserve the macro. But this could be % done in \file{scrkernel-tocstyle.dtx}. % \end{description} % \begin{macrocode} %<*body> \newcommand*{\raggedchapterentry}{} % \end{macrocode} % \end{command}^^A \raggedchapterentry % \end{macro}^^A \l@chapter % % \begin{macro}{\l@chapteratlist} % \changes{v2.96a}{2006/12/03}{added} % This is used for chapter entries to other directories by the table of % contents. By default it uses \cs{l@chapter}. But users can redefine it % using, i.e., \cs{DeclareTOCStyleEntry}. However in this case they have to % setup all the attributes/options on their own. % \begin{macrocode} \newcommand*{\l@chapteratlist}{\l@chapter} % \end{macrocode} % \end{macro}^^A \l@chapteratlist % % \begin{counter}{chapter} % \begin{command}{\thechapter} % \begin{command}{\chapterformat} % \changes{v2.3c}{1995/08/06}{auto dot feature} % \changes{v2.7}{2000/01/03}{white space replaced by \cs{enskip}} % \changes{v2.8}{2001/06/15}{\cs{chapappifprefix} added} % \changes{v2.8o}{2001/09/19}{\cs{chapappifprefix} replaced by % \cs{chapappifchapterprefix}} % \changes{v2.96a}{2006/12/02}{\cs{mbox} added} % \changes{v3.17}{2015/03/08}{\cs{enskip} not in prefix line mode} % \begin{command}{\chaptermarkformat} % \changes{v2.3a}{1995/07/08}{space after chapter number increased} % \changes{v2.3c}{1995/08/06}{auto dot feature} % \changes{v2.8}{2001/06/15}{\cs{chapappifprefix} added} % \changes{v2.8o}{2001/09/19}{\cs{chapappifprefix} replaced by % \cs{chapappifchapterprefix}} % \changes{v3.03a}{2009/04/03}{tilde replaced by \cs{nobreakspace} for better % \pkg{babel-spanish} support} % The counter would also be defined by \cs{DeclareSectionCommand}. But because % of handling \cs{frontmatter} and \cs{backmatter} and prefix lines we cannot % use the default definition of the formatting. So we define it already before % calling \cs{DeclareSectionCommand} for \cs{chapter}. % \begin{macrocode} \newcounter{chapter} \renewcommand*{\thechapter}{\@arabic\c@chapter} \newcommand*{\chapterformat}{% \mbox{\chapappifchapterprefix{\nobreakspace}\thechapter\autodot \IfUsePrefixLine{}{\enskip}}% } \newcommand*\chaptermarkformat{\chapappifchapterprefix{\ }% \thechapter\autodot\enskip} % \end{macrocode} % \end{command}^^A \chaptermarkformat % \end{command}^^A \chapterformat % \end{command}^^A \thechapter % \end{counter}^^A chapter % % % \begin{command}{\chaptername} % \changes{v3.36}{2022/03/15}{explicit definition for English languages} % The name of a chapter, e.g., used for the prefix line and maybe for the ToC % entry. % \begin{macrocode} \newcommand*\chaptername{Chapter} \providecaptionname{american,australian,british,canadian,english,newzealand,% UKenglish,ukenglish,USenglish,usenglish}\chaptername{Chapter} % \end{macrocode} % \end{command}^^A \chaptername % % % \begin{command}{\appendixname} % \changes{v3.36}{2022/03/15}{explicit definition for English languages} % The same for appendix chapters. % \begin{macrocode} \newcommand*\appendixname{Appendix} \providecaptionname{american,australian,british,canadian,english,newzealand,% UKenglish,ukenglish,USenglish,usenglish}\appendixname{Appendix} % \end{macrocode} % \end{command}^^A \appendixname % % % \begin{command}{\chapappifprefix} % \changes{v2.8}{2001/06/15}{added} % \changes{v2.8o}{2001/09/19}{deprecated} % \changes{v3.36}{2022/03/18}{removed} % \begin{description} % \item[Note:] Command \cs{chapappifprefix} has been removed in \KOMAScript{} % v3.36, because it is deprecated from \KOMAScript{} v2.8o and there never has % been a compatibility switch for versions before \KOMAScript{} v2.9. % \end{description} % \end{command}^^A \chapappifprefix % % % \begin{command}{\chapappifchapterprefix} % \changes{v2.8o}{2001/09/19}{added} % \changes{v3.18}{2015/06/09}{using \cs{IfChapterUsePrefixLine}} % \begin{command}{\IfChapterUsesPrefixLine} % \changes{v3.18}{2015/06/09}{added} % \begin{command}{\chapapp} % \changes{v2.8}{2001/06/15}{added} % \begin{macro}{\@chapapp} % The \LaTeX{} standard classes provide an internal macro \cs{@chapapp} that % is either \cs{chaptername} or \cs{appendixname} depending on whether we are % inside or outside the appendix. For compatibility with lots of packages % \KOMAScript{} does provide this too. But for the user level this is % cumbersome. So \KOMAScript{} does also provide a \emph{read only specified} % user command \cs{chapapp}. \KOMAScript{} itself uses \cs{chapapp} inside % \begin{quote} % \cs{chapappifchapterprefix}\marg{then string} % \end{quote} % that outputs \cs{then string} prefixed by \cs{chapapp} only, if % \opt{chapterprefix} (resp. \opt{headings=twolinechapter}) has been activated % and therefore a chapter prefix line has to be used. A more general version % \cs{chapterifchapterprefix} is % \begin{quote} % \cs{IfChapterUsesPrefixLine}\marg{then code}\marg{else code} % \end{quote} % that executes \cs{then code} if a chapter prefix line has to be used and % \cs{else code} otherwise (both without extra prefix). % \begin{macrocode} \newcommand*{\chapappifchapterprefix}[1]{% \IfChapterUsesPrefixLine{\chapapp#1}{}% } \newcommand*{\IfChapterUsesPrefixLine}{% \if@chapterprefix\expandafter\@firstoftwo\else\expandafter\@secondoftwo\fi } \newcommand*{\chapapp}{\@chapapp} \newcommand*\@chapapp{\chaptername} % \end{macrocode} % \end{macro}^^A \@chapapp % \end{command}^^A \chapapp % \end{command}^^A \IfChapterUsePrefixLine % \end{command}^^A \chapappifchapterprefix % % % \begin{command}{\chaptermark} % Before selecting a page style with automatic running head, \cs{chapter} % should simply not change the left or right mark. % \begin{description} % \item[ToDo:] Do we really need this or would the later % \cs{DeclareSectionCommand} be enough to do the initial definition? % \end{description} % \begin{macrocode} \newcommand*\chaptermark[1]{} % \end{macrocode} % \end{command} % % \begin{command}{\addchapmark} % \changes{v3.12}{2013/03/26}{added} % \cs{addchap} and marks for running heads are a little bit more % complicated. Currently we are using a local redefinition of % \cs{if@mainmatter} and setting of \cnt{secnumdept} to switch of numbering % and then using \cs{chaptermark}. So the \cs{chaptermark} definition should % always respect at least one of these settings. % \begin{description} % \item[Note:] The ToDo note at \cs{chaptermark} is not relevant for this % definition. % \end{description} % \begin{macrocode} \newcommand*\addchapmark[1]{% \begingroup \expandafter\let\csname if@mainmatter\expandafter\endcsname \csname iffalse\endcsname \c@secnumdepth=\numexpr \chapternumdepth-1\relax \chaptermark{#1}% \endgroup } % \end{macrocode} % \end{command}^^A \addchapmark % % % \begin{command}{\raggedchapter} % \changes{v3.15}{2014/12/09}{added} % Style \texttt{chapter} does not use \cs{raggedsection} but % \cs{raggedchapter}. However, the initial value is \cs{raggedsection}, so a % change of \cs{raggedsection} would also change the initial behave of % \cs{raggedchapter}. Nevertheless the alignment of chapters in independent % from the alignment of sections, if wanted. % \begin{macrocode} \newcommand*{\raggedchapter}{\raggedsection} % \end{macrocode} % \end{command} % % % \begin{fontelement}{chapterentry} % \changes{v2.97c}{2007/06/21}{added} % \changes{v3.06}{2010/06/09}{font element \fnt{sectioning} replaced by % \fnt{disposition}} % \cs{chapter} entries to the table of contents initially using % \fnt{disposition}, the basic font of all outlines. % \begin{macrocode} \newkomafont{chapterentry}{\usekomafont{disposition}} % \end{macrocode} % \end{fontelement} % % \begin{fontelement}{chapterentrypagenumber} % \changes{v2.97c}{2007/06/21}{added} % The page number of \cs{chapter} entries to the table of contents is % initially the same as the entry at whole. % \begin{macrocode} \newkomafont{chapterentrypagenumber}{} % \end{macrocode} % \end{fontelement} % % \begin{fontelement}{chapterentrydots} % \changes{v3.15}{2014/12/10}{added} % \changes{v3.27}{2019/10/28}{\cs{normalfont} removed} % If the optional dots for \cs{chapter} entries to the table of contents are % used, we can change the font of the dots also. It is used for the % \texttt{linefill} of \pkg*{tocbasic} ToC entry style \texttt{chapter}, that % uses ToC entry style \texttt{tocline} where the line filler is always % prefixed by \cs{normalfont}\cs{normalsize}. So the setting is relative to % this. The color is relative to the color of \fnt{chapterentry}. % \begin{macrocode} \newkomafont{chapterentrydots}{} % % % \end{macrocode} % \end{fontelement} % % % \subsection{Section, subsections and more} % % The outline levels of sections, subsections, subsubsection, paragraphs and % subparagraphs are all very similar. There are only some special treatments % of sections with \cls*{scrartcl}, because there \cs{section} is a high-level % command. % % \begin{fontelement}{section,subsection,subsubsection, % paragraph,subparagraph} % \changes{v2.8o}{2001/09/14}{added} % Definition of the font elements used by \cs{section}, \cs{subsection}, % \cs{subsubsection}, \cs{paragraph} and \cs{subparagraph}. The settings are % done by option \texttt{headings} later. Everything is prepared before this % option is used the first time. The definition of the font element is done % manually to stay compatible with old \KOMAScript{} versions using another % internal macro than the default of \cs{newkomafont}. % \begin{macrocode} %<*prepare> \newcommand*{\size@section}{} \newcommand*{\scr@fnt@section}{\size@section} \newcommand*{\size@subsection}{} \newcommand*{\scr@fnt@subsection}{\size@subsection} \newcommand*{\size@subsubsection}{} \newcommand*{\scr@fnt@subsubsection}{\size@subsubsection} \newcommand*{\size@paragraph}{} \newcommand*{\scr@fnt@paragraph}{\size@paragraph} \newcommand*{\size@subparagraph}{} \newcommand*{\scr@fnt@subparagraph}{\size@subparagraph} % % \end{macrocode} % \end{fontelement}^^A section … subparagraph % % % \begin{macro}{\l@section} % \changes{v2.9k}{2003/01/02}{supporting option \opt{tocleft}} % \changes{v2.96b}{2006/11/30}{preventing page break between section entry and % parent} % \changes{v2.96b}{2006/11/30}{preventing page break between section entry and % child} % \changes{v2.97c}{2007/06/21}{\cs{sectfont} replaced by font element % \fnt{sectionentry}} % \changes{v2.97c}{2007/06/21}{using font element % \fnt{sectionentrypagenumber}} % \changes{v2.97c}{2007/06/21}{re-implemented to support left aligned entries} % \changes{v3.15}{2014/11/24}{using \cs{sectiontocdepth}, % \cs{scr@section@tocindent} and \cs{scr@section@tocnumwidth}} % \changes{v3.20}{2015/10/06}{re-implemented using ToC styles} % \begin{option}{sectionentrydots} % \changes{v3.15}{2014/12/10}{added} % With \cls*{scrartcl} option % \begin{quote} % \opt{sectionentrydots=\meta{boolean}} % \end{quote} % is the main difference of ToC entry style \texttt{section} to ToC entry % style \texttt{tocline}. It activates the dots between the entry text and the % page number. % \begin{description} % \item[ToDo:] This should be moved to \file{scrkernel-tocstyle.dtx}. % \end{description} % \begin{macrocode} %<*article> %<*option> \KOMA@ifkey{sectionentrydots}{@sectionentrywithdots} % % \end{macrocode} % \end{option}^^A sectionentrydots % \begin{command}{\raggedsectionentry} % \changes{v2.97c}{2007/06/21}{added} % \changes{v3.20}{2016/02/23}{removed} % The initial setting of option \opt{raggedtext} of section ToC entry style % \texttt{tocline} resp. \texttt{section}. % \begin{description} % \item[ToDo:] Do we really need this definition? Every definition but % \cs{raggedright} results in justified text. So not defining it would be % almost the same. It just would not reserve the macro. But this could be % done in \file{scrkernel-tocstyle.dtx}. % \end{description} % \begin{macrocode} %<*body> \newcommand*{\raggedsectionentry}{} % %

% \end{macrocode} % \end{command}^^A \raggedsectionentry % \end{macro}^^A \l@section % % % \begin{command}{\addsec} % \changes{v2.0e}{1994/10/12}{several \cs{markboth} replaced by % \cs{sectionmark}} % \changes{v2.2b}{1995/03/20}{\cs{sectionmark} replaced by \cs{@mkboth}} % \changes{v2.3h}{1995/01/21}{also available with \cls*{scrbook} and % \cls*{scrreprt}} % \changes{v2.4g}{1996/11/04}{\cs{section*} moved because of page breaks in % the table of contents} % \changes{v2.5d}{1998/01/03}{\cs{@mkboth} replaced by conditional % \cs{markright}} % \changes{v2.7a}{2001/01/04}{supporting \pkg{hyperref}} % \changes{v3.13a}{2014/09/11}{using \cs{SecDef}} % \begin{macro}{\@addsec} % \changes{v3.10}{2011/08/30}{using \cs{addsectiontocentry}} % \changes{v3.10}{2011/08/30}{extended optional argument} % \changes{v3.12}{2013/02/26}{using \cs{addsecmark}} % \changes{v3.18}{2015/05/22}{redefinition} % \begin{macro}{\@saddsec} % \changes{v3.12}{2013/02/26}{using \cs{addsecmark}} % \changes{v3.17}{2015/04/20}{expanding \cs{scr@ds@head} in \cs{addsecmark}} % Since \KOMAScript{} 3.18 using % \begin{quote} % \cs{addsec}\oarg{head or ToC entry}\marg{heading} % \end{quote} % is very similar to % |\section[nonumber=true,…]{…}| but also works if the extended optional % argument is not activated. And % \begin{quote} % \cs{addsec*}\marg{heading} % \end{quote} % is just a \cs{section*}\marg{heading} with additional |\addsecmark{}| to % empty the running head. % \begin{description} % \item[Note:] Because of simply manipulating \cnt{secnumdepth} this should % also work with packages like \pkg{hyperref} as long as they support % sections without numbering. % \end{description} % \begin{macrocode} %<*body> \newcommand\addsec{\SecDef\@addsec\@saddsec} \newcommand*{\@addsec}{} \def\@addsec[#1]#2{% \edef\reserved@a{% \unexpanded{% \section[{#1}]{#2}% \c@secnumdepth= }\the\c@secnumdepth\relax }% \c@secnumdepth=\numexpr \sectionnumdepth-1\relax \reserved@a } \newcommand*{\@saddsec}[1]{% \section*{#1}\addsecmark{}% } % \end{macrocode} % \end{macro}^^A \@saddsec % \end{macro}^^A \@addsec % \end{command}^^A \addsec % % % \begin{command}{\minisec} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} after \cs{sectfont} added} % \changes{v2.9o}{2003/01/31}{\cs{nobreak} after group end} % \changes{v2.96a}{2006/11/30}{initial value of \cs{parfillskip} depending on % \opt{version}} % \changes{v2.96a}{2006/12/03}{not needed \cs{nobreak} removed} % \changes{v3.13a}{2014/08/07}{handling of distances of immediate following % headings like \cs{@startsection}} % \changes{v3.26}{2018/05/14}{missing \cs{interlinepenalty}\cs{@M} added} % \begin{fontelement}{minisec} % \changes{v2.8o}{2001/09/14}{using font element \fnt{minisec}} % \changes{v3.21}{2016/06/12}{missing \cs{nobreak} added} % \cs{minisec} is a very special additional outline of \KOMAScript. It is % always free standing but without numbering. Something like % \cs{sectionlinesformat} is not supported currently. Also entries to the % table of contents or marks for an automatic running head are not % supported. However a dedicated font element is provided. % \begin{macrocode} \newkomafont{minisec}{} \newcommand\minisec[1]{% % \expandafter\ifnum\scr@v@is@lt{3.13a}\relax % \@afterindentfalse \vskip 1.5ex % \else \if@noskipsec \leavevmode \fi \par \@afterindentfalse \if@nobreak \everypar{}% \else \addpenalty\@secpenalty\addvspace{1.5ex}% \fi % \fi {\parindent \z@ % \expandafter\ifnum\scr@v@is@gt{2.96}\relax \setlength{\parfillskip}{\z@ plus 1fil}% % \fi \raggedsection\normalfont\sectfont\nobreak \usekomafont{minisec}{\nobreak\interlinepenalty \@M #1\par\nobreak}% }\nobreak \@afterheading } % \end{macrocode} % \end{fontelement}^^A minisec % \end{command}^^A \minisec % % % \begin{command}{\addsectiontocentry,\addsubsectiontocentry, % \addsubsubsectiontocentry, % \addparagraphtocentry,\addsubparagraphtocentry} % \changes{v3.10}{2011/08/30}{added} % We do not use \cs{addcontentsline} directly for the entries to the table of % contents. Using % \begin{quote}\raggedright % \cs{addsectiontocentry}\marg{number}\marg{text}\\ % \cs{addsubsectiontocentry}\marg{number}\marg{text}\\ % \cs{addsubsubsectiontocentry}\marg{number}\marg{text}\\ % \cs{addparagraphtocentry}\marg{number}\marg{text}\\ % \cs{addsubparagraphtocentry}\marg{number}\marg{text}\\ % \end{quote} % allows easy manipulation of such entries and additional actions. If the % \meta{number} is completely empty no number should be used. Internally the % generic \cs{addtocentrydefault} it used, which uses \cs{nonumberline} % instead of \cs{numberline} in this case. See \file{scrkernel-listsof.dtx} % for more information. % \begin{description} % \item[ToDo:] Should this be moved to \file{scrkernel-listsof.dtx} or even to % \file{scrkernel-tocstyle.dtx}? % \item[ToDo:] Are these really needed or would the implicit definition by the % later \cs{DeclareSectionCommand} be enough as it is already used for % \cs{addsubsubsectiontocentry}? % \end{description} % \begin{macrocode} \newcommand*{\addsectiontocentry}[2]{% \addtocentrydefault{section}{#1}{#2}% } \newcommand*{\addsubsectiontocentry}[2]{% \addtocentrydefault{subsection}{#1}{#2}% } \newcommand*{\addparagraphtocentry}[2]{% \addtocentrydefault{paragraph}{#1}{#2}% } \newcommand*{\addsubparagraphtocentry}[2]{% \addtocentrydefault{subparagraph}{#1}{#2}% } % \end{macrocode} % \end{command} % % % \begin{counter}{section} % \begin{command}{\thesection} % \changes{v2.97e}{2007/11/23}{chapter number prefix only in main matter} % \changes{v3.03b}{2009/06/09}{\cs{relax} replaced by white space for better % support of \pkg{hyperref}} % \changes{v3.27}{2019/06/26}{using \cs{scr@v@is@gt}} % \begin{command}{\sectionmarkformat} % \changes{v2.3a}{1995/07/08}{space after number increased} % \changes{v2.3c}{1995/08/06}{auto dot feature} % \begin{counter}{subsection} % \begin{command}{\thesubsection} % \begin{command}{\subsectionmarkformat} % \changes{v2.3a}{1995/07/08}{space after number increased} % \changes{v2.3c}{1995/08/06}{auto dot feature} % \begin{counter}{subsubsection} % \begin{command}{\thesubsubsection} % \begin{counter}{paragraph} % \begin{command}{\theparagraph} % \begin{counter}{subparagraph} % \begin{command}{\thesubparagraph} % The counter would also be defined by \cs{DeclareSectionCommand}. But because % of handling \cs{frontmatter} and \cs{backmatter} and prefix lines we cannot % use the default definition of the formatting of \cnt{section}. So we define % it already before calling \cs{DeclareSectionCommand} for \cs{section}. % \begin{description} % \item[ToDo:] Do we really need the explicit definition of \cnt{subsection}, % \cnt{subsubsection}, \cnt{paragraph}, and \cnt{subparagraph} of would the % implicit definition by \cs{DeclareSectionCommand} be enough for these. % \end{description} % \begin{macrocode} %<*book|report> \newcounter{section}[chapter] \renewcommand*\thesection{% %<*book> % \expandafter\ifnum\scr@v@is@gt{2.97d}% \if@mainmatter\thechapter.\fi % \else % \thechapter.% % \fi \@arabic\c@section } % %<*article> \newcounter{section} \renewcommand*{\thesection}{\@arabic\c@section} %

\newcommand*\sectionmarkformat{\thesection\autodot\enskip} \newcounter{subsection}[section] \renewcommand*{\thesubsection}{\thesection.\@arabic\c@subsection} %<*article> \newcommand*\subsectionmarkformat{\thesubsection\autodot\enskip} %

\newcounter{subsubsection}[subsection] \renewcommand*{\thesubsubsection}{% \thesubsection.\@arabic\c@subsubsection } \newcounter{paragraph}[subsubsection] \renewcommand*{\theparagraph}{\thesubsubsection.\@arabic\c@paragraph} \newcounter{subparagraph}[paragraph] \renewcommand*{\thesubparagraph}{% \theparagraph.\@arabic\c@subparagraph } % \end{macrocode} % \begin{macro}{\@seccntformat} % \changes{v2.3c}{1995/08/06}{CJK support extended} % \changes{v2.9p}{2004/01/07}{\cs{protect} added} % \changes{v2.97}{2007/01/24}{workaround for the ugly \cs{protect}} % \changes{v3.17}{2015/02/23}{using \cs{\dots format} if exists} % \changes{v3.17}{2015/03/31}{using \cs{protect} for \cs{\dots format}} % \begin{command}{\othersectionlevelsformat} % \changes{v2.7}{2000/01/03}{added} % \changes{v2.7}{2000/01/03}{\cs{quad} replaced by \cs{enskip}} % \changes{v2.7i}{2001/05/17}{\cs{let} replaced by \cs{def}} % \changes{v2.97}{2007/01/24}{three arguments instead of only one} % With \KOMAScript~2 \cs{othersectionlevelsformat} has had only one argument, % the \cs{…format} command of the level. But with there has been expansion % issues. So we have had to change the definition to % \begin{quote} % \cs{othersectionlevelsformat}\marg{level name}\marg{ignore % command}\marg{the command} % \end{quote} % Users who use or redefine \cs{othersectionlevelsformat} should always ignore % the \meta{ignore command}. It is used to internally handle deprecated % definitions of \cs{othersectionlevelsformat} with only one % argument. \meta{level name} is the name of the level command, e.g., % |subsubsection|. \meta{the command} is the \cs{the…} command corresponding % with \marg{level name}. See the definition of \cs{@seccntformat} for more % information about the internal usage of \cs{othersectionlevelsformat}. % \begin{description} % \item[ToDo:] Can we somehow change this for \KOMAScript~4 to no longer % support the second argument (unless a low compatibility level is used)? % \end{description} % \begin{macrocode} \newcommand*{\othersectionlevelsformat}[3]{#3\autodot\enskip} \renewcommand*{\@seccntformat}[1]{% % \expandafter\ifnum\scr@v@is@lt{3.17}\relax % \protect\othersectionlevelsformat{#1}{% % \expandafter\aftergroup\noexpand\@gobble}{\csname the#1\endcsname}% % \else \scr@ifundefinedorrelax{#1format}{% \protect\othersectionlevelsformat{#1}{% \expandafter\aftergroup\noexpand\@gobble}{\csname the#1\endcsname}% }{\expandafter\protect\csname #1format\endcsname}% % \fi } % \end{macrocode} % \end{command}^^A \othersectonlevelsformat % \end{macro}^^A \@seccntformat % \end{command}^^A \thesubparagraph % \end{counter}^^A subparagraph % \end{command}^^A \theparagraph % \end{counter}^^A paragraph % \end{command}^^A \thesubsubsection % \end{counter}^^A subsubsection % \end{command}^^A \subsectionformat % \end{command}^^A \thesubsection % \end{counter}^^A subsection % \end{command}^^A \sectionformat % \end{command}^^A \thesection % \end{counter}^^A section % % % \begin{command}{\addsecmark} % \changes{v3.12}{2013/03/26}{added} % \cs{addsec} and marks for running heads are a little bit % complicated. Currently we are using a local setting of \cnt{secnumdept} to % switch of numbering and then using \cs{sectionmark}. So the \cs{sectionmark} % definition should always respect \cnt{secnumdepth}. % \begin{macrocode} \newcommand*\addsecmark[1]{% \begingroup \c@secnumdepth=\numexpr \sectionnumdepth-1\relax \sectionmark{#1}% \endgroup } % \end{macrocode} % \end{command}^^A \addsecmark % % % \begin{fontelement}{sectionentry} % \changes{v2.97c}{2007/06/21}{added} % \changes{v3.06}{2010/06/09}{font element \fnt{sectioning} replaced by % \fnt{disposition}} % With \cls*{scrartcl} \cs{section} entries to the table of contents initially % using \fnt{disposition}, the basic font of all outlines. % \begin{macrocode} %<*article> \newkomafont{sectionentry}{\usekomafont{disposition}} % \end{macrocode} % \end{fontelement} % % \begin{fontelement}{sectionentrypagenumber} % \changes{v2.97c}{2007/06/21}{added} % The page number of \cs{section} entries to the table of contents is % initially the same as the entry at whole with \cls*{scrartcl}. % \begin{macrocode} \newkomafont{sectionentrypagenumber}{} % \end{macrocode} % \end{fontelement} % % \begin{fontelement}{sectionentrydots} % \changes{v3.15}{2014/12/10}{added} % \changes{v3.27}{2019/10/28}{\cs{normalfont} removed} % If the optional dots for \cs{section} entries to the table of contents are % used, we can change the font of the dots also. It is used for the % \texttt{linefill} of \pkg*{tocbasic} ToC entry style \texttt{section}, that % uses ToC entry style \texttt{tocline} where the line filler is always % prefixed by \cs{normalfont}\cs{normalsize}. So the setting is relative to % this. The color is relative to the color of \fnt{sectionentry}. % \begin{macrocode} \newkomafont{sectionentrydots}{} %

% \end{macrocode} % \end{fontelement} % % % \begin{command}{\partnumdepth,\chapternumdepth, % \sectionnumdepth,\subsectionnumdepth,\subsubsectionnumdepth, % \paragraphnumdepth,\subparagraphnumdepth, % \parttocdepth,\chaptertocdepth % \sectiontocdepth,\subsectiontocdepth,\subsubsectiontocdepth, % \paragraphtocdepth,\subparagraphtocdepth} % \changes{v3.12}{2013/12/16}{added} % \changes{v3.15}{2014/12/09}{indirect definition by % \cs{DeclareSectionCommand}} % The section numbering levels, to be compared with counter % \cnt{secnumdepth}, and the table of contents entry levels, to be compared % with counter \cs{tocdepth}, of all outline commands defined by the % \KOMAScript{} classes. % \begin{description} % \item[Note:] These are specified to be \emph{read only}. They are defined by % \cs{DeclareSectionCommand}. % \end{description} % \end{command}^^A \partnumdepth … \subparagraphtocdepth % % \begin{command}{\part} % \changes{v3.18}{2015/05/25}{indirect definition by \cs{DeclareSectionCommand}} % \changes{v3.26}{2018/06/27}{definition moved behind \cs{section} because of % bookmark level workaround} % \begin{command}{\chapter} % \changes{v2.8d}{2001/07/05}{using \cs{chapterpagestyle}} % \changes{v3.18}{2015/05/20}{indirect definition by \cs{DeclareSectionCommand}} % \begin{command}{\section} % \changes{v2.8p}{2001/09/22}{\cs{sectfont} before \cs{size@section}} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} after \cs{sectfont} added} % \changes{v2.96a}{2006/11/30}{initial value of \cs{parfillskip} depending on % option \opt{version}} % \changes{v2.96a}{2006/12/03}{not needed \cs{nobreak} removed} % \changes{v3.13a}{2014/09/11}{using \cs{scr@startsection}} % \changes{v3.15}{2014/11/24}{indirect definition by \cs{DeclareSectionCommand}} % \begin{command}{\subsection} % \changes{v2.8p}{2001/09/22}{\cs{sectfont} before \cs{size@subsection}} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} after \cs{sectfont} added} % \changes{v2.96a}{2006/11/30}{initial value of \cs{parfillskip} depending on % option \opt{version}} % \changes{v2.96a}{2006/12/03}{not needed \cs{nobreak} removed} % \changes{v3.13a}{2014/09/11}{using \cs{scr@startsection}} % \changes{v3.15}{2014/11/24}{indirect definition by \cs{DeclareSectionCommand}} % \begin{command}{\subsubsection} % \changes{v2.3d}{1995/08/19}{with \cls*{scrartcl} also numbered and added to % ToC} % \changes{v2.8p}{2001/09/22}{\cs{sectfont} added before % \cs{size@subsubsection}} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} added after \cs{sectfont}} % \changes{v2.96a}{2006/11/30}{initial value of \cs{parfillskip} depending on % option \opt{version}} % \changes{v2.96a}{2006/12/03}{not needed \cs{nobreak} removed} % \changes{v3.13a}{2014/09/11}{using \cs{scr@startsection}} % \changes{v3.15}{2014/11/24}{indirect definition by \cs{DeclareSectionCommand}} % \begin{command}{\paragraph} % \changes{v2.8p}{2001/09/22}{\cs{sectfont} added before % \cs{size@paragraph}} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} added after \cs{sectfont}} % \changes{v2.96a}{2006/12/03}{not needed \cs{nobreak} removed} % \changes{v3.15}{2014/11/24}{indirect definition by \cs{DeclareSectionCommand}} % \begin{command}{\subparagraph} % \changes{v2.8p}{2001/09/22}{\cs{sectfont} added before % \cs{size@subparagraph}} % \changes{v2.8q}{2002/02/28}{\cs{nobreak} added after \cs{sectfont}} % \changes{v2.96a}{2006/12/03}{not needed \cs{nobreak} removed} % \changes{v3.13a}{2014/09/11}{using \cs{scr@startsection}} % \changes{v3.15}{2014/11/24}{indirect definition by \cs{DeclareSectionCommand}} % \changes{v3.15}{2014/11/24}{\cs{parindent} replaced by \cs{scr@parindent}} % Commands \cs{part}, \cs{chapter}, \cs{section}, \cs{subsection}, % \cs{subsubection}, \cs{paragraph} and \cs{subparagraph} are defined using % \cs{DeclareSectionCommand}. The definition of \cs{part} must be \emph{after} % \cs{section} because of the bookmark level workaround (see definition of % \cs{DelcareSectionCommand}. The declaration of \cs{chapter} uses only those % settings that do not depend on options, because settings by class options % must no be overwritten here. So all settings that do depend on class options % have to be initialized before the options (see the \texttt{prepare} code of % such options above). For the lower levels this is only the case for the font. % \begin{macrocode} %<*book|report> \DeclareSectionCommand[% style=chapter,% level=\z@,% pagestyle=plain,% tocstyle=chapter,% tocindent=\z@,% tocnumwidth=1.5em% ]{chapter} % \DeclareSectionCommand[% style=section,% level=1,% indent=\z@,% beforeskip=-3.5ex \@plus -1ex \@minus -.2ex,% afterskip=2.3ex \@plus.2ex,% tocstyle=section,% % tocindentfollows=chapter,% %

tocindent=0pt,% % tocindent=1.5em,% %

tocnumwidth=1.5em% % tocnumwidth=2.3em% ]{section} \DeclareSectionCommand[% style=part,% %

level=\z@,% % level=\m@ne,% % pagestyle=plain,% tocstyle=part,% toclevel=\m@ne,% tocindent=\z@,% tocnumwidth=2em% ]{part} \DeclareSectionCommand[% style=section,% level=2,% indent=\z@,% beforeskip=-3.25ex\@plus -1ex \@minus -.2ex,% afterskip=1.5ex \@plus .2ex,% %

tocstyle=subsection,% % tocstyle=section,% %

tocindent=1.5em,% % tocindent=3.8em,% %

tocnumwidth=2.3em% % tocnumwidth=3.2em% ]{subsection} \DeclareSectionCommand[% style=section,% level=3,% indent=\z@,% beforeskip=-3.25ex\@plus -1ex \@minus -.2ex,% afterskip=1.5ex \@plus .2ex,% %

tocstyle=subsection,% % tocstyle=section,% %

tocindent=3.8em,% % tocindent=7.0em,% %

tocnumwidth=3.2em% % tocnumwidth=4.1em% ]{subsubsection} \DeclareSectionCommand[% style=section,% level=4,% indent=\z@,% beforeskip=3.25ex \@plus1ex \@minus.2ex,% afterskip=-1em,% %

tocstyle=subsection,% tocindentfollows=subsubsection,% % tocstyle=section,% %

tocindent=7.0em,% % tocindent=10em,% %

tocnumwidth=4.1em% % tocnumwidth=5em% ]{paragraph} \DeclareSectionCommand[% style=section,% level=5,% indent=\scr@parindent,% beforeskip=3.25ex \@plus1ex \@minus .2ex,% afterskip=-1em,% %

tocstyle=subsection,% % tocstyle=section,% %

tocindent=10em,% % tocindent=12em,% %

tocnumwidth=5em% % tocnumwidth=6em% ]{subparagraph} %\expandafter\ifnum\scr@v@is@lt{3.15}\relax % \let\scr@subparagraph@sectionindent\parindent %\else \def\scr@subparagraph@sectionindent{\scr@parindent}% %\fi % % \end{macrocode} % \end{command}^^A \subparagraph % \end{command}^^A \paragraph % \end{command}^^A \subsubsection % \end{command}^^A \subsection % \end{command}^^A \section % \end{command}^^A \chapter % \end{command}^^A \part % % % \subsection{Fonts} % % The font settings of dedicated elements of the the corresponding section % levels already have been done. But there are also some elements that do not % correspond with a single section level. % % \begin{fontelement}{disposition,sectioning} % \changes{v2.95b}{2006/07/30}{added} % \changes{v3.39}{2023/04/04}{also with \pkg*{scrextend} as documented} % \begin{macro}{\sectfont} % \changes{v2.8c}{2001/06/29}{\cs{normalcolor} added} % \changes{v3.12}{2013/11/11}{earlier definition to support option % \opt{headings\quotechar=standardclasses}} % \changes{v3.20}{2016/01/29}{\cs{sffamily} replaced by \cs{@gr@gsffamily}} % \changes{v3.39}{2023/04/04}{\cs{@gr@gsfamily} replaced by \cs{maybesffamily}} % This element is not only used by all section levels before the dedicated % element of the single level is used. It is also used by other elements like % the \fnt{chaptertocentry}. The command \cs{sectfont} instead of the % \cs{newkomafont} default is used for compatibility only. So it is specified % as internal. Using it as user command is deprecated! % \begin{macrocode} % %<*(class&!letter)|(package&extend)> %<*prepare> \newcommand*{\sectfont}{\normalcolor\maybesffamily\bfseries} % % %<*book|report|article|extend> %<*body> \newcommand*{\scr@fnt@disposition}{\sectfont} \aliaskomafont{sectioning}{disposition} % % % \end{macrocode} % \end{macro}^^A \sectfont % \end{fontelement}^^A disposition, sectioning % % % \begin{option}{headings} % \changes{v2.3h}{1996/01/20}{Size of \cs{chapter} decreased by one grade % step} % \changes{v2.3h}{1996/01/20}{using \cs{chapterheadstartvskip} and % \cs{chapterheadendvskip}} % \changes{v2.7c}{2000/01/19}{vertical distance after chapters slightly % changed and glue added} % \changes{v2.98c}{2008/03/10}{added} % \changes{v3.10}{2011/08/30}{extended optional argument} % \changes{v3.12}{2013/03/05}{using \cs{FamilyKeyState}} % \changes{v3.12}{2013/08/26}{\cs{KOMA@options} replaced by \cs{KOMAoptions}} % \changes{v3.12}{2013/11/11}{value \opt{\quotechar=standardclasses} added} % \changes{v3.15}{2014/11/24}{using \cs{scr@chapter@beforeskip} and % \cs{scr@chapter@afterskip}} % \changes{v3.17}{2015/03/09}{using internal value storage} % \changes{v3.18}{2015/05/20}{values of \cs{scr@chapter@beforeskip} negative} % \changes{v3.39}{2022/11/11}{initial dot removed from member argument of % option storage commands} % Option \opt{headings} is the main switch for the headings of all outlines. % It provides the following values: % \begin{macrocode} %<*class&!letter> %<*option> \KOMA@key{headings}{% \KOMA@set@ncmdkey{headings}{@tempa}{% % \end{macrocode} % \begin{description} % \item[\opt{=big}:] use big sized headings. This also changes the distances % of chapter and redefined \cs{chapterheadstartvskip} and % \cs{chapterheadendvskip} (\cls*{scrbook} and \cls*{scrreprt} only). % \end{description} % \begin{macrocode} {big}{0},% % \end{macrocode} % \begin{description} % \item[\opt{=normal}:] use medium sized headings. This also changes the % distances of chapter and redefined \cs{chapterheadstartvskip} and % \cs{chapterheadendvskip} (\cls*{scrbook} and \cls*{scrreprt} only). % \end{description} % \begin{macrocode} {normal}{1},% % \end{macrocode} % \begin{description} % \item[\opt{=small}:] use small sized headings. This also changes the % distances of chapter and redefined \cs{chapterheadstartvskip} and % \cs{chapterheadendvskip} (\cls*{scrbook} and \cls*{scrreprt} only). % \end{description} % \begin{macrocode} {small}{2},% % \end{macrocode} % \begin{description} % \item[\opt{=openany}:] same as \opt{open=any} for \cls*{scrbook} and % \cls*{scrreprt}. % \end{description} % \begin{macrocode} %<*book|report> {openany}{3},% % \end{macrocode} % \begin{description} % \item[\opt{=openright}:] same as \opt{open=right} for \cls*{scrbook} and % \cls*{scrreprt}. % \end{description} % \begin{macrocode} {openright}{4},% % \end{macrocode} % \begin{description} % \item[\opt{=openleft}:] same as \opt{open=left} for \cls*{scrbook} and % \cls*{scrreprt}. % \end{description} % \begin{macrocode} {openleft}{5},% % \end{macrocode} % \begin{description} % \item[\opt{=twolinechapter}:] use chapter headings with two lines. The first % line is a kind of prefix line with the number and a prefix text only. The % second one is the heading text. % \end{description} % \begin{macrocode} {twolinechapter}{6},{chapterprefix}{6},{chapterwithprefix}{6},% {chapterwithprefixline}{6},% % \end{macrocode} % \begin{description} % \item[\opt{=onelinechapter}:] use chapter headings without the prefix line. % \end{description} % \begin{macrocode} {onelinechapter}{7},{nochapterprefix}{7},{chapterwithoutprefix}{7},% {chapterwithoutprefixline}{7},% % \end{macrocode} % \begin{description} % \item[\opt{=twolineappendix}:] use chapter headings with two lines in the % appendix. This overwrites \opt{headings=onelinechapter} for the chapters % of the appendix. % \end{description} % \begin{macrocode} {twolineappendix}{8},{appendixprefix}{8},{appendixwithprefix}{8},% {appendixwithprefixline}{8},% % \end{macrocode} % \begin{description} % \item[\opt{=onelineappendix}:] use chapter headings without prefix line in % the appendix. This overwrites \opt{headings=twolinechapter} for the % chapters of the appendix. % \end{description} % \begin{macrocode} {onelineappendix}{9},{noappendixprefix}{9},{appendixwithoutprefix}{9},% {appendixwithoutprefixline}{9},% % % \end{macrocode} % \begin{description} % \item[\opt{=optiontotocandhead}:] activates the extended option handling of % all outline commands and uses an unspecified optional argument as default % of for the running head and the ToC entry. % \end{description} % \begin{macrocode} {optiontotocandhead}{10},{optiontoheadandtoc}{10},% % \end{macrocode} % \begin{description} % \item[\opt{=optiontotoc}:] activates the extended option handling of all % outline commands and uses an unspecified optional argument as default for % the ToC entry only. % \end{description} % \begin{macrocode} {optiontotoc}{11},% % \end{macrocode} % \begin{description} % \item[\opt{=optiontohead}:] activated the extended option handling of all % outline commands and uses an unspecified optional argument as default fot % the running head. % \end{description} % \begin{macrocode} {optiontohead}{12},% % \end{macrocode} % \begin{description} % \item[\opt{=standardclasses}:] reconfigure headings (at least the fonts) to % look more like the headings of the standard classes than the defaults of % \KOMAScript. % \end{description} % \begin{macrocode} {standardclasses}{13}% }{#1}% \ifx\FamilyKeyState\FamilyKeyStateProcessed \ifcase \@tempa\relax% big \KOMA@kav@remove{\KOMAClassFileName}{headings}{big}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{normal}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{small}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{standardclasses}% \KOMA@kav@add{\KOMAClassFileName}{headings}{big}% % \end{macrocode} % First of all we handle the three size values. % \begin{description} % \item[Note:] These are redefining \cs{chapterheadstartvkip} and % \cs{chapterheadendvskip}. % \item[Note:] The |+\baselineskip+\parskip| is needed to stay compatible with % old version of \KOMAScript{} not providing \cs{DeclareSectionCommand}. They % are regarded inside setting of the preamble to print heading with % |beforeskip=0pt| at the very beginning of the text area. % \end{description} % \begin{macrocode} %<*book|report> \renewcommand*{\scr@chapter@beforeskip}{-3.3\baselineskip-\parskip}% \renewcommand*{\scr@chapter@afterskip}{% 1.725\baselineskip \@plus .115\baselineskip \@minus .192\baselineskip }% \renewcommand*{\scr@chapter@innerskip}{.5\baselineskip}% \renewcommand*{\chapterheadstartvskip}{\vspace{\@tempskipa}}% \renewcommand*{\chapterheadendvskip}{% % \expandafter\ifnum\scr@v@is@lt{3.15}\vspace\@tempskipa\else \vskip\@tempskipa % \fi }% \renewcommand*{\chapterheadmidvskip}{\par\nobreak\vskip\@tempskipa}% % \setkomafont{part}{\Huge}% \setkomafont{partnumber}{\huge}% % \setkomafont{chapter}{\huge}% % \setkomafont{chapterprefix}{\size@chapter}% \setkomafont{section}{\Large}% \setkomafont{subsection}{\large}% \setkomafont{subsubsection}{\normalsize}% \setkomafont{paragraph}{\normalsize}% \setkomafont{subparagraph}{\normalsize}% \or % normal \KOMA@kav@remove{\KOMAClassFileName}{headings}{big}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{normal}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{small}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{standardclasses}% \KOMA@kav@add{\KOMAClassFileName}{headings}{normal}% %<*book|report> \renewcommand*{\scr@chapter@beforeskip}{-3\baselineskip-\parskip}% \renewcommand*{\scr@chapter@afterskip}{% 1.5\baselineskip \@plus .1\baselineskip \@minus .167\baselineskip }% \renewcommand*{\scr@chapter@innerskip}{.5\baselineskip}% \renewcommand*{\chapterheadstartvskip}{\vspace{\@tempskipa}}% \renewcommand*{\chapterheadendvskip}{% % \expandafter\ifnum\scr@v@is@lt{3.15}\vspace\@tempskipa\else \vskip\@tempskipa % \fi }% \renewcommand*{\chapterheadmidvskip}{\par\nobreak\vskip\@tempskipa}% % \setkomafont{part}{\huge}% \setkomafont{partnumber}{\huge}% %<*book|report> \setkomafont{chapter}{\LARGE}% \setkomafont{chapterprefix}{\size@chapter}% \setkomafont{section}{\Large}% \setkomafont{subsection}{\large}% % %<*article> \setkomafont{section}{\large}% \setkomafont{subsection}{\normalsize}% %

\setkomafont{subsubsection}{\normalsize}% \setkomafont{paragraph}{\normalsize}% \setkomafont{subparagraph}{\normalsize}% \or % small \KOMA@kav@remove{\KOMAClassFileName}{headings}{big}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{normal}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{small}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{standardclasses}% \KOMA@kav@add{\KOMAClassFileName}{headings}{small}% %<*book|report> \renewcommand*{\scr@chapter@beforeskip}{-2.8\baselineskip-\parskip}% \renewcommand*{\scr@chapter@afterskip}{% 1.35\baselineskip \@plus 0.09\baselineskip \@minus .15\baselineskip }% \renewcommand*{\scr@chapter@innerskip}{.5\baselineskip}% \renewcommand*{\chapterheadstartvskip}{\vspace{\@tempskipa}}% \renewcommand*{\chapterheadendvskip}{% % \expandafter\ifnum\scr@v@is@lt{3.15}\vspace\@tempskipa\else \vskip\@tempskipa % \fi }% \renewcommand*{\chapterheadmidvskip}{\par\nobreak\vskip\@tempskipa}% % \setkomafont{part}{\LARGE}% \setkomafont{partnumber}{\LARGE}% %<*book|report> \setkomafont{chapter}{\Large}% \setkomafont{chapterprefix}{\size@chapter}% \setkomafont{section}{\large}% % %<*article> \setkomafont{section}{\normalsize}% %

\setkomafont{subsection}{\normalsize}% \setkomafont{subsubsection}{\normalsize}% \setkomafont{paragraph}{\normalsize}% \setkomafont{subparagraph}{\normalsize}% % \end{macrocode} % \cls*{scrbook} and \cls*{scrreprt} also provide settings that are delegated % to option \opt{open}. % \begin{macrocode} \or % openany %<*book|report> \KOMAoptions{open=any}% % \or % openright %<*book|report> \KOMAoptions{open=right}% % \or % openleft %<*book|report> \KOMAoptions{open=left}% % % \end{macrocode} % \cls*{scrbook} and \cls*{scrreprt} also provide settings that are delegated % to option \opt{chapterprefix} and \opt{appendixprefix}. % \begin{macrocode} \or % twolinechapter %<*book|report> \KOMAoptions{chapterprefix=true}% % \or % onelinechapter %<*book|report> \KOMAoptions{chapterprefix=false}% % \or % twolineappendix %<*book|report> \KOMAoptions{appendixprefix=true}% % \or % onelineappendix %<*book|report> \KOMAoptions{appendixprefix=false}% % % \end{macrocode} % We have also options to handle the extended optional argument. % \begin{macrocode} \or % optiontotocandhead \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontotocandhead}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontotoc}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontohead}% \KOMA@kav@add{\KOMAClassFileName}{headings}{optiontotocandhead}% \scr@activate@xsection{3}% \or % optiontotoc \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontotocandhead}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontotoc}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontohead}% \KOMA@kav@add{\KOMAClassFileName}{headings}{optiontotoc}% \scr@activate@xsection{2}% \or % optiontohead \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontotocandhead}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontotoc}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{optiontohead}% \KOMA@kav@add{\KOMAClassFileName}{headings}{optiontohead}% \scr@activate@xsection{1}% % \end{macrocode} % Last but not least the option to activate the standard class emulation of % headings. % \begin{macrocode} \or % standardclasses \KOMA@kav@remove{\KOMAClassFileName}{headings}{big}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{normal}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{small}% \KOMA@kav@remove{\KOMAClassFileName}{headings}{standardclasses}% \KOMA@kav@add{\KOMAClassFileName}{headings}{standardclasses}% %<*book|report> \renewcommand*{\scr@chapter@beforeskip}{-50\p@}% \renewcommand*{\scr@chapter@afterskip}{40\p@}% \renewcommand*{\scr@chapter@innerskip}{20\p@}% \renewcommand*{\chapterheadstartvskip}{\vspace{\@tempskipa}}% \renewcommand*{\chapterheadendvskip}{\vskip\@tempskipa}% \renewcommand*{\chapterheadmidvskip}{\par\nobreak\vskip\@tempskipa}% \setkomafont{part}{\Huge}% \setkomafont{partnumber}{\huge}% \setkomafont{chapter}{\Huge}% \setkomafont{chapterprefix}{\huge}% % %<*article> \setkomafont{part}{\huge}% \setkomafont{partnumber}{\Large}% %

\setkomafont{section}{\Large}% \setkomafont{subsection}{\large}% \setkomafont{subsubsection}{\normalsize}% \setkomafont{paragraph}{\normalsize}% \setkomafont{subparagraph}{\normalsize}% \renewcommand*{\sectfont}{\bfseries}% % \KOMAoptions{open=right,chapterprefix=true}% \fi \fi } \KOMA@kav@add{\KOMAClassFileName}{headings}{big} %\KOMA@kav@add{\KOMAClassFileName}{headings}{onelinechapter} % \end{macrocode} % \end{option}^^A headings % % \begin{option}{bigheadings,normalheadings,smallheadings} % \changes{v2.3h}{1996/01/20}{added} % \changes{v2.4g}{1996/11/04}{option name fixed} % \changes{v2.98c}{2008/03/10}{obsolete} % \changes{v3.01a}{2008/11/20}{deprecated} % \changes{v3.99}{2022/11/16}{removed from \KOMAScript~4} % \begin{macro}{\@bigheadings,\@normalheadings,\@smallheadings} % \changes{v2.98c}{2008/03/10}{removed} % \end{macro}^^A \@bigheadings … \@smallheadings % We also have some deprecated options. % \begin{macrocode} %<*!v4> \KOMA@DeclareDeprecatedOption{bigheadings}{headings=big} \KOMA@DeclareDeprecatedOption{normalheadings}{headings=normal} \KOMA@DeclareDeprecatedOption{smallheadings}{headings=small} % % % \end{macrocode} % \end{option}^^A smallheading,normalheadings,bigheadings % % \begin{macrocode} % % \end{macrocode} % % \Finale % \PrintChanges % \endinput % Local Variables: % mode: doctex % ispell-local-dictionary: "en_US" % eval: (flyspell-mode 1) % TeX-master: t % TeX-engine: luatex-dev % eval: (setcar (or (cl-member "Index" (setq-local TeX-command-list (copy-alist TeX-command-list)) :key #'car :test #'string-equal) (setq-local TeX-command-list (cons nil TeX-command-list))) '("Index" "mkindex %s" TeX-run-index nil t :help "makeindex for dtx")) % End: