Diving Behaviour Analysis in R

Sebastián P. Luque

2024-10-12

This vignette is an updated version of the R News article in Luque (2007).

Remarkable developments in technology for electronic data collection and archival have increased researchers’ ability to study the behaviour of aquatic animals while reducing the effort involved and impact on study animals. For example, interest in the study of diving behaviour led to the development of minute time-depth recorders (TDRs) that can collect more than 15 MB of data on depth, velocity, light levels, and other parameters as animals move through their habitat. Consequently, extracting useful information from TDRs has become a time-consuming and tedious task. Therefore, there is an increasing need for efficient software to automate these tasks, without compromising the freedom to control critical aspects of the procedure.

There are currently several programs available for analyzing TDR data to study diving behaviour. The large volume of peer-reviewed literature based on results from these programs attests to their usefulness. However, none of them are in the free software domain, to the best of my knowledge, with all the disadvantages it entails. Therefore, the main motivation for writing diveMove was to provide an R package for diving behaviour analysis allowing for more flexibility and access to intermediate calculations. The advantage of this approach is that researchers have all the elements they need at their disposal to take the analyses beyond the standard information returned by the program.

The purpose of this article is to outline the functionality of diveMove, demonstrating its most useful features through an example of a typical diving behaviour analysis session. Further information can be obtained by reading the vignette that is included in the package (vignette("diveMove")) which is currently under development, but already shows basic usage of its main functions. diveMove is available from CRAN, so it can easily be installed using install.packages().

Features

diveMove offers functions to perform the following tasks:

Additional features are included to aid in analysis of movement and location data, which are often collected concurrently with TDR data. They include calculation of distance and speed between successive locations, and filtering of erroneous locations using various methods. However, diveMove is primarily a diving behaviour analysis package, and other packages are available which provide more extensive animal movement analysis features (e.g. trip).

The tasks described above are possible thanks to the implementation of three formal S4 classes to represent TDR data. Classes TDR and TDRspeed are used to represent data from TDRs with and without speed sensor readings, respectively. The latter class inherits from the former, and other concurrent data can be included with either of these objects. A third formal class (TDRcalibrate) is used to represent data obtained during the various intermediate steps described above. This structure greatly facilitates the retrieval of useful information during analyses.

Preliminary Procedures

As with other packages in R, to use the package we load it with the funtion library:

library(diveMove)

This makes the objects in the package available in the current R session. A short overview of the most important functions can be seen by running the examples in the package’s help page:

example(diveMove)

Data Preparation

TDR data are essentially a time-series of depth readings, possibly with other concurrent parameters, typically taken regularly at a user-defined interval. Depending on the instrument and manufacturer, however, the files obtained may contain various errors, such as repeated lines, missing sampling intervals, and invalid data. These errors are better dealt with using tools other than R, such as awk and its variants, because such stream editors use much less memory than R for this type of problems, especially with the typically large files obtained from TDRs. Therefore, diveMove currently makes no attempt to fix these errors. Validity checks for the TDR classes, however, do test for time series being in increasing order.

Most TDR manufacturers provide tools for downloading the data from their TDRs, but often in a proprietary format. Fortunately, some of these manufacturers also offer software to convert the files from their proprietary format into a portable format, such as comma-separated-values (csv). At least one of these formats can easily be understood by R, using standard functions, such as read.table() or read.csv(). diveMove provides constructors for its two main formal classes to read data from files in one of these formats, or from simple data frames.

TDR Data Representation

TDR is the simplest class of objects used to represent TDR data in diveMove. This class, and its TDRspeed subclass, stores information on the source file for the data, the sampling interval, the time and depth readings, and an optional data frame containing additional parameters measured concurrently. The only difference between TDR and TDRspeed objects is that the latter ensures the presence of a speed vector in the data frame with concurrent measurements. These classes have the following slots:

Once the TDR data files are free of errors and in a portable format, they can be read into a data frame, using e.g.:

fp <- file.path("data", "dives.csv")
sfp <- system.file(fp, package="diveMove")
srcfn <- basename(sfp)
tdrXcsv <- read.csv(sfp, sep=";")

and then put into one of the TDR classes using the function createTDR(). Note, however, that this approach requires knowledge of the sampling interval and making sure that the data for each slot are valid:

ddtt.str <- paste(tdrXcsv$date, tdrXcsv$time)
ddtt <- strptime(ddtt.str,
                 format="%d/%m/%Y %H:%M:%S")
time.posixct <- as.POSIXct(ddtt, tz="GMT")
tdrX <- createTDR(time=time.posixct,
                  depth=tdrXcsv$depth,
                  concurrentData=tdrXcsv[, -c(1:3)],
                  dtime=5, file=srcfn)
## Or a TDRspeed object, since we know we have
## speed measurements:
tdrX <- createTDR(time=time.posixct,
                  depth=tdrXcsv$depth,
                  concurrentData=tdrXcsv[, -c(1:3)],
                  dtime=5, file=srcfn,
                  speed=TRUE)

If the files are in *.csv format, these steps can be automated using the readTDR() function to create an object of one of the formal classes representing TDR data (TDRspeed in this case), and immediately begin using the methods provided:

fp <- file.path("data", "dives.csv")
sfp <- system.file(fp, package="diveMove")
tdrX <- readTDR(sfp, speed=TRUE, sep=";",
                na.strings="", as.is=TRUE)
plotTDR(tdrX)
The `plotTDR()` method for *TDR* objects produces an interactive (disabled here to minimize vignette size) plot of the data, allowing for zooming and panning.

The plotTDR() method for TDR objects produces an interactive (disabled here to minimize vignette size) plot of the data, allowing for zooming and panning.

Several arguments for readTDR() allow mapping of data from the source file to the different slots in diveMove’s classes, the time format in the input and the time zone attribute to use for the time readings.

Various methods are available for displaying TDR objects, including show(), which provides an informative summary of the data in the object, extractors and replacement methods for all the slots. There is a plotTDR() method for both TDR and TDRspeed objects. Information on these methods is available via methods?TDR.

TDR objects can easily be coerced to data frame (as.data.frame() method), without losing information from any of the slots. TDR objects can additionally be coerced to TDRspeed, whenever it makes sense to do so, using an as.TDRspeed() method.

Identification of Activities at Various Scales

One of the first steps of dive analysis is to identify dry and wet periods in the record. This is done with function calibrateDepth(). Wet periods are those with depth readings, dry periods are those without them. However, records may have aberrant missing depth that should not define dry periods, as they are usually of very short duration1. Likewise, there may be periods of wet activity that are too short to be compared with other wet periods, and need to be excluded from further analyses. These aspects can be controlled by setting the arguments dry.thr and wet.thr to appropriate values.

The next step involves correcting depth for shifts in the pressure transducer, so that surface readings correspond to zero. Such shifts are usually constant for an entire deployment period, but there are cases where the shifts vary within a particular deployment, so shifts remain difficult to detect and dives are often missed. Therefore, a visual examination of the data is often the only way to detect the location and magnitude of the shifts. Visual adjustment for shifts in depth readings is tedious, but has many advantages which may save time during later stages of analysis. These advantages include increased understanding of the data, and early detection of obvious problems in the records, such as instrument malfunction during certain intervals, which should be excluded from analysis.

Function calibrateDepth() takes a TDR object to perform three basic tasks:

  1. identify wet and dry periods,
  2. zero-offset correct (ZOC) the data, and
  3. identify all dives in the record and their phases.

ZOC can be done using one of three methods: visual, offset, and filter. The visual method lets the user perform the correction interactively, using the tcltk package:

dcalib <- calibrateDepth(tdrX, zoc.method="visual")

This command brings up a plot with tcltk controls allowing to zoom in and out, as well as pan across the data, and adjust the depth scale. Thus, an appropriate time window with a unique surface depth value can be displayed. This allows the user to select a depth scale that is small enough to resolve the surface value using the mouse. Clicking on the ZOC button waits for two clicks:

  1. the coordinates of the first click define the starting time for the window to be ZOC’ed, and the depth corresponding to the surface,
  2. the second click defines the end time for the window (i.e. only the x coordinate has any meaning).

This procedure can be repeated as many times as needed. If there is any overlap between time windows, then the last one prevails. However, if the offset is known a priori, method offset lets the user specify this value as the argument offset to calibrateDepth(). For example, preliminary inspection of object tdrX would have revealed a 3 m offset, and we could have simply called (without plotting):

dcalib <- calibrateDepth(tdrX,
                         zoc.method="offset",
                         offset=3)

The third method (filter) is the default, and implements a smoothing/filtering mechanism where running quantiles can be applied to depth measurements sequentially, using .depth.filter. This method usually yields adequate results by applying two filters, the first one being a running median with a narrow window to denoise the time series, followed by a running low quantile using a wide time window. The integer vector given as argument k specifies the width of the moving window(s), where \(k_{i}\) is the width for the \(i^{th}\) filter in units of the sampling interval of the TDR object. Similarly, the integer vector given as argument probs specifies the quantile for each filter, where \(probs_{i}\) is the quantile for the \(i^{th}\) filter. Smoothing/filtering can be performed within specified minimum and maximum depth bounds using argument depth.bounds2, in cases where surface durations are relatively brief separated by long periods of deep diving. These cases usually require large windows, and using depth bounds helps to stabilize the surface signal. Further details on this method are provided by Luque and Fried (2011).

dcalib <- calibrateDepth(tdrX,
                         zoc.method="filter",
                         k=c(3, 5760),
                         probs=c(0.5, 0.02),
                         na.rm=TRUE)

Once the whole record has been zero-offset corrected, remaining depths below zero, are set to zero, as these are assumed to indicate values at the surface.

Finally, calibrateDepth() identifies all dives in the record, according to a minimum depth criterion given as its dive.thr argument. The value for this criterion is typically determined by the resolution of the instrument and the level of noise close to the surface. Thus, dives are defined as departures from the surface to maximal depths below dive.thr and the subsequent return to the surface. Each dive may subsequently be referred to by an integer number indicating its position in the time series.

Dive phases are also identified at this last stage, and is done by fitting one of two cubic spline models to each dive:

  1. unimodal regression (default)
  2. smoothing spline

and then using evaluating the first derivative to determine where phases begin/end. Detection of dive phases is thus controlled by four arguments: a critical quantile for rates of vertical descent (descent.crit.q), a critical quantile for rates of ascent (ascent.crit.q), a smoothing parameter (smooth.par, relevant only for smoothing spline model (1)), and a factor (knot.factor) that multiplies the duration of the dive to obtain the number of knots at which to evaluate the derivative of the smoothing spline. The first two arguments are used to define the rate of descent below which the descent phase is deemed to have ended, and the rate of ascent above which the ascent phase is deemed to have started, respectively. The rates are obtained by evaluating the derivative of the spline at a number of knots placed regularly throughout the dive. Descent is deemed to have ended at the first minimum derivative, and the nearest input time observation is considered to indicate the end of descent. The sign of the comparisons is reversed for detecting the ascent.

A more refined call to calibrateDepth() for object tdrX may be:

dcalib <- calibrateDepth(tdrX, dive.thr=3,
                         zoc.method="offset",
                         offset=3,
                         descent.crit.q=0.01,
                         ascent.crit.q=0,
                         knot.factor=20)

The result (value) of this function is an object of class TDRcalibrate, where all the information obtained during the tasks described above are stored.

Calibrated TDR Data Representation

Objects of class TDRcalibrate contain the following slots, which store information during the major procedures performed by calibrateDepth():

All the information contained in each of these slots is easily accessible through extractor methods for objects of this class (see class?TDRcalibrate). An appropriate show() method is available to display a short summary of such objects, including the number of dry and wet periods identified, and the number of dives detected.

The TDRcalibrate plotTDR() method for these objects allows visualizing the major wet/dry activities throughout the record:

plotTDR(dcalib, concurVars=c("speed", "light"), surface=TRUE)
The `plotTDR()` method for *TDRcalibrate* objects produces an interactive (disabled here to minimize vignette size) plot displaying information on the major activities identified throughout the record (wet/dry periods in this case).

The plotTDR() method for TDRcalibrate objects produces an interactive (disabled here to minimize vignette size) plot displaying information on the major activities identified throughout the record (wet/dry periods in this case).

The dcalib object contains a TDRspeed object in its tdr slot, and speed is plotted by default in this case. Additional measurements obtained concurrently can also be plotted using the concurVars argument. Titles for the depth axis and the concurrent parameters use separate arguments; the former uses ylab.depth, while the latter uses concurVarTitles. Convenient default values for these are provided. The surface argument controls whether post-dive readings should be plotted; it is FALSE by default, causing only dive readings to be plotted which saves time plotting and re-plotting the data. All plot methods use the underlying plotTD() function, which has other useful arguments that can be passed from these methods.

A more detailed view of the record can be obtained by using a combination of the diveNo and the labels arguments to this plotTDR() method. This is useful if, for instance, closer inspection of certain dives is needed. The following call displays a plot of dives 2 through 8:

plotTDR(dcalib, diveNo=2:8, what="phases", depth.lim=c(0, 80))
The `plotTDR()` method for *TDRcalibrate* objects can also display information on the different activities identified during each dive (descent=D, descent/bottom=DB, bottom/ascent=BA, ascent=A, X=surface).

The plotTDR() method for TDRcalibrate objects can also display information on the different activities identified during each dive (descent=D, descent/bottom=DB, bottom/ascent=BA, ascent=A, X=surface).

The labels argument allows the visualization of the identified dive phases for all dives selected. The same information can also be obtained with the extractDive() method for TDRcalibrate objects:

extractDive(dcalib, diveNo=2:8)

Other useful extractors include: getGAct() and getDAct(). These methods extract the whole gross.activity and dive.activity, respectively, if given only the TDRcalibrate object, or a particular component of these slots, if supplied a string with the name of the component. For example: getGAct(dcalib, "activity") would retrieve the factor identifying each reading with a wet/dry activity and getDAct(dcalib, "dive.activity") would retrieve a more detailed factor with information on whether the reading belongs to a dive or a brief aquatic period. Below is a demonstration of these methods.

getTDR(): This method simply takes the TDRcalibrate object as its single argument and extracts the TDR object3:

getTDR(dcalib)
## Time-Depth Recorder data -- Class TDRspeed object
##   Source File          : dives.csv
##   Sampling Interval (s): 5
##   Number of Samples    : 34199
##   Sampling Begins      : 2002-01-05 11:32:00
##   Sampling Ends        : 2002-01-07 11:01:50
##   Total Duration (d)   : 1.979051
##   Measured depth range : [0, 88]
##   Other variables      :  light temperature speed

getGAct(): There are two methods for this generic, allowing access to a list with details about all wet/dry periods found. One of these extracts the entire list (output omitted for brevity):

getGAct(dcalib)

The other provides access to particular elements of the list, by their name. For example, if we are interested in extracting only the vector that tells us to which period number every row in the record belongs to, we would issue the command:

getGAct(dcalib, "phase.id")

Other elements that can be extracted are named activity, begin, and end, and can be extracted in a similar fashion. These elements correspond to the activity performed for each reading (see ?detPhase for a description of the labels for each activity), the beginning and ending time for each period, respectively.

getDAct(): This generic also has two methods; one to extract an entire data frame with details about all dive and postdive periods found (output omitted):

getDAct(dcalib)

The other method provides access to the columns of this data frame, which are named dive.id, dive.activity, and postdive.id. Thus, providing any one of these strings to getDAct, as a second argument will extract the corresponding column.

getDPhaseLab(): This generic function extracts a factor identifying each row of the record to a particular dive phase (see ?detDive for a description of the labels of the factor identifying each dive phase). Two methods are available; one to extract the entire factor, and the other to select particular dive(s), by its (their) index number, respectively (output omitted):

getDPhaseLab(dcalib)
getDPhaseLab(dcalib, 20)
dphases <- getDPhaseLab(dcalib, c(100:300))

The latter method is useful for visually inspecting the assignment of points to particular dive phases. More information about the dive phase identification procedure can be gleaned by using the plotDiveModel:

plotDiveModel(dcalib, diveNo=260)
Details of the process of identification of dive phases shown by plotDiveModel, which has methods for objects of class TDRcalibrate and diveModel.
Details of the process of identification of dive phases shown by plotDiveModel, which has methods for objects of class TDRcalibrate and diveModel.

Another generic function that allows the subsetting of the original TDR object to a single a dive or group of dives’ data:

sealX <- extractDive(dcalib, diveNo=c(100:300))
sealX
## Time-Depth Recorder data -- Class TDRspeed object
##   Source File          : dives.csv
##   Sampling Interval (s): 5
##   Number of Samples    : 1757
##   Sampling Begins      : 2002-01-05 23:40:20
##   Sampling Ends        : 2002-01-06 23:04:45
##   Total Duration (d)   : 0.9752894
##   Measured depth range : [0, 88]
##   Other variables      :  light temperature speed

As can be seen, the function extractDive takes a TDRcalibrate object and a vector indicating the dive numbers to extract, and returns a TDR object containing the subsetted data. Once a subset of data has been selected, it is possible to plot them and pass the factor labelling dive phases as the argument phaseCol to the plot method4:

plotTDR(sealX, phaseCol=dphases)

With the information obtained during this calibration procedure, it is possible to calculate dive statistics for each dive in the record.

Dive Summaries

A table providing summary statistics for each dive can be obtained with the function diveStats().

tdrXSumm1 <- head(diveStats(dcalib), 2)
cap <- "Per-dive summaries can be obtained with function `diveStats()`."
pander(tdrXSumm1, digits=2, caption=cap)
Per-dive summaries can be obtained with function diveStats(). (continued below)
begdesc enddesc begasc desctim
2002-01-05 12:20:15 2002-01-05 12:20:15 2002-01-05 12:20:20 2.5
2002-01-05 21:19:45 2002-01-05 21:20:35 2002-01-05 21:20:40 52
Table continues below
botttim asctim divetim descdist bottdist ascdist bottdep.mean
5 2.5 10 6 0 6 6
5 42 100 29 0 29 29
Table continues below
bottdep.median bottdep.sd maxdep desc.tdist desc.mean.speed
6 0 6 NA NA
29 0 29 104 2.1
Table continues below
desc.angle bott.tdist bott.mean.speed asc.tdist asc.mean.speed
NA 12 2.3 NA NA
16 9.3 1.9 57 1.4
Table continues below
asc.angle postdive.dur postdive.tdist postdive.mean.speed descD.min
NA 32355 45099 1.4 0.74
31 40 31 0.79 0.1
Table continues below
descD.1stqu descD.median descD.mean descD.3rdqu descD.max descD.sd
1 1.3 1.2 1.4 1.4 0.22
0.19 0.32 0.49 0.72 1.3 0.37
Table continues below
bottD.min bottD.1stqu bottD.median bottD.mean bottD.3rdqu bottD.max
-0.69 -0.35 -1e-15 -4.7e-16 0.35 0.69
-0.072 -0.02 0.025 0.02 0.063 0.094
Table continues below
bottD.sd ascD.min ascD.1stqu ascD.median ascD.mean ascD.3rdqu
0.42 -1.4 -1.4 -1.3 -1.2 -1
0.052 -0.81 -0.74 -0.7 -0.62 -0.55
ascD.max ascD.sd
-0.74 0.22
-0.083 0.18
tbudget <- head(timeBudget(dcalib, ignoreZ=TRUE), 5)
cap <- "Time budget summary can be calculated with function `timeBudget()`."
pander(tbudget, digits=2, caption=cap)
Time budget summary can be calculated with function timeBudget().
phase.no activity beg end
1 L 2002-01-05 11:32:00 2002-01-05 11:39:40
2 W 2002-01-05 11:39:45 2002-01-06 06:30:00
3 L 2002-01-06 06:30:05 2002-01-06 17:01:10
4 W 2002-01-06 17:01:15 2002-01-07 05:00:30
5 L 2002-01-07 05:00:35 2002-01-07 07:34:00

diveStats() returns a data frame with the final summaries for each dive, providing the following information:

A summary of time budgets of wet vs. dry periods can be obtained with timeBudget(), which returns a data frame with the beginning and ending times for each consecutive period. It takes a TDRcalibrate object and another argument (ignoreZ) controlling whether aquatic periods that were briefer than the user-specified threshold5 should be collapsed within the enclosing period of dry activity.

These summaries are the primary goal of diveMove, but they form the basis from which more elaborate and customized analyses are possible, depending on the particular research problem. These include investigation of descent/ascent rates based on the depth profiles, and bout structure analysis, which can also be done in diveMove.

In the particular case of TDRspeed objects, however, it may be necessary to calibrate the speed readings before calculating these statistics.

Calibrating Speed Sensor Readings

Calibration of speed sensor readings is performed using the procedure described by Blackwell et al. (1999). Briefly the method rests on the principle that for any given rate of depth change, the lowest measured speeds correspond to the steepest descent angles, i.e. vertical descent/ascent. In this case, measured speed and rate of depth change are expected to be equal. Therefore, a line drawn through the bottom edge of the distribution of observations in a plot of measured speed vs. rate of depth change would provide a calibration line. The calibrated speeds, therefore, can be calculated by reverse estimation of rate of depth change from the regression line.

diveMove implements this procedure with function calibrateSpeed(). This function performs the following tasks:

As recognized by Blackwell et al. (1999), the advantage of this method is that it calibrates the instrument based on the particular deployment conditions (i.e. controls for effects of position of the instrument on the animal, and size and shape of the instrument, relative to the animal’s morphometry, among others). However, it is possible to supply the coefficients of this regression if they were estimated separately; for instance, from an experiment. The argument coefs can be used for this purpose, which is then assumed to contain the intercept and the slope of the line. calibrateSpeed() returns a TDRcalibrate object, with calibrated speed readings included in its tdr slot, and the coefficients used for calibration.

For instance, to calibrate speed readings using the 0.1 quantile regression of measured speed vs. rate of depth change, based on the 0.1 contour of the bivariate kernel densities, and including only changes in depth\(>\)1, measured speeds and rates of depth change\(>\)0:

vcalib <- calibrateSpeed(dcalib, tau=0.1,
                         contour.level=0.1,
                         z=1, bad=c(0, 0),
                         cex.pts=0.2)
The relationship between measured speed and rate of depth change can be used to calibrate speed readings. The line defining the calibration for speed measurements passes through the bottom edge of a chosen contour, extracted from a bivariate kernel density grid.
The relationship between measured speed and rate of depth change can be used to calibrate speed readings. The line defining the calibration for speed measurements passes through the bottom edge of a chosen contour, extracted from a bivariate kernel density grid.

This call produces the plot shown above, which can be suppressed by the use of the logical argument plot. Calibrating speed readings allows for the meaningful interpretation of further parameters calculated by diveStats(), whenever a TDRspeed object was found in the TDRcalibrate object:

Bout Detection

Diving behaviour often occurs in bouts for several species, so diveMove implements procedures for defining bout ending criteria (Langton, Collett, and Sibly 1995; Luque and Guinet 2007). Please see ?bouts2.mle and ?bouts2.nls for examples of 2-process models.

Summary

The diveMove package provides tools for analyzing diving behaviour, including convenient methods for the visualization of the typically large amounts of data collected by TDRs. The package’s main strengths are its ability to:

Formal S4 classes are supplied to efficiently store TDR data and results from intermediate analysis, making the retrieval of intermediate results readily available for customized analysis. Development of the package is ongoing, and feedback, bug reports, or other comments from users are very welcome.

Acknowledgements

Many of the ideas implemented in this package developed over fruitful discussions with my mentors John P.Y.~Arnould, Christophe Guinet, and Edward H.~Miller. I would like to thank Laurent Dubroca who wrote draft code for some of diveMove’s functions. I am also greatly endebted to the regular contributors to the R-help newsgroup who helped me solve many problems during development.

References

Blackwell, S., C. A. Haverl, B. J. Le Boeuf, and D. P. Costa. 1999. “A Method for Calibrating Swim-Speed Recorders.” Mar Mamm Sci 15 (3): 894–905.
Langton, S. D., D. Collett, and R. M. Sibly. 1995. “Splitting Behaviour into Bouts; a Maximum Likelihood Approach.” Behaviour 132: 781–99.
Luque, S. P. 2007. “Diving Behaviour Analysis in R.” R News 7: 8–14.
Luque, S. P., and R. Fried. 2011. “Recursive Filtering for Zero Offset Correction of Diving Depth Time Series with GNU r Package diveMove.” PLoS ONE 6 (1): e15850. https://doi.org/doi:10.1371/journal.pone.0015850.
Luque, S. P., and C. Guinet. 2007. “A Maximum Likelihood Approach for Identifying Dive Bouts Improves Accuracy, Precision, and Objectivity.” Behaviour 144: 1315–32.

  1. They may result from animals resting at the surface of the water long enough to dry the sensors.↩︎

  2. Defaults to the depth range↩︎

  3. In fact, a TDRspeed object in this example↩︎

  4. The function that the method uses is actually plotTD, so all the possible arguments can be studied by reading the help page for plotTD↩︎

  5. This corresponds to the value given as the wet.thr argument to calibrateDepth().↩︎